kernel/linux.git/security/integrity, branch v5.18.16

lockdown: Fix kexec lockdown bypass with ima policy

2022-07-29T15:27:55+00:00

commit 543ce63b664e2c2f9533d089a4664b559c3e6b5b upstream. The lockdown LSM is primarily used in conjunction with UEFI Secure Boot. This LSM may also be used on machines without UEFI. It can also be enabled when UEFI Secure Boot is disabled. One of lockdown's features is to prevent kexec from loading untrusted kernels. Lockdown can be enabled through a bootparam or after the kernel has booted through securityfs. If IMA appraisal is used with the "ima_appraise=log" boot param, lockdown can be defeated with kexec on any machine when Secure Boot is disabled or unavailable. IMA prevents setting "ima_appraise=log" from the boot param when Secure Boot is enabled, but this does not cover cases where lockdown is used without Secure Boot. To defeat lockdown, boot without Secure Boot and add ima_appraise=log to the kernel command line; then: $ echo "integrity" > /sys/kernel/security/lockdown $ echo "appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig" > \ /sys/kernel/security/ima/policy $ kexec -ls unsigned-kernel Add a call to verify ima appraisal is set to "enforce" whenever lockdown is enabled. This fixes CVE-2022-21505. Cc: stable@vger.kernel.org Fixes: 29d3c1c8dfe7 ("kexec: Allow kexec_file() with appropriate IMA policy when locked down") Signed-off-by: Eric Snowberg Acked-by: Mimi Zohar Reviewed-by: John Haxby Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

ima: Fix potential memory leak in ima_init_crypto()

2022-07-22T08:21:41+00:00

[ Upstream commit 067d2521874135267e681c19d42761c601d503d6 ] On failure to allocate the SHA1 tfm, IMA fails to initialize and exits without freeing the ima_algo_array. Add the missing kfree() for ima_algo_array to avoid the potential memory leak. Signed-off-by: Jianglei Nie Fixes: 6d94809af6b0 ("ima: Allocate and initialize tfm for each PCR bank") Signed-off-by: Mimi Zohar Signed-off-by: Sasha Levin

ima: force signature verification when CONFIG_KEXEC_SIG is configured

2022-07-22T08:21:40+00:00

[ Upstream commit af16df54b89dee72df253abc5e7b5e8a6d16c11c ] Currently, an unsigned kernel could be kexec'ed when IMA arch specific policy is configured unless lockdown is enabled. Enforce kernel signature verification check in the kexec_file_load syscall when IMA arch specific policy is configured. Fixes: 99d5cadfde2b ("kexec_file: split KEXEC_VERIFY_SIG into KEXEC_SIG and KEXEC_SIG_FORCE") Reported-and-suggested-by: Mimi Zohar Signed-off-by: Coiby Xu Signed-off-by: Mimi Zohar Signed-off-by: Sasha Levin

ima: Fix a potential integer overflow in ima_appraise_measurement

2022-07-22T08:21:26+00:00

[ Upstream commit d2ee2cfc4aa85ff6a2a3b198a3a524ec54e3d999 ] When the ima-modsig is enabled, the rc passed to evm_verifyxattr() may be negative, which may cause the integer overflow problem. Fixes: 39b07096364a ("ima: Implement support for module-style appended signatures") Signed-off-by: Huaxin Lu Signed-off-by: Mimi Zohar Signed-off-by: Sasha Levin

Revert "evm: Fix memleak in init_desc"

