kernel/linux.git/sound/aoa, branch v6.6.141

ALSA: aoa: Skip devices with no codecs in i2sbus_resume()

2026-05-17T15:13:49+00:00

[ Upstream commit fd7df93013c5118812e63a52635dc6c3a805a1de ] In i2sbus_resume(), skip devices with an empty codec list, which avoids using an uninitialized 'sysclock_factor' in the 32-bit format path in i2sbus_pcm_prepare(). In i2sbus_pcm_prepare(), replace two list_for_each_entry() loops with a single list_first_entry() now that the codec list is guaranteed to be non-empty by all callers. Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa") Cc: stable@vger.kernel.org Signed-off-by: Thorsten Blum Link: https://patch.msgid.link/20260310102921.210109-3-thorsten.blum@linux.dev Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ALSA: aoa: i2sbus: clear stale prepared state

2026-05-17T15:13:48+00:00

[ Upstream commit 5ed060d5491597490fb53ec69da3edc4b1e8c165 ] The i2sbus PCM code uses pi->active to constrain the sibling stream to an already prepared duplex format and rate in i2sbus_pcm_open(). That state is set from i2sbus_pcm_prepare(), but the current code only clears it on close. As a result, the sibling stream can inherit stale constraints after the prepared state has been torn down. Clear pi->active when hw_params() or hw_free() tears down the prepared state, and set it again only after prepare succeeds. Replace the stale FIXME in the duplex constraint comment with a description of the current driver behavior: i2sbus still programs a single shared transport configuration for both directions, so mixed formats are not supported in duplex mode. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202604010125.AvkWBYKI-lkp@intel.com/ Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa") Cc: stable@vger.kernel.org Signed-off-by: Cássio Gabriel Link: https://patch.msgid.link/20260331-aoa-i2sbus-clear-stale-active-v2-1-3764ae2889a1@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ALSA: aoa: Use guard() for mutex locks

2026-05-17T15:13:48+00:00

[ Upstream commit 1cb6ecbb372002ef9e531c5377e5f60122411e40 ] Replace the manual mutex lock/unlock pairs with guard() for code simplification. Only code refactoring, and no behavior change. Signed-off-by: Takashi Iwai Link: https://patch.msgid.link/20250829151335.7342-14-tiwai@suse.de Stable-dep-of: 5ed060d54915 ("ALSA: aoa: i2sbus: clear stale prepared state") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ALSA: aoa: i2sbus: fix OF node lifetime handling

2026-05-17T15:13:28+00:00

commit 4ec93f070eda6b765b62efcaed9241c3b3b0b6ad upstream. i2sbus_add_dev() keeps the matched "sound" child pointer after for_each_child_of_node() has dropped the iterator reference. Take an extra reference before saving that node and drop it after the layout-id/device-id lookup is complete. The function also stores np in dev->sound.ofdev.dev.of_node without taking a reference for the embedded soundbus device. Since i2sbus overrides the embedded platform device release callback, balance that reference explicitly in the local error path and in i2sbus_release_dev(). Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa") Cc: stable@vger.kernel.org Signed-off-by: Cássio Gabriel Link: https://patch.msgid.link/20260330-aoa-i2sbus-ofnode-lifetime-v1-1-51c309f4ff06@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: aoa: Fix typos in PCM fix patch

2023-08-18T07:09:39+00:00

There was typos in the previous fix for PCM to detach the struct device that caused build errors. Corrected here. Fixes: bc41a7228ced ("ALSA: pcm: Don't embed device") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202308181347.q3XPr3Lm-lkp@intel.com/ Link: https://lore.kernel.org/r/20230818070913.23336-1-tiwai@suse.de Signed-off-by: Takashi Iwai

