kernel/linux.git/scripts, branch v5.4.50

recordmcount: support >64k sections

2020-06-30T19:37:05+00:00

[ Upstream commit 4ef57b21d6fb49d2b25c47e4cff467a0c2c8b6b7 ] When compiling a kernel with Clang and LTO, we need to run recordmcount on vmlinux.o with a large number of sections, which currently fails as the program doesn't understand extended section indexes. This change adds support for processing binaries with >64k sections. Link: https://lkml.kernel.org/r/20200424193046.160744-1-samitolvanen@google.com Link: https://lore.kernel.org/lkml/CAK7LNARbZhoaA=Nnuw0=gBrkuKbr_4Ng_Ei57uafujZf7Xazgw@mail.gmail.com/ Cc: Kees Cook Reviewed-by: Matt Helsley Signed-off-by: Sami Tolvanen Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Sasha Levin

kbuild: improve cc-option to clean up all temporary files

2020-06-30T19:37:05+00:00

[ Upstream commit f2f02ebd8f3833626642688b2d2c6a7b3c141fa9 ] When cc-option and friends evaluate compiler flags, the temporary file $$TMP is created as an output object, and automatically cleaned up. The actual file path of $$TMP is ..tmp, here is the process ID of $(shell ...) invoked from cc-option. (Please note $$$$ is the escape sequence of $$). Such garbage files are cleaned up in most cases, but some compiler flags create additional output files. For example, -gsplit-dwarf creates a .dwo file. When CONFIG_DEBUG_INFO_SPLIT=y, you will see a bunch of ..dwo files left in the top of build directories. You may not notice them unless you do 'ls -a', but the garbage files will increase every time you run 'make'. This commit changes the temporary object path to .tmp_/tmp, and removes .tmp_ directory when exiting. Separate build artifacts such as *.dwo will be cleaned up all together because their file paths are usually determined based on the base name of the object. Another example is -ftest-coverage, which outputs the coverage data into .gcno Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

scripts: headers_install: Exit with error on config leak

2020-06-24T15:50:33+00:00

[ Upstream commit 5967577231f9b19acd5a59485e9075964065bbe3 ] Misuse of CONFIG_* in UAPI headers should result in an error. These config options can be set in userspace by the user application which includes these headers to control the APIs and structures being used in a kernel which supports multiple targets. Signed-off-by: Siddharth Gupta Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

mksysmap: Fix the mismatch of '.L' symbols in System.map

2020-06-24T15:50:19+00:00

[ Upstream commit 72d24accf02add25e08733f0ecc93cf10fcbd88c ] When System.map was generated, the kernel used mksysmap to filter the kernel symbols, but all the symbols with the second letter 'L' in the kernel were filtered out, not just the symbols starting with 'dot + L'. For example: ashimida@ubuntu:~/linux$ cat System.map |grep ' .L' ashimida@ubuntu:~/linux$ nm -n vmlinux |grep ' .L' ffff0000088028e0 t bLength_show ...... ffff0000092e0408 b PLLP_OUTC_lock ffff0000092e0410 b PLLP_OUTA_lock The original intent should be to filter out all local symbols starting with '.L', so the dot should be escaped. Fixes: 00902e984732 ("mksysmap: Add h8300 local symbol pattern") Signed-off-by: ashimida Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

bpf: Support llvm-objcopy for vmlinux BTF

2020-06-17T14:40:20+00:00

commit 90ceddcb495008ac8ba7a3dce297841efcd7d584 upstream. Simplify gen_btf logic to make it work with llvm-objcopy. The existing 'file format' and 'architecture' parsing logic is brittle and does not work with llvm-objcopy/llvm-objdump. 'file format' output of llvm-objdump>=11 will match GNU objdump, but 'architecture' (bfdarch) may not. .BTF in .tmp_vmlinux.btf is non-SHF_ALLOC. Add the SHF_ALLOC flag because it is part of vmlinux image used for introspection. C code can reference the section via linker script defined __start_BTF and __stop_BTF. This fixes a small problem that previous .BTF had the SHF_WRITE flag (objcopy -I binary -O elf* synthesized .data). Additionally, `objcopy -I binary` synthesized symbols _binary__btf_vmlinux_bin_start and _binary__btf_vmlinux_bin_stop (not used elsewhere) are replaced with more commonplace __start_BTF and __stop_BTF. Add 2>/dev/null because GNU objcopy (but not llvm-objcopy) warns "empty loadable segment detected at vaddr=0xffffffff81000000, is this intentional?" We use a dd command to change the e_type field in the ELF header from ET_EXEC to ET_REL so that lld will accept .btf.vmlinux.bin.o. Accepting ET_EXEC as an input file is an extremely rare GNU ld feature that lld does not intend to support, because this is error-prone. The output section description .BTF in include/asm-generic/vmlinux.lds.h avoids potential subtle orphan section placement issues and suppresses --orphan-handling=warn warnings. Fixes: df786c9b9476 ("bpf: Force .BTF section start to zero when dumping from vmlinux") Fixes: cb0cc635c7a9 ("powerpc: Include .BTF section") Reported-by: Nathan Chancellor Signed-off-by: Fangrui Song Signed-off-by: Daniel Borkmann Tested-by: Stanislav Fomichev Tested-by: Andrii Nakryiko Reviewed-by: Stanislav Fomichev Reviewed-by: Kees Cook Acked-by: Andrii Nakryiko Acked-by: Michael Ellerman (powerpc) Link: https://github.com/ClangBuiltLinux/linux/issues/871 Link: https://lore.kernel.org/bpf/20200318222746.173648-1-maskray@google.com Signed-off-by: Maria Teguiani Tested-by: Matthias Maennich Signed-off-by: Greg Kroah-Hartman