2022-07-22T08:21:22+00:00

commit 51dd64bb99e4478fc5280171acd8e1b529eadaf7 upstream. This reverts commit ccf11dbaa07b328fa469415c362d33459c140a37. Commit ccf11dbaa07b ("evm: Fix memleak in init_desc") said there is memleak in init_desc. That may be incorrect, as we can see, tmp_tfm is saved in one of the two global variables hmac_tfm or evm_tfm[hash_algo], then if init_desc is called next time, there is no need to alloc tfm again, so in the error path of kmalloc desc or crypto_shash_init(desc), It is not a problem without freeing tmp_tfm. And also that commit did not reset the global variable to NULL after freeing tmp_tfm and this makes *tfm a dangling pointer which may cause a UAF issue. Reported-by: Guozihua (Scott) Signed-off-by: Xiu Jianfeng Signed-off-by: Mimi Zohar Signed-off-by: Greg Kroah-Hartman

ima: remove the IMA_TEMPLATE Kconfig option

2022-06-09T08:30:49+00:00

commit 891163adf180bc369b2f11c9dfce6d2758d2a5bd upstream. The original 'ima' measurement list template contains a hash, defined as 20 bytes, and a null terminated pathname, limited to 255 characters. Other measurement list templates permit both larger hashes and longer pathnames. When the "ima" template is configured as the default, a new measurement list template (ima_template=) must be specified before specifying a larger hash algorithm (ima_hash=) on the boot command line. To avoid this boot command line ordering issue, remove the legacy "ima" template configuration option, allowing it to still be specified on the boot command line. The root cause of this issue is that during the processing of ima_hash, we would try to check whether the hash algorithm is compatible with the template. If the template is not set at the moment we do the check, we check the algorithm against the configured default template. If the default template is "ima", then we reject any hash algorithm other than sha1 and md5. For example, if the compiled default template is "ima", and the default algorithm is sha1 (which is the current default). In the cmdline, we put in "ima_hash=sha256 ima_template=ima-ng". The expected behavior would be that ima starts with ima-ng as the template and sha256 as the hash algorithm. However, during the processing of "ima_hash=", "ima_template=" has not been processed yet, and hash_setup would check the configured hash algorithm against the compiled default: ima, and reject sha256. So at the end, the hash algorithm that is actually used will be sha1. With template "ima" removed from the configured default, we ensure that the default tempalte would at least be "ima-ng" which allows for basically any hash algorithm. This change would not break the algorithm compatibility checks for IMA. Fixes: 4286587dccd43 ("ima: add Kconfig default measurement list template") Signed-off-by: GUO Zihua Cc: Signed-off-by: Mimi Zohar Signed-off-by: Greg Kroah-Hartman

efi: Do not import certificates from UEFI Secure Boot for T2 Macs

2022-06-09T08:30:41+00:00

commit 155ca952c7ca19aa32ecfb7373a32bbc2e1ec6eb upstream. On Apple T2 Macs, when Linux attempts to read the db and dbx efi variables at early boot to load UEFI Secure Boot certificates, a page fault occurs in Apple firmware code and EFI runtime services are disabled with the following logs: [Firmware Bug]: Page fault caused by firmware at PA: 0xffffb1edc0068000 WARNING: CPU: 3 PID: 104 at arch/x86/platform/efi/quirks.c:735 efi_crash_gracefully_on_page_fault+0x50/0xf0 (Removed some logs from here) Call Trace: page_fault_oops+0x4f/0x2c0 ? search_bpf_extables+0x6b/0x80 ? search_module_extables+0x50/0x80 ? search_exception_tables+0x5b/0x60 kernelmode_fixup_or_oops+0x9e/0x110 __bad_area_nosemaphore+0x155/0x190 bad_area_nosemaphore+0x16/0x20 do_kern_addr_fault+0x8c/0xa0 exc_page_fault+0xd8/0x180 asm_exc_page_fault+0x1e/0x30 (Removed some logs from here) ? __efi_call+0x28/0x30 ? switch_mm+0x20/0x30 ? efi_call_rts+0x19a/0x8e0 ? process_one_work+0x222/0x3f0 ? worker_thread+0x4a/0x3d0 ? kthread+0x17a/0x1a0 ? process_one_work+0x3f0/0x3f0 ? set_kthread_struct+0x40/0x40 ? ret_from_fork+0x22/0x30 ---[ end trace 1f82023595a5927f ]--- efi: Froze efi_rts_wq and disabled EFI Runtime Services integrity: Couldn't get size: 0x8000000000000015 integrity: MODSIGN: Couldn't get UEFI db list efi: EFI Runtime Services are disabled! integrity: Couldn't get size: 0x8000000000000015 integrity: Couldn't get UEFI dbx list integrity: Couldn't get size: 0x8000000000000015 integrity: Couldn't get mokx list integrity: Couldn't get size: 0x80000000 So we avoid reading these UEFI variables and thus prevent the crash. Cc: stable@vger.kernel.org Signed-off-by: Aditya Garg Reviewed-by: Mimi Zohar Signed-off-by: Mimi Zohar Signed-off-by: Greg Kroah-Hartman

Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2022-03-24T20:13:26+00:00

Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ...

Merge tag 'integrity-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity

2022-03-22T03:44:37+00:00

Pull integrity subsystem updates from Mimi Zohar: "Except for extending the 'encrypted' key type to support user provided data, the rest is code cleanup, __setup() usage bug fix, and a trivial change" * tag 'integrity-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: MAINTAINERS: add missing security/integrity/platform_certs EVM: fix the evm= __setup handler return value KEYS: encrypted: Instantiate key with user-provided decrypted data ima: define ima_max_digest_data struct without a flexible array variable ima: rename IMA_ACTION_FLAGS to IMA_NONACTION_FLAGS ima: Return error code obtained from securityfs functions MAINTAINERS: add missing "security/integrity" directory ima: Fix trivial typos in the comments

Merge tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block

2022-03-21T23:48:55+00:00

Pull block updates from Jens Axboe: - BFQ cleanups and fixes (Yu, Zhang, Yahu, Paolo) - blk-rq-qos completion fix (Tejun) - blk-cgroup merge fix (Tejun) - Add offline error return value to distinguish it from an IO error on the device (Song) - IO stats fixes (Zhang, Christoph) - blkcg refcount fixes (Ming, Yu) - Fix for indefinite dispatch loop softlockup (Shin'ichiro) - blk-mq hardware queue management improvements (Ming) - sbitmap dead code removal (Ming, John) - Plugging merge improvements (me) - Show blk-crypto capabilities in sysfs (Eric) - Multiple delayed queue run improvement (David) - Block throttling fixes (Ming) - Start deprecating auto module loading based on dev_t (Christoph) - bio allocation improvements (Christoph, Chaitanya) - Get rid of bio_devname (Christoph) - bio clone improvements (Christoph) - Block plugging improvements (Christoph) - Get rid of genhd.h header (Christoph) - Ensure drivers use appropriate flush helpers (Christoph) - Refcounting improvements (Christoph) - Queue initialization and teardown improvements (Ming, Christoph) - Misc fixes/improvements (Barry, Chaitanya, Colin, Dan, Jiapeng, Lukas, Nian, Yang, Eric, Chengming) * tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block: (127 commits) block: cancel all throttled bios in del_gendisk() block: let blkcg_gq grab request queue's refcnt block: avoid use-after-free on throttle data block: limit request dispatch loop duration block/bfq-iosched: Fix spelling mistake "tenative" -> "tentative" sr: simplify the local variable initialization in sr_block_open() block: don't merge across cgroup boundaries if blkcg is enabled block: fix rq-qos breakage from skipping rq_qos_done_bio() block: flush plug based on hardware and software queue order block: ensure plug merging checks the correct queue at least once block: move rq_qos_exit() into disk_release() block: do more work in elevator_exit block: move blk_exit_queue into disk_release block: move q_usage_counter release into blk_queue_release block: don't remove hctx debugfs dir from blk_mq_exit_queue block: move blkcg initialization/destroy into disk allocation/release handler sr: implement ->free_disk to simplify refcounting sd: implement ->free_disk to simplify refcounting sd: delay calling free_opal_dev sd: call sd_zbc_release_disk before releasing the scsi_device reference ...