kernel/linux.git/scripts/mod, branch v5.15.172

modpost: trim leading spaces when processing source files list

2024-02-23T07:55:04+00:00

[ Upstream commit 5d9a16b2a4d9e8fa028892ded43f6501bc2969e5 ] get_line() does not trim the leading spaces, but the parse_source_files() expects to get lines with source files paths where the first space occurs after the file path. Fixes: 70f30cfe5b89 ("modpost: use read_text_file() and get_line() for reading text files") Signed-off-by: Radek Krejci Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

modpost: fix tee MODULE_DEVICE_TABLE built on big-endian host

2023-11-20T10:08:26+00:00

[ Upstream commit 7f54e00e5842663c2cea501bbbdfa572c94348a3 ] When MODULE_DEVICE_TABLE(tee, ) is built on a host with a different endianness from the target architecture, it results in an incorrect MODULE_ALIAS(). For example, see a case where drivers/char/hw_random/optee-rng.c is built as a module for ARM little-endian. If you build it on a little-endian host, you will get the correct MODULE_ALIAS: $ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c MODULE_ALIAS("tee:ab7a617c-b8e7-4d8f-8301-d09b61036b64*"); However, if you build it on a big-endian host, you will get a wrong MODULE_ALIAS: $ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c MODULE_ALIAS("tee:646b0361-9bd0-0183-8f4d-e7b87c617aab*"); The same problem also occurs when you enable CONFIG_CPU_BIG_ENDIAN, and build it on a little-endian host. This issue has been unnoticed because the ARM kernel is configured for little-endian by default, and most likely built on a little-endian host (cross-build on x86 or native-build on ARM). The uuid field must not be reversed because uuid_t is an array of __u8. Fixes: 0fc1db9d1059 ("tee: add bus driver framework for TEE based devices") Signed-off-by: Masahiro Yamada Reviewed-by: Sumit Garg Signed-off-by: Sasha Levin

modpost: add missing else to the "of" check

2023-10-10T19:59:07+00:00

[ Upstream commit cbc3d00cf88fda95dbcafee3b38655b7a8f2650a ] Without this 'else' statement, an "usb" name goes into two handlers: the first/previous 'if' statement _AND_ the for-loop over 'devtable', but the latter is useless as it has no 'usb' device_id entry anyway. Tested with allmodconfig before/after patch; no changes to *.mod.c: git checkout v6.6-rc3 make -j$(nproc) allmodconfig make -j$(nproc) olddefconfig make -j$(nproc) find . -name '*.mod.c' | cpio -pd /tmp/before # apply patch make -j$(nproc) find . -name '*.mod.c' | cpio -pd /tmp/after diff -r /tmp/before/ /tmp/after/ # no difference Fixes: acbef7b76629 ("modpost: fix module autoloading for OF devices with generic compatible property") Signed-off-by: Mauricio Faria de Oliveira Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

modpost: fix off by one in is_executable_section()

2023-07-23T11:47:15+00:00

[ Upstream commit 3a3f1e573a105328a2cca45a7cfbebabbf5e3192 ] The > comparison should be >= to prevent an out of bounds array access. Fixes: 52dc0595d540 ("modpost: handle relocations mismatch in __ex_table.") Signed-off-by: Dan Carpenter Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

