kernel/linux.git/sound/soc/codecs, branch v6.18.35

ASoC: codecs: simple-mux: Fix enum control bounds check

2026-06-09T10:28:28+00:00

[ Upstream commit f63ad68e18d774a5d15cd7e405ead63f6b322679 ] simple_mux_control_put() rejects values greater than e->items, but enum control values are zero based. For the two-entry mux used by this driver, valid values are 0 and 1, so value 2 must be rejected as well. Accepting e->items can store an invalid mux state, pass it to the GPIO setter, and pass it on to the DAPM mux update path where it is used as an index into the enum text array. Use the same >= e->items check used by the ASoC enum helpers. Fixes: 342fbb7578d1 ("ASoC: add simple-mux") Signed-off-by: Cássio Gabriel Link: https://patch.msgid.link/20260527-asoc-simple-mux-enum-bounds-v1-1-3f805b9fc671@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: cs35l56: Fix flushing of IRQ work in cs35l56_sdw_remove()

2026-06-01T15:51:07+00:00

[ Upstream commit 18e7bd9f2446664053f8c34b72abd4606d22d858 ] Use flush_work() instead of cancel_work_sync() to terminate pending IRQ work in cs35l56_sdw_remove(). And flush_work() again after masking the interrupts to flush any queueing that was racing with the masking. This is the same sequence as cs35l56_sdw_system_suspend(). cs35l56_sdw_interrupt() takes the pm_runtime to prevent the bus powering- down before the interrupt status can be read and handled. The work releases this pm_runtime. So cancelling it, instead of flushing, could leave an unbalanced pm_runtime. Signed-off-by: Richard Fitzgerald Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56") Link: https://patch.msgid.link/20260521123057.988732-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: codecs: fs210x: fix possible buffer overflow

2026-06-01T15:51:01+00:00

[ Upstream commit 0d435a7ebcd4e97e47673c1ab6fb27f973a053ec ] In fs210x_effect_scene_info(), a string was copied like this: strscpy(DST, SRC, strlen(SRC) + 1); A buffer overflow would happen if strlen(SRC) >= sizeof(DST). Actually, strscpy() must be used this way: strscpy(DST, SRC, sizeof(DST)); strscpy(DST, SRC); // defaults to sizeof(DST) Fixes: 756117701779 ("ASoC: codecs: Add FourSemi FS2104/5S audio amplifier driver") Signed-off-by: Alexander A. Klimov Link: https://patch.msgid.link/20260513190852.196723-2-grandmaster@al2klimov.de Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: codecs: ab8500: Fix casting of private data

2026-05-23T11:07:11+00:00

[ Upstream commit a201aef1a88b675e9eb8487e27d14e2eef3cef80 ] ab8500_filter_controls[i].private_value is initialized using .private_value = (unsigned long)&(struct filter_control) {.count = xcount, .min = xmin, .max = xmax} thus it's a pointer to a struct filter_control casted to unsigned long. So to get back that pointer .private_data must be cast back, not its address. Fixes: 679d7abdc754 ("ASoC: codecs: Add AB8500 codec-driver") Signed-off-by: Christian A. Ehrhardt Signed-off-by: Uwe Kleine-König (The Capable Hub) Link: https://patch.msgid.link/20260428192255.2294705-2-u.kleine-koenig@baylibre.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: tas2770: Fix order of operations for temperature calculation

2026-05-23T11:07:08+00:00

[ Upstream commit c7ecb6a61908c2604dda6e42da66724d256de7b9 ] The order of operations to derive the temperature from the temp register values was wrong, since 1000 / 16 is not an integer. This resulted in the calculated temperature value deviating from the value represented by the registers slightly, which was most obvious when the registers were zeroed (-92.265 *C vs the expected -93.000 *C). Scale the reading before dividing the whole thing by 16 to correct this. Fixes: ff73e2780169 ("ASoC: tas2770: expose die temp to hwmon") Signed-off-by: James Calligeros Link: https://patch.msgid.link/20260425-tas27xx-hwmon-fixes-v1-3-83c13b8e8f54@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: tas2764: Mark die temp register as volatile

