kernel/linux.git/scripts, branch v5.10.46

scripts/clang-tools: switch explicitly to Python 3

2021-06-03T07:00:52+00:00

commit 074075aea2ff72dade5231b4ee9f2ab9a055f1ec upstream. For the same reason as commit 51839e29cb59 ("scripts: switch explicitly to Python 3"), switch some more scripts, which I tested and confirmed working on Python 3. Signed-off-by: Masahiro Yamada Acked-by: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman

scripts: switch explicitly to Python 3

2021-05-22T09:40:55+00:00

commit 51839e29cb5954470ea4db7236ef8c3d77a6e0bb upstream. Some distributions are about to switch to Python 3 support only. This means that /usr/bin/python, which is Python 2, is not available anymore. Hence, switch scripts to use Python 3 explicitly. Signed-off-by: Andy Shevchenko Signed-off-by: Masahiro Yamada Signed-off-by: Greg Kroah-Hartman

tweewide: Fix most Shebang lines

2021-05-22T09:40:55+00:00

commit c25ce589dca10d64dde139ae093abc258a32869c upstream. Change every shebang which does not need an argument to use /usr/bin/env. This is needed as not every distro has everything under /usr/bin, sometimes not even bash. Signed-off-by: Finn Behrens Signed-off-by: Masahiro Yamada Signed-off-by: Greg Kroah-Hartman

riscv: Workaround mcount name prior to clang-13

2021-05-22T09:40:53+00:00

[ Upstream commit 7ce04771503074a7de7f539cc43f5e1b385cb99b ] Prior to clang 13.0.0, the RISC-V name for the mcount symbol was "mcount", which differs from the GCC version of "_mcount", which results in the following errors: riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_level': main.c:(.text+0xe): undefined reference to `mcount' riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_start': main.c:(.text+0x4e): undefined reference to `mcount' riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_finish': main.c:(.text+0x92): undefined reference to `mcount' riscv64-linux-gnu-ld: init/main.o: in function `.LBB32_28': main.c:(.text+0x30c): undefined reference to `mcount' riscv64-linux-gnu-ld: init/main.o: in function `free_initmem': main.c:(.text+0x54c): undefined reference to `mcount' This has been corrected in https://reviews.llvm.org/D98881 but the minimum supported clang version is 10.0.1. To avoid build errors and to gain a working function tracer, adjust the name of the mcount symbol for older versions of clang in mount.S and recordmcount.pl. Link: https://github.com/ClangBuiltLinux/linux/issues/1331 Signed-off-by: Nathan Chancellor Reviewed-by: Nick Desaulniers Signed-off-by: Palmer Dabbelt Signed-off-by: Sasha Levin

scripts/recordmcount.pl: Fix RISC-V regex for clang

2021-05-22T09:40:53+00:00

[ Upstream commit 2f095504f4b9cf75856d6a9cf90299cf75aa46c5 ] Clang can generate R_RISCV_CALL_PLT relocations to _mcount: $ llvm-objdump -dr build/riscv/init/main.o | rg mcount 000000000000000e: R_RISCV_CALL_PLT _mcount 000000000000004e: R_RISCV_CALL_PLT _mcount After this, the __start_mcount_loc section is properly generated and function tracing still works. Link: https://github.com/ClangBuiltLinux/linux/issues/1331 Signed-off-by: Nathan Chancellor Reviewed-by: Fangrui Song Signed-off-by: Palmer Dabbelt Signed-off-by: Sasha Levin

kbuild: generate Module.symvers only when vmlinux exists

2021-05-19T08:12:59+00:00

[ Upstream commit 69bc8d386aebbd91a6bb44b6d33f77c8dfa9ed8c ] The external module build shows the following warning if Module.symvers is missing in the kernel tree. WARNING: Symbol version dump "Module.symvers" is missing. Modules may not have dependencies or modversions. I think this is an important heads-up because the resulting modules may not work as expected. This happens when you did not build the entire kernel tree, for example, you might have prepared the minimal setups for external modules by 'make defconfig && make modules_preapre'. A problem is that 'make modules' creates Module.symvers even without vmlinux. In this case, that warning is suppressed since Module.symvers already exists in spite of its incomplete content. The incomplete (i.e. invalid) Module.symvers should not be created. This commit changes the second pass of modpost to dump symbols into modules-only.symvers. The final Module.symvers is created by concatenating vmlinux.symvers and modules-only.symvers if both exist. Module.symvers is supposed to collect symbols from both vmlinux and modules. It might be a bit confusing, and I am not quite sure if it is an official interface, but presumably it is difficult to rename it because some tools (e.g. kmod) parse it. Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

kconfig: nconf: stop endless search loops

2021-05-19T08:12:56+00:00

[ Upstream commit 8c94b430b9f6213dec84e309bb480a71778c4213 ] If the user selects the very first entry in a page and performs a search-up operation, or selects the very last entry in a page and performs a search-down operation that will not succeed (e.g., via [/]asdfzzz[Up Arrow]), nconf will never terminate searching the page. The reason is that in this case, the starting point will be set to -1 or n, which is then translated into (n - 1) (i.e., the last entry of the page) or 0 (i.e., the first entry of the page) and finally the search begins. This continues to work fine until the index reaches 0 or (n - 1), at which point it will be decremented to -1 or incremented to n, but not checked against the starting point right away. Instead, it's wrapped around to the bottom or top again, after which the starting point check occurs... and naturally fails. My original implementation added another check for -1 before wrapping the running index variable around, but Masahiro Yamada pointed out that the actual issue is that the comparison point (starting point) exceeds bounds (i.e., the [0,n-1] interval) in the first place and that, instead, the starting point should be fixed. This has the welcome side-effect of also fixing the case where the starting point was n while searching down, which also lead to an infinite loop. OTOH, this code is now essentially all his work. Amazingly, nobody seems to have been hit by this for 11 years - or at the very least nobody bothered to debug and fix this. Signed-off-by: Mihai Moldovan Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

kasan: fix hwasan build for gcc

2021-04-28T11:40:02+00:00

[ Upstream commit 5c595ac4c776c44b5c59de22ab43b3fe256d9fbb ] gcc-11 adds support for -fsanitize=kernel-hwaddress, so it becomes possible to enable CONFIG_KASAN_SW_TAGS. Unfortunately this fails to build at the moment, because the corresponding command line arguments use llvm specific syntax. Change it to use the cc-param macro instead, which works on both clang and gcc. [elver@google.com: fixup for "kasan: fix hwasan build for gcc"] Link: https://lkml.kernel.org/r/YHQZVfVVLE/LDK2v@elver.google.com Link: https://lkml.kernel.org/r/20210323124112.1229772-1-arnd@kernel.org Signed-off-by: Arnd Bergmann Signed-off-by: Marco Elver Reviewed-by: Marco Elver Acked-by: Andrey Konovalov Cc: Masahiro Yamada Cc: Michal Marek Cc: Andrey Ryabinin Cc: Nathan Chancellor Cc: Nick Desaulniers Cc: Alexander Potapenko Cc: Dmitry Vyukov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

kbuild: dummy-tools: fix inverted tests for gcc

2021-03-30T12:31:50+00:00

[ Upstream commit b3d9fc1436808a4ef9927e558b3415e728e710c5 ] There is a test in Kconfig which takes inverted value of a compiler check: * config CC_HAS_INT128 def_bool !$(cc-option,$(m64-flag) -D__SIZEOF_INT128__=0) This results in CC_HAS_INT128 not being in super-config generated by dummy-tools. So take this into account in the gcc script. Signed-off-by: Jiri Slaby Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

ftrace: Have recordmcount use w8 to read relp->r_info in arm64_is_fake_mcount

2021-03-09T10:11:14+00:00

[ Upstream commit 999340d51174ce4141dd723105d4cef872b13ee9 ] On little endian system, Use aarch64_be(gcc v7.3) downloaded from linaro.org to build image with CONFIG_CPU_BIG_ENDIAN = y, CONFIG_FTRACE = y, CONFIG_DYNAMIC_FTRACE = y. gcc will create symbols of _mcount but recordmcount can not create mcount_loc for *.o. aarch64_be-linux-gnu-objdump -r fs/namei.o | grep mcount 00000000000000d0 R_AARCH64_CALL26 _mcount ... 0000000000007190 R_AARCH64_CALL26 _mcount The reason is than funciton arm64_is_fake_mcount can not work correctly. A symbol of _mcount in *.o compiled with big endian compiler likes: 00 00 00 2d 00 00 01 1b w(rp->r_info) will return 0x2d instead of 0x011b. Because w() takes uint32_t as parameter, which truncates rp->r_info. Use w8() instead w() to read relp->r_info Link: https://lkml.kernel.org/r/20210222135840.56250-1-chenjun102@huawei.com Fixes: ea0eada45632 ("recordmcount: only record relocation of type R_AARCH64_CALL26 on arm64.") Acked-by: Will Deacon Signed-off-by: Chen Jun Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Sasha Levin