modpost: fix section mismatch message for R_ARM_{PC24,CALL,JUMP24}

2023-07-23T11:47:15+00:00

[ Upstream commit 56a24b8ce6a7f9c4a21b2276a8644f6f3d8fc14d ] addend_arm_rel() processes R_ARM_PC24, R_ARM_CALL, R_ARM_JUMP24 in a wrong way. Here, test code. [test code for R_ARM_JUMP24] .section .init.text,"ax" bar: bx lr .section .text,"ax" .globl foo foo: b bar [test code for R_ARM_CALL] .section .init.text,"ax" bar: bx lr .section .text,"ax" .globl foo foo: push {lr} bl bar pop {pc} If you compile it with ARM multi_v7_defconfig, modpost will show the symbol name, (unknown). WARNING: modpost: vmlinux.o: section mismatch in reference: foo (section: .text) -> (unknown) (section: .init.text) (You need to use GNU linker instead of LLD to reproduce it.) Fix the code to make modpost show the correct symbol name. I imported (with adjustment) sign_extend32() from include/linux/bitops.h. The '+8' is the compensation for pc-relative instruction. It is documented in "ELF for the Arm Architecture" [1]. "If the relocation is pc-relative then compensation for the PC bias (the PC value is 8 bytes ahead of the executing instruction in Arm state and 4 bytes in Thumb state) must be encoded in the relocation by the object producer." [1]: https://github.com/ARM-software/abi-aa/blob/main/aaelf32/aaelf32.rst Fixes: 56a974fa2d59 ("kbuild: make better section mismatch reports on arm") Fixes: 6e2e340b59d2 ("ARM: 7324/1: modpost: Fix section warnings for ARM for many compilers") Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

modpost: fix section mismatch message for R_ARM_ABS32

2023-07-23T11:47:15+00:00

[ Upstream commit b7c63520f6703a25eebb4f8138fed764fcae1c6f ] addend_arm_rel() processes R_ARM_ABS32 in a wrong way. Here, test code. [test code 1] #include int __initdata foo; int get_foo(void) { return foo; } If you compile it with ARM versatile_defconfig, modpost will show the symbol name, (unknown). WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> (unknown) (section: .init.data) (You need to use GNU linker instead of LLD to reproduce it.) If you compile it for other architectures, modpost will show the correct symbol name. WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> foo (section: .init.data) For R_ARM_ABS32, addend_arm_rel() sets r->r_addend to a wrong value. I just mimicked the code in arch/arm/kernel/module.c. However, there is more difficulty for ARM. Here, test code. [test code 2] #include int __initdata foo; int get_foo(void) { return foo; } int __initdata bar; int get_bar(void) { return bar; } With this commit applied, modpost will show the following messages for ARM versatile_defconfig: WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> foo (section: .init.data) WARNING: modpost: vmlinux.o: section mismatch in reference: get_bar (section: .text) -> foo (section: .init.data) The reference from 'get_bar' to 'foo' seems wrong. I have no solution for this because it is true in assembly level. In the following output, relocation at 0x1c is no longer associated with 'bar'. The two relocation entries point to the same symbol, and the offset to 'bar' is encoded in the instruction 'r0, [r3, #4]'. Disassembly of section .text: 00000000 : 0: e59f3004 ldr r3, [pc, #4] @ c 4: e5930000 ldr r0, [r3] 8: e12fff1e bx lr c: 00000000 .word 0x00000000 00000010 : 10: e59f3004 ldr r3, [pc, #4] @ 1c 14: e5930004 ldr r0, [r3, #4] 18: e12fff1e bx lr 1c: 00000000 .word 0x00000000 Relocation section '.rel.text' at offset 0x244 contains 2 entries: Offset Info Type Sym.Value Sym. Name 0000000c 00000c02 R_ARM_ABS32 00000000 .init.data 0000001c 00000c02 R_ARM_ABS32 00000000 .init.data When find_elf_symbol() gets into a situation where relsym->st_name is zero, there is no guarantee to get the symbol name as written in C. I am keeping the current logic because it is useful in many architectures, but the symbol name is not always correct depending on the optimization. I left some comments in find_tosym(). Fixes: 56a974fa2d59 ("kbuild: make better section mismatch reports on arm") Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