ALSA: pcm: Don't embed device

2023-08-17T07:23:45+00:00

So far we use the embedded struct device for each PCM substreams in struct snd_pcm. This may result in UAF when the delayed kobj release is used; each corresponding struct device is still accessed at the (delayed) device release, while the snd_pcm object may be already gone. As a workaround, detach the struct device from the snd_pcm object by allocating via the new snd_device_alloc() helper. A caveat is that we store the PCM substream pointer to drvdata since the device resume and others require the access to it. This patch is based on the fix Curtis posted initially. In this patch, the changes are split and use the new helper function instead. Link: https://lore.kernel.org/r/20230801171928.1460120-1-cujomalainey@chromium.org Reviewed-by: Jaroslav Kysela Signed-off-by: Curtis Malainey Tested-by: Curtis Malainey Link: https://lore.kernel.org/r/20230816160252.23396-4-tiwai@suse.de Signed-off-by: Takashi Iwai

ALSA: Switch i2c drivers back to use .probe()

2023-06-05T07:22:45+00:00

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König Reviewed-by: Luca Ceresoli Link: https://lore.kernel.org/r/20230525203640.677826-1-u.kleine-koenig@pengutronix.de Signed-off-by: Takashi Iwai

Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2023-02-24T20:58:55+00:00

Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.3-rc1. There's a lot of changes this development cycle, most of the work falls into two different categories: - fw_devlink fixes and updates. This has gone through numerous review cycles and lots of review and testing by lots of different devices. Hopefully all should be good now, and Saravana will be keeping a watch for any potential regression on odd embedded systems. - driver core changes to work to make struct bus_type able to be moved into read-only memory (i.e. const) The recent work with Rust has pointed out a number of areas in the driver core where we are passing around and working with structures that really do not have to be dynamic at all, and they should be able to be read-only making things safer overall. This is the contuation of that work (started last release with kobject changes) in moving struct bus_type to be constant. We didn't quite make it for this release, but the remaining patches will be finished up for the release after this one, but the groundwork has been laid for this effort. Other than that we have in here: - debugfs memory leak fixes in some subsystems - error path cleanups and fixes for some never-able-to-be-hit codepaths. - cacheinfo rework and fixes - Other tiny fixes, full details are in the shortlog All of these have been in linux-next for a while with no reported problems" [ Geert Uytterhoeven points out that that last sentence isn't true, and that there's a pending report that has a fix that is queued up - Linus ] * tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits) debugfs: drop inline constant formatting for ERR_PTR(-ERROR) OPP: fix error checking in opp_migrate_dentry() debugfs: update comment of debugfs_rename() i3c: fix device.h kernel-doc warnings dma-mapping: no need to pass a bus_type into get_arch_dma_ops() driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place Revert "driver core: add error handling for devtmpfs_create_node()" Revert "devtmpfs: add debug info to handle()" Revert "devtmpfs: remove return value of devtmpfs_delete_node()" driver core: cpu: don't hand-override the uevent bus_type callback. devtmpfs: remove return value of devtmpfs_delete_node() devtmpfs: add debug info to handle() driver core: add error handling for devtmpfs_create_node() driver core: bus: update my copyright notice driver core: bus: add bus_get_dev_root() function driver core: bus: constify bus_unregister() driver core: bus: constify some internal functions driver core: bus: constify bus_get_kset() driver core: bus: constify bus_register/unregister_notifier() driver core: remove private pointer from struct bus_type ...

driver core: make struct bus_type.uevent() take a const *

2023-01-27T12:45:52+00:00

The uevent() callback in struct bus_type should not be modifying the device that is passed into it, so mark it as a const * and propagate the function signature changes out into all relevant subsystems that use this callback. Acked-by: Rafael J. Wysocki Acked-by: Hans de Goede Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

ALSA: aoa: make remove callback of soundbus driver void returned

2023-01-25T08:34:29+00:00

Since commit fc7a6209d571 ("bus: Make remove callback return void") forces bus_type::remove be void-returned, it doesn't make much sense for any bus based driver implementing remove callbalk to return non-void to its caller. As such, change the remove function for soundbus based drivers to return void. Signed-off-by: Dawei Li Link: https://lore.kernel.org/r/TYCP286MB23234FED40A3AE6797DEBAB7CAFB9@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM Signed-off-by: Takashi Iwai