2026-05-23T11:07:08+00:00

[ Upstream commit 4cfb5971c2fbfac061c23fb4224a3a008199de81 ] Reading the temperature register always returns the first value read from the chip due to regcache. Mark TAS2764_TEMP as volatile to prevent returning stale, cached values when reading the die temp. Fixes: 186dfc85f9a8 ("ASoC: tas2764: expose die temp to hwmon") Signed-off-by: James Calligeros Link: https://patch.msgid.link/20260425-tas27xx-hwmon-fixes-v1-1-83c13b8e8f54@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: ES8389: convert to devm_clk_get_optional() to get clock

2026-05-14T13:30:18+00:00

commit 8ed3311131077712cdd0b3afec6909b9388ad3e4 upstream. When enabling ES8390 via ACPI description, es8389 would fail to obtain a clock source, causing the driver to fail to initialize. This was not an issue with older kernels, but since commit abae8e57e49a ("clk: generalize devm_clk_get() a bit"), devm_clk_get() would return an error pointer when a clock source was not detected (instead of falling back to a static clock), causing the driver to fail early. Use devm_clk_get_optional() instead to return to the previous behaviour, allowing the use of a static clock source. Cc: stable@vger.kernel.org Signed-off-by: Li Jian Link: https://patch.msgid.link/tencent_7C78374FB9F4B3A37101E5C719715D8BC40A@qq.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: sma1307: fix double free of devm_kzalloc() memory

2026-04-02T11:23:17+00:00

commit fe757092d2329c397ecb32f2bf68a5b1c4bd9193 upstream. A previous change added NULL checks and cleanup for allocation failures in sma1307_setting_loaded(). However, the cleanup for mode_set entries is wrong. Those entries are allocated with devm_kzalloc(), so they are device-managed resources and must not be freed with kfree(). Manually freeing them in the error path can lead to a double free when devres later releases the same memory. Drop the manual kfree() loop and let devres handle the cleanup. Fixes: 0ec6bd16705fe ("ASoC: sma1307: Add NULL check in sma1307_setting_loaded()") Cc: stable@vger.kernel.org Signed-off-by: Guangshuo Li Link: https://patch.msgid.link/20260313040611.391479-1-lgs201920130244@gmail.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: codecs: wcd934x: fix typo in dt parsing

2026-04-02T11:23:17+00:00

commit cfb385a8dc88d86a805a5682eaa68f59fa5c0ec3 upstream. Looks like we ended up with a typo during device tree data parsing as part of 4f16b6351bbff ("ASoC: codecs: wcd: add common helper for wcd codecs") patch. This will result in not parsing the device tree data and results in zero mic bias values. Fix this by calling wcd_dt_parse_micbias_info instead of wcd_dt_parse_mbhc_data. Fixes: 4f16b6351bbff ("ASoC: codecs: wcd: add common helper for wcd codecs") Cc: Stable@vger.kernel.org Reported-by: Joel Selvaraj Signed-off-by: Srinivas Kandagatla Reviewed-by: Konrad Dybcio Link: https://patch.msgid.link/20260323231748.2217967-1-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: adau1372: Fix clock leak on PLL lock failure

2026-04-02T11:23:15+00:00

[ Upstream commit bfe6a264effcb6fe99ad7ceaf9e8c7439fc9555b ] adau1372_enable_pll() was a void function that logged a dev_err() on PLL lock timeout but did not propagate the error. As a result, adau1372_set_power() would continue with adau1372->enabled set to true despite the PLL being unlocked, and the mclk left enabled with no corresponding disable on the error path. Convert adau1372_enable_pll() to return int, using -ETIMEDOUT on lock timeout and propagating regmap errors directly. In adau1372_set_power(), check the return value and unwind in reverse order: restore regcache to cache-only mode, reassert GPIO power-down, and disable the clock before returning the error. Signed-off-by: Jihed Chaibi Fixes: 6cd4c6459e47 ("ASoC: Add ADAU1372 audio CODEC support") Reviewed-by: Nuno Sá Link: https://patch.msgid.link/20260325210704.76847-3-jihed.chaibi.dev@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin