kernel/linux.git/sound/soc/codecs, branch v6.12.92

ASoC: cs35l56: Fix flushing of IRQ work in cs35l56_sdw_remove()

2026-06-01T15:46:33+00:00

[ Upstream commit 18e7bd9f2446664053f8c34b72abd4606d22d858 ] Use flush_work() instead of cancel_work_sync() to terminate pending IRQ work in cs35l56_sdw_remove(). And flush_work() again after masking the interrupts to flush any queueing that was racing with the masking. This is the same sequence as cs35l56_sdw_system_suspend(). cs35l56_sdw_interrupt() takes the pm_runtime to prevent the bus powering- down before the interrupt status can be read and handled. The work releases this pm_runtime. So cancelling it, instead of flushing, could leave an unbalanced pm_runtime. Signed-off-by: Richard Fitzgerald Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56") Link: https://patch.msgid.link/20260521123057.988732-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: codecs: ab8500: Fix casting of private data

2026-05-23T11:04:55+00:00

[ Upstream commit a201aef1a88b675e9eb8487e27d14e2eef3cef80 ] ab8500_filter_controls[i].private_value is initialized using .private_value = (unsigned long)&(struct filter_control) {.count = xcount, .min = xmin, .max = xmax} thus it's a pointer to a struct filter_control casted to unsigned long. So to get back that pointer .private_data must be cast back, not its address. Fixes: 679d7abdc754 ("ASoC: codecs: Add AB8500 codec-driver") Signed-off-by: Christian A. Ehrhardt Signed-off-by: Uwe Kleine-König (The Capable Hub) Link: https://patch.msgid.link/20260428192255.2294705-2-u.kleine-koenig@baylibre.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: ak4458: Convert to RUNTIME_PM_OPS() & co

2026-04-02T11:09:52+00:00

commit 9f9c8e9064ea8ceb13540a283f08550c097bb673 upstream. Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes and CONFIG_PM ifdefs. This optimizes slightly when CONFIG_PM is disabled, too. Signed-off-by: Takashi Iwai Reviewed-by: Charles Keepax Link: https://patch.msgid.link/20250317095603.20073-4-tiwai@suse.de Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: adau1372: Fix clock leak on PLL lock failure

2026-04-02T11:09:41+00:00

[ Upstream commit bfe6a264effcb6fe99ad7ceaf9e8c7439fc9555b ] adau1372_enable_pll() was a void function that logged a dev_err() on PLL lock timeout but did not propagate the error. As a result, adau1372_set_power() would continue with adau1372->enabled set to true despite the PLL being unlocked, and the mclk left enabled with no corresponding disable on the error path. Convert adau1372_enable_pll() to return int, using -ETIMEDOUT on lock timeout and propagating regmap errors directly. In adau1372_set_power(), check the return value and unwind in reverse order: restore regcache to cache-only mode, reassert GPIO power-down, and disable the clock before returning the error. Signed-off-by: Jihed Chaibi Fixes: 6cd4c6459e47 ("ASoC: Add ADAU1372 audio CODEC support") Reviewed-by: Nuno Sá Link: https://patch.msgid.link/20260325210704.76847-3-jihed.chaibi.dev@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: adau1372: Fix unchecked clk_prepare_enable() return value

2026-04-02T11:09:40+00:00

[ Upstream commit 326fe8104a4020d30080d37ac8b6b43893cdebca ] adau1372_set_power() calls clk_prepare_enable() but discards the return value. If the clock enable fails, the driver proceeds to access registers on unpowered hardware, potentially causing silent corruption. Make adau1372_set_power() return int and propagate the error from clk_prepare_enable(). Update adau1372_set_bias_level() to return the error directly for the STANDBY and OFF cases. Signed-off-by: Jihed Chaibi Fixes: 6cd4c6459e47 ("ASoC: Add ADAU1372 audio CODEC support") Reviewed-by: Nuno Sá Link: https://patch.msgid.link/20260325210704.76847-2-jihed.chaibi.dev@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: cs42l43: Report insert for exotic peripherals

2026-03-25T10:08:25+00:00

[ Upstream commit 6510e1324bcdc8caf21f6d17efe27604c48f0d64 ] For some exotic peripherals the type detect can return a reserved value of 0x4. This will currently return an error and not report anything to user-space, update this to report the insert normally. Signed-off-by: Charles Keepax Link: https://patch.msgid.link/20260223093616.3800350-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: es8328: Add error unwind in resume

2026-03-04T12:21:09+00:00

[ Upstream commit 8232e6079ae6f8d3a61d87973cb427385aa469b9 ] Handle failures in the resume path by unwinding previously enabled resources. If enabling regulators or syncing the regcache fails, disable regulators and unprepare the clock to avoid leaking resources and leaving the device in a partially resumed state. Signed-off-by: Hsieh Hung-En Link: https://patch.msgid.link/20260130160017.2630-6-hungen3108@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: codecs: max98390: Check return value of devm_gpiod_get_optional() in max98390_i2c_probe()

2026-03-04T12:21:08+00:00

[ Upstream commit a1d14d8364eac2611fe1391c73ff0e5b26064f0e ] The devm_gpiod_get_optional() function may return an error pointer (ERR_PTR) in case of a genuine failure during GPIO acquisition, not just NULL which indicates the legitimate absence of an optional GPIO. Add an IS_ERR() check after the function call to catch such errors and propagate them to the probe function, ensuring the driver fails to load safely rather than proceeding with an invalid pointer. Signed-off-by: Chen Ni Link: https://patch.msgid.link/20260130091904.3426149-1-nichen@iscas.ac.cn Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: wm8962: Don't report a microphone if it's shorted to ground on plug

2026-03-04T12:21:03+00:00

[ Upstream commit e590752119029d87ce46d725e11245a52d22e1fe ] This usually means that a TRS plug with no microphone pin has been plugged into a TRRS socket. Cases where a user is plugging in a microphone while pressing a button will be handled via incoming interrupt after the user releases the button, so the microphone will still be detected once it becomes usable. Signed-off-by: Sebastian Krzyszkowiak Reviewed-by: Charles Keepax Link: https://patch.msgid.link/20260105-wm8962-l5-fixes-v1-3-f4f4eeacf089@puri.sm Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

ASoC: wm8962: Add WM8962_ADC_MONOMIX to "3D Coefficients" mask

2026-03-04T12:21:02+00:00

[ Upstream commit 66c26346ae30c883eef70acf9cf9054dfdb4fb2f ] This bit is handled by a separate control. Signed-off-by: Sebastian Krzyszkowiak Reviewed-by: Charles Keepax Link: https://patch.msgid.link/20260105-wm8962-l5-fixes-v1-1-f4f4eeacf089@puri.sm Signed-off-by: Mark Brown Signed-off-by: Sasha Levin