kbuild: Remove debug info from kallsyms linking

2020-05-27T15:46:44+00:00

[ Upstream commit af73d78bd384aa9b8789aa6e7ddbb165f971276f ] When CONFIG_DEBUG_INFO is enabled, the two kallsyms linking steps spend time collecting and writing the dwarf sections to the temporary output files. kallsyms does not need this information, and leaving it off halves their linking time. This is especially noticeable without CONFIG_DEBUG_INFO_REDUCED. The BTF linking stage, however, does still need those details. Refactor the BTF and kallsyms generation stages slightly for more regularized temporary names. Skip debug during kallsyms links. Additionally move "info BTF" to the correct place since commit 8959e39272d6 ("kbuild: Parameterize kallsyms generation and correct reporting"), which added "info LD ..." to vmlinux_link calls. For a full debug info build with BTF, my link time goes from 1m06s to 0m54s, saving about 12 seconds, or 18%. Signed-off-by: Kees Cook Signed-off-by: Daniel Borkmann Acked-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/202003031814.4AEA3351@keescook Signed-off-by: Sasha Levin

scripts/gdb: repair rb_first() and rb_last()

2020-05-27T15:46:36+00:00

[ Upstream commit 50e36be1fb9572b2e4f2753340bdce3116bf2ce7 ] The current implementations of the rb_first() and rb_last() gdb functions have a variable that references itself in its instanciation, which causes the function to throw an error if a specific condition on the argument is met. The original author rather intended to reference the argument and made a typo. Referring the argument instead makes the function work as intended. Signed-off-by: Aymeric Agon-Rambosson Signed-off-by: Andrew Morton Reviewed-by: Stephen Boyd Cc: Jan Kiszka Cc: Kieran Bingham Cc: Douglas Anderson Cc: Nikolay Borisov Cc: Jackie Liu Cc: Jason Wessel Link: http://lkml.kernel.org/r/20200427051029.354840-1-aymeric.agon@yandex.com Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

gcc-common.h: Update for GCC 10

2020-05-27T15:46:24+00:00

[ Upstream commit c7527373fe28f97d8a196ab562db5589be0d34b9 ] Remove "params.h" include, which has been dropped in GCC 10. Remove is_a_helper() macro, which is now defined in gimple.h, as seen when running './scripts/gcc-plugin.sh g++ g++ gcc': In file included from :1: ./gcc-plugins/gcc-common.h:852:13: error: redefinition of ‘static bool is_a_helper::test(U*) [with U = const gimple; T = const ggoto*]’ 852 | inline bool is_a_helper::test(const_gimple gs) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from ./gcc-plugins/gcc-common.h:125, from :1: /usr/lib/gcc/x86_64-redhat-linux/10/plugin/include/gimple.h:1037:1: note: ‘static bool is_a_helper::test(U*) [with U = const gimple; T = const ggoto*]’ previously declared here 1037 | is_a_helper ::test (const gimple *gs) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ Add -Wno-format-diag to scripts/gcc-plugins/Makefile to avoid meaningless warnings from error() formats used by plugins: scripts/gcc-plugins/structleak_plugin.c: In function ‘int plugin_init(plugin_name_args*, plugin_gcc_version*)’: scripts/gcc-plugins/structleak_plugin.c:253:12: warning: unquoted sequence of 2 consecutive punctuation characters ‘'-’ in format [-Wformat-diag] 253 | error(G_("unknown option '-fplugin-arg-%s-%s'"), plugin_name, argv[i].key); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Frédéric Pierret (fepitre) Link: https://lore.kernel.org/r/20200407113259.270172-1-frederic.pierret@qubes-os.org [kees: include -Wno-format-diag for plugin builds] Signed-off-by: Kees Cook Signed-off-by: Sasha Levin

scripts/decodecode: fix trapping instruction formatting

2020-05-14T05:58:29+00:00

commit e08df079b23e2e982df15aa340bfbaf50f297504 upstream. If the trapping instruction contains a ':', for a memory access through segment registers for example, the sed substitution will insert the '*' marker in the middle of the instruction instead of the line address: 2b: 65 48 0f c7 0f cmpxchg16b %gs:*(%rdi) <-- trapping instruction I started to think I had forgotten some quirk of the assembly syntax before noticing that it was actually coming from the script. Fix it to add the address marker at the right place for these instructions: 28: 49 8b 06 mov (%r14),%rax 2b:* 65 48 0f c7 0f cmpxchg16b %gs:(%rdi) <-- trapping instruction 30: 0f 94 c0 sete %al Fixes: 18ff44b189e2 ("scripts/decodecode: make faulting insn ptr more robust") Signed-off-by: Ivan Delalande Signed-off-by: Andrew Morton Reviewed-by: Borislav Petkov Link: http://lkml.kernel.org/r/20200419223653.GA31248@visor Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

scripts/config: allow colons in option strings for sed

2020-05-10T08:31:27+00:00

[ Upstream commit e461bc9f9ab105637b86065d24b0b83f182d477c ] Sed broke on some strings as it used colon as a separator. I made it more robust by using \001, which is legit POSIX AFAIK. E.g. ./config --set-str CONFIG_USBNET_DEVADDR "de:ad:be:ef:00:01" failed with: sed: -e expression #1, char 55: unknown option to `s' Signed-off-by: Jeremie Francois (on alpha) Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin