kernel/linux.git/scripts, branch v5.8.14

scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting

2020-10-07T06:02:53+00:00

[ Upstream commit efe84d408bf41975db8506d3a1cc02e794e2309c ] When building with $ HOST_EXTRACFLAGS=-g make the expectation is that host tools are built with debug informations. This however doesn't happen if the Makefile assigns a new value to the HOST_EXTRACFLAGS instead of appending to it. So use += instead of := for the first assignment. Fixes: e3fd9b5384f3 ("scripts/dtc: consolidate include path options in Makefile") Signed-off-by: Uwe Kleine-König Signed-off-by: Rob Herring Signed-off-by: Sasha Levin

scripts/kallsyms: skip ppc compiler stub .long_branch. / .plt_branch.

2020-10-07T06:02:50+00:00

[ Upstream commit 516d980f85415d76ae3d0d2a871eb20243f46c95 ] PowerPC allmodconfig often fails to build as follows: LD .tmp_vmlinux.kallsyms1 KSYM .tmp_vmlinux.kallsyms1.o LD .tmp_vmlinux.kallsyms2 KSYM .tmp_vmlinux.kallsyms2.o LD .tmp_vmlinux.kallsyms3 KSYM .tmp_vmlinux.kallsyms3.o LD vmlinux SORTTAB vmlinux SYSMAP System.map Inconsistent kallsyms data Try make KALLSYMS_EXTRA_PASS=1 as a workaround make[2]: *** [../Makefile:1162: vmlinux] Error 1 Setting KALLSYMS_EXTRA_PASS=1 does not help. This is caused by the compiler inserting stubs such as *.long_branch.* and *.plt_branch.* $ powerpc-linux-nm -n .tmp_vmlinux.kallsyms2 [ snip ] c00000000210c010 t 00000075.plt_branch.da9:19 c00000000210c020 t 00000075.plt_branch.1677:5 c00000000210c030 t 00000075.long_branch.memmove c00000000210c034 t 00000075.plt_branch.9e0:5 c00000000210c044 t 00000075.plt_branch.free_initrd_mem ... Actually, the problem mentioned in scripts/link-vmlinux.sh comments; "In theory it's possible this results in even more stubs, but unlikely" is happening here, and ends up with another kallsyms step required. scripts/kallsyms.c already ignores various compiler stubs. Let's do similar to make kallsysms for PowerPC always succeed in 2 steps. Reported-by: Guenter Roeck Signed-off-by: Masahiro Yamada Tested-by: Guenter Roeck Signed-off-by: Sasha Levin

kconfig: qconf: use delete[] instead of delete to free array (again)

2020-09-23T10:59:58+00:00

[ Upstream commit a608b6a646e8816bc0db156baad2e0679fa4d137 ] Commit c9b09a9249e6 ("kconfig: qconf: use delete[] instead of delete to free array") fixed two lines, but there is one more. (cppcheck does not report it for some reason...) This was detected by Clang. "make HOSTCXX=clang++ xconfig" reports the following: scripts/kconfig/qconf.cc:1279:2: warning: 'delete' applied to a pointer that was allocated with 'new[]'; did you mean 'delete[]'? [-Wmismatched-new-delete] delete data; ^ [] scripts/kconfig/qconf.cc:1239:15: note: allocated with 'new[]' here char *data = new char[count + 1]; ^ Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again") Fixes: c9b09a9249e6 ("kconfig: qconf: use delete[] instead of delete to free array") Signed-off-by: Masahiro Yamada Reviewed-by: Nick Desaulniers Signed-off-by: Sasha Levin

checkpatch: fix the usage of capture group ( ... )

2020-09-09T17:14:33+00:00

commit 13e45417cedbfc44b1926124b1846f5ee8c6ba4a upstream. The usage of "capture group (...)" in the immediate condition after `&&` results in `$1` being uninitialized. This issues a warning "Use of uninitialized value $1 in regexp compilation at ./scripts/checkpatch.pl line 2638". I noticed this bug while running checkpatch on the set of commits from v5.7 to v5.8-rc1 of the kernel on the commits with a diff content in their commit message. This bug was introduced in the script by commit e518e9a59ec3 ("checkpatch: emit an error when there's a diff in a changelog"). It has been in the script since then. The author intended to store the match made by capture group in variable `$1`. This should have contained the name of the file as `[\w/]+` matched. However, this couldn't be accomplished due to usage of capture group and `$1` in the same regular expression. Fix this by placing the capture group in the condition before `&&`. Thus, `$1` can be initialized to the text that capture group matches thereby setting it to the desired and required value. Fixes: e518e9a59ec3 ("checkpatch: emit an error when there's a diff in a changelog") Signed-off-by: Mrinal Pandey Signed-off-by: Andrew Morton Tested-by: Lukas Bulwahn Reviewed-by: Lukas Bulwahn Cc: Joe Perches Link: https://lkml.kernel.org/r/20200714032352.f476hanaj2dlmiot@mrinalpandey Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

kconfig: streamline_config.pl: check defined(ENV variable) before using it

2020-09-09T17:14:33+00:00

commit a73fbfce2cc28883f659414d598e6e60ca2214b4 upstream. A user reported: 'Use of uninitialized value $ENV{"LMC_KEEP"} in split at ./scripts/kconfig/streamline_config.pl line 596.' so first check that $ENV{LMC_KEEP} is defined before trying to use it. Fixes: c027b02d89fd ("streamline_config.pl: add LMC_KEEP to preserve some kconfigs") Signed-off-by: Randy Dunlap Acked-by: Steven Rostedt (VMware) Signed-off-by: Masahiro Yamada Signed-off-by: Greg Kroah-Hartman

kconfig: qconf: remove qInfo() to get back Qt4 support

2020-08-26T09:49:16+00:00

[ Upstream commit 53efe2e76ca2bfad7f35e0b5330e2ccd44a643e3 ] qconf is supposed to work with Qt4 and Qt5, but since commit c4f7398bee9c ("kconfig: qconf: make debug links work again"), building with Qt4 fails as follows: HOSTCXX scripts/kconfig/qconf.o scripts/kconfig/qconf.cc: In member function ‘void ConfigInfoView::clicked(const QUrl&)’: scripts/kconfig/qconf.cc:1241:3: error: ‘qInfo’ was not declared in this scope; did you mean ‘setInfo’? 1241 | qInfo() << "Clicked link is empty"; | ^~~~~ | setInfo scripts/kconfig/qconf.cc:1254:3: error: ‘qInfo’ was not declared in this scope; did you mean ‘setInfo’? 1254 | qInfo() << "Clicked symbol is invalid:" << data; | ^~~~~ | setInfo make[1]: *** [scripts/Makefile.host:129: scripts/kconfig/qconf.o] Error 1 make: *** [Makefile:606: xconfig] Error 2 qInfo() does not exist in Qt4. In my understanding, these call-sites should be unreachable. Perhaps, qWarning(), assertion, or something is better, but qInfo() is not the right one to use here, I think. Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again") Reported-by: Ronald Warsow Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

kconfig: qconf: fix signal connection to invalid slots

2020-08-26T09:49:15+00:00

[ Upstream commit d85de3399f97467baa2026fbbbe587850d01ba8a ] If you right-click in the ConfigList window, you will see the following messages in the console: QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:888 QObject::connect: (sender name: 'config') QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:897 QObject::connect: (sender name: 'config') QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:906 QObject::connect: (sender name: 'config') Right, there is no such slot in QAction. I think this is a typo of setChecked. Due to this bug, when you toggled the menu "Option->Show Name/Range/Data" the state of the context menu was not previously updated. Fix this. Fixes: d5d973c3f8a9 ("Port xconfig to Qt5 - Put back some of the old implementation(part 2)") Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

kconfig: qconf: do not limit the pop-up menu to the first row

2020-08-26T09:49:15+00:00

[ Upstream commit fa8de0a3bf3c02e6f00b7746e7e934db522cdda9 ] If you right-click the first row in the option tree, the pop-up menu shows up, but if you right-click the second row or below, the event is ignored due to the following check: if (e->y() <= header()->geometry().bottom()) { Perhaps, the intention was to show the pop-menu only when the tree header was right-clicked, but this handler is not called in that case. Since the origin of e->y() starts from the bottom of the header, this check is odd. Going forward, you can right-click anywhere in the tree to get the pop-up menu. Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

recordmcount: Fix build failure on non arm64

2020-08-21T11:15:16+00:00

[ Upstream commit 3df14264ad9930733a8166e5bd0eccc1727564bb ] Commit ea0eada45632 leads to the following build failure on powerpc: HOSTCC scripts/recordmcount scripts/recordmcount.c: In function 'arm64_is_fake_mcount': scripts/recordmcount.c:440: error: 'R_AARCH64_CALL26' undeclared (first use in this function) scripts/recordmcount.c:440: error: (Each undeclared identifier is reported only once scripts/recordmcount.c:440: error: for each function it appears in.) make[2]: *** [scripts/recordmcount] Error 1 Make sure R_AARCH64_CALL26 is always defined. Fixes: ea0eada45632 ("recordmcount: only record relocation of type R_AARCH64_CALL26 on arm64.") Signed-off-by: Christophe Leroy Acked-by: Steven Rostedt (VMware) Acked-by: Gregory Herrero Cc: Gregory Herrero Link: https://lore.kernel.org/r/5ca1be21fa6ebf73203b45fd9aadd2bafb5e6b15.1597049145.git.christophe.leroy@csgroup.eu Signed-off-by: Catalin Marinas Signed-off-by: Sasha Levin

scripts/selinux/mdp: fix initial SID handling

2020-08-19T06:26:12+00:00

[ Upstream commit 382c2b5d23b4245f1818f69286db334355488dc4 ] commit e3e0b582c321 ("selinux: remove unused initial SIDs and improve handling") broke scripts/selinux/mdp since the unused initial SID names were removed and the corresponding generation of policy initial SID definitions by mdp was not updated accordingly. Fix it. With latest upstream checkpolicy it is no longer necessary to include the SID context definitions for the unused initial SIDs but retain them for compatibility with older checkpolicy. Fixes: e3e0b582c321 ("selinux: remove unused initial SIDs and improve handling") Signed-off-by: Stephen Smalley Signed-off-by: Paul Moore Signed-off-by: Sasha Levin

kernel/linux.git/scripts, branch v5.8.14

scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting

scripts/kallsyms: skip ppc compiler stub *.long_branch.* / *.plt_branch.*

kconfig: qconf: use delete[] instead of delete to free array (again)

checkpatch: fix the usage of capture group ( ... )

kconfig: streamline_config.pl: check defined(ENV variable) before using it

kconfig: qconf: remove qInfo() to get back Qt4 support

kconfig: qconf: fix signal connection to invalid slots

kconfig: qconf: do not limit the pop-up menu to the first row

recordmcount: Fix build failure on non arm64

scripts/selinux/mdp: fix initial SID handling

scripts/kallsyms: skip ppc compiler stub .long_branch. / .plt_branch.