modpost: remove broken calculation of exception_table_entry size

2023-07-23T11:47:14+00:00

[ Upstream commit d0acc76a49aa917c1a455d11d32d34a01e8b2835 ] find_extable_entry_size() is completely broken. It has awesome comments about how to calculate sizeof(struct exception_table_entry). It was based on these assumptions: - struct exception_table_entry has two fields - both of the fields have the same size Then, we came up with this equation: (offset of the second field) * 2 == (size of struct) It was true for all architectures when commit 52dc0595d540 ("modpost: handle relocations mismatch in __ex_table.") was applied. Our mathematics broke when commit 548acf19234d ("x86/mm: Expand the exception table logic to allow new handling options") introduced the third field. Now, the definition of exception_table_entry is highly arch-dependent. For x86, sizeof(struct exception_table_entry) is apparently 12, but find_extable_entry_size() sets extable_entry_size to 8. I could fix it, but I do not see much value in this code. extable_entry_size is used just for selecting a slightly different error message. If the first field ("insn") references to a non-executable section, The relocation at %s+0x%lx references section "%s" which is not executable, IOW it is not possible for the kernel to fault at that address. Something is seriously wrong and should be fixed. If the second field ("fixup") references to a non-executable section, The relocation at %s+0x%lx references section "%s" which is not executable, IOW the kernel will fault if it ever tries to jump to it. Something is seriously wrong and should be fixed. Merge the two error messages rather than adding even more complexity. Change fatal() to error() to make it continue running and catch more possible errors. Fixes: 548acf19234d ("x86/mm: Expand the exception table logic to allow new handling options") Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin

modpost: fix section mismatch check for exported init/exit sections

2022-06-29T07:03:31+00:00

commit 28438794aba47a27e922857d27b31b74e8559143 upstream. Since commit f02e8a6596b7 ("module: Sort exported symbols"), EXPORT_SYMBOL* is placed in the individual section ___ksymtab(_gpl)+ (3 leading underscores instead of 2). Since then, modpost cannot detect the bad combination of EXPORT_SYMBOL and __init/__exit. Fix the .fromsec field. Fixes: f02e8a6596b7 ("module: Sort exported symbols") Signed-off-by: Masahiro Yamada Reviewed-by: Nick Desaulniers Signed-off-by: Greg Kroah-Hartman

modpost: fix undefined behavior of is_arm_mapping_symbol()

2022-06-14T16:36:23+00:00

[ Upstream commit d6b732666a1bae0df3c3ae06925043bba34502b1 ] The return value of is_arm_mapping_symbol() is unpredictable when "$" is passed in. strchr(3) says: The strchr() and strrchr() functions return a pointer to the matched character or NULL if the character is not found. The terminating null byte is considered part of the string, so that if c is specified as '\0', these functions return a pointer to the terminator. When str[1] is '\0', strchr("axtd", str[1]) is not NULL, and str[2] is referenced (i.e. buffer overrun). Test code --------- char str1[] = "abc"; char str2[] = "ab"; strcpy(str1, "$"); strcpy(str2, "$"); printf("test1: %d\n", is_arm_mapping_symbol(str1)); printf("test2: %d\n", is_arm_mapping_symbol(str2)); Result ------ test1: 0 test2: 1 Signed-off-by: Masahiro Yamada Reviewed-by: Nick Desaulniers Signed-off-by: Sasha Levin

modpost: fix removing numeric suffixes

2022-06-14T16:36:10+00:00

[ Upstream commit b5beffa20d83c4e15306c991ffd00de0d8628338 ] With the `-z unique-symbol` linker flag or any similar mechanism, it is possible to trigger the following: ERROR: modpost: "param_set_uint.0" [vmlinux] is a static EXPORT_SYMBOL The reason is that for now the condition from remove_dot(): if (m && (s[n + m] == '.' || s[n + m] == 0)) which was designed to test if it's a dot or a '\0' after the suffix is never satisfied. This is due to that `s[n + m]` always points to the last digit of a numeric suffix, not on the symbol next to it (from a custom debug print added to modpost): param_set_uint.0, s[n + m] is '0', s[n + m + 1] is '\0' So it's off-by-one and was like that since 2014. Fix this for the sake of any potential upcoming features, but don't bother stable-backporting, as it's well hidden -- apart from that LD flag, it can be triggered only with GCC LTO which never landed upstream. Fixes: fcd38ed0ff26 ("scripts: modpost: fix compilation warning") Signed-off-by: Alexander Lobakin Reviewed-by: Petr Mladek Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin