Linux kernel stable tree (mirror) https://git.radix-linux.su/kernel/linux.git/atom?h=v6.19.11 2025-12-31T07:19:25+00:00 2025-12-31T07:19:25+00:00 Chenghao Duan duanchenghao@kylinos.cn 2025-12-31T07:19:25+00:00 urn:sha1:bb85d206be208bbf834883e948125a35ac59993a Ensure that in the ftrace direct call logic, the CPU register state (with ra = parent return address) is restored to the correct state after the execution of the custom trampoline function and before returning to the traced function. Additionally, guarantee the correctness of the jump logic for jr t0 (traced function address). Cc: stable@vger.kernel.org Fixes: 9cdc3b6a299c ("LoongArch: ftrace: Add direct call support") Reported-by: Youling Tang <tangyouling@kylinos.cn> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 2025-12-17T17:10:58+00:00 Marko Turk mt@markoturk.info 2025-12-10T11:25:51+00:00 urn:sha1:e2f1081ca8f18c146e8f928486deac61eca2b517 MMIO backend of PCI Bar always assumes little-endian devices and will convert to CPU endianness automatically. Remove the u32::from_le conversion which would cause a bug on big-endian machines. Cc: stable@vger.kernel.org Reviewed-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Marko Turk <mt@markoturk.info> Fixes: 685376d18e9a ("samples: rust: add Rust PCI sample driver") Link: https://patch.msgid.link/20251210112503.62925-2-mt@markoturk.info Signed-off-by: Danilo Krummrich <dakr@kernel.org> 2025-12-07T02:42:12+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-12-07T02:42:12+00:00 urn:sha1:f5e9d31e79c1ce8ba948ecac74d75e9c8d2f0c87 Pull USB/Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver updates for 6.19-rc1. Nothing major here, just lots of tiny updates for most of the common USB drivers. Included in here are: - more xhci driver updates and fixes - Thunderbolt driver cleanups - usb serial driver updates - typec driver updates - USB tracepoint additions - dwc3 driver updates, including support for Apple hardware - lots of other smaller driver updates and cleanups All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits) usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt USB: serial: option: move Telit 0x10c7 composition in the right place USB: serial: option: add Telit Cinterion FE910C04 new compositions usb: typec: ucsi: fix use-after-free caused by uec->work usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe() usb: dwc3: core: Remove redundant comment in core init usb: phy: Initialize struct usb_phy list_head USB: serial: option: add Foxconn T99W760 usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive. usb: typec: hd3ss3220: Enable VBUS based on ID pin state dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users USB: add WQ_PERCPU to alloc_workqueue users dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform drivers/usb/storage: use min() instead of min_t() usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE usb: ohci-da8xx: remove unused platform data usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper usb: uas: reduce time under spinlock usb: dwc3: eic7700: Add EIC7700 USB driver ... 2025-12-06T22:01:20+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-12-06T22:01:20+00:00 urn:sha1:509d3f45847627f4c5cdce004c3ec79262b5239c Pull non-MM updates from Andrew Morton: - "panic: sys_info: Refactor and fix a potential issue" (Andy Shevchenko) fixes a build issue and does some cleanup in ib/sys_info.c - "Implement mul_u64_u64_div_u64_roundup()" (David Laight) enhances the 64-bit math code on behalf of a PWM driver and beefs up the test module for these library functions - "scripts/gdb/symbols: make BPF debug info available to GDB" (Ilya Leoshkevich) makes BPF symbol names, sizes, and line numbers available to the GDB debugger - "Enable hung_task and lockup cases to dump system info on demand" (Feng Tang) adds a sysctl which can be used to cause additional info dumping when the hung-task and lockup detectors fire - "lib/base64: add generic encoder/decoder, migrate users" (Kuan-Wei Chiu) adds a general base64 encoder/decoder to lib/ and migrates several users away from their private implementations - "rbree: inline rb_first() and rb_last()" (Eric Dumazet) makes TCP a little faster - "liveupdate: Rework KHO for in-kernel users" (Pasha Tatashin) reworks the KEXEC Handover interfaces in preparation for Live Update Orchestrator (LUO), and possibly for other future clients - "kho: simplify state machine and enable dynamic updates" (Pasha Tatashin) increases the flexibility of KEXEC Handover. Also preparation for LUO - "Live Update Orchestrator" (Pasha Tatashin) is a major new feature targeted at cloud environments. Quoting the cover letter: This series introduces the Live Update Orchestrator, a kernel subsystem designed to facilitate live kernel updates using a kexec-based reboot. This capability is critical for cloud environments, allowing hypervisors to be updated with minimal downtime for running virtual machines. LUO achieves this by preserving the state of selected resources, such as memory, devices and their dependencies, across the kernel transition. As a key feature, this series includes support for preserving memfd file descriptors, which allows critical in-memory data, such as guest RAM or any other large memory region, to be maintained in RAM across the kexec reboot. Mike Rappaport merits a mention here, for his extensive review and testing work. - "kexec: reorganize kexec and kdump sysfs" (Sourabh Jain) moves the kexec and kdump sysfs entries from /sys/kernel/ to /sys/kernel/kexec/ and adds back-compatibility symlinks which can hopefully be removed one day - "kho: fixes for vmalloc restoration" (Mike Rapoport) fixes a BUG which was being hit during KHO restoration of vmalloc() regions * tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (139 commits) calibrate: update header inclusion Reinstate "resource: avoid unnecessary lookups in find_next_iomem_res()" vmcoreinfo: track and log recoverable hardware errors kho: fix restoring of contiguous ranges of order-0 pages kho: kho_restore_vmalloc: fix initialization of pages array MAINTAINERS: TPM DEVICE DRIVER: update the W-tag init: replace simple_strtoul with kstrtoul to improve lpj_setup KHO: fix boot failure due to kmemleak access to non-PRESENT pages Documentation/ABI: new kexec and kdump sysfs interface Documentation/ABI: mark old kexec sysfs deprecated kexec: move sysfs entries to /sys/kernel/kexec test_kho: always print restore status kho: free chunks using free_page() instead of kfree() selftests/liveupdate: add kexec test for multiple and empty sessions selftests/liveupdate: add simple kexec-based selftest for LUO selftests/liveupdate: add userspace API selftests docs: add documentation for memfd preservation via LUO mm: memfd_luo: allow preserving memfd liveupdate: luo_file: add private argument to store runtime state mm: shmem: export some functions to internal.h ... 2025-12-06T16:27:07+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-12-06T16:27:07+00:00 urn:sha1:c84d574698bad2c02aad506dfe712f83cbe3b771 Pull module updates from Daniel Gomez: "Rust module parameter support: - Add Rust module parameter support, enabling Rust kernel modules to declare and use module parameters. The rust_minimal sample module demonstrates this, and the rust null block driver will be the first to use it in the next cycle. This also adds the Rust module files under the modules subsystem as agreed between the Rust and modules maintainers. Hardening: - Add compile-time check for embedded NUL characters in MODULE_*() macros. This module metadata was once used (and maybe still) to bypass license enforcement (LWN article from 2003): https://lwn.net/Articles/82305/ [1] MAINTAINERS: - Add Aaron Tomlin as reviewer for the Modules subsystem" * tag 'modules-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: MAINTAINERS: Add myself as reviewer for module support module: Add compile-time check for embedded NUL characters media: radio: si470x: Fix DRIVER_AUTHOR macro definition media: dvb-usb-v2: lmedm04: Fix firmware macro definitions modules: add rust modules files to MAINTAINERS rust: samples: add a module parameter to the rust_minimal sample rust: module: update the module macro with module parameter support rust: module: use a reference in macros::module::module rust: introduce module_param module rust: str: add radix prefixed integer parsing functions rust: sync: add `SetOnce` 2025-12-06T05:29:02+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-12-06T05:29:02+00:00 urn:sha1:416f99c3b16f582a3fc6d64a1f77f39d94b76de5 Pull driver core updates from Danilo Krummrich: "Arch Topology: - Move parse_acpi_topology() from arm64 to common code for reuse in RISC-V CPU: - Expose housekeeping CPUs through /sys/devices/system/cpu/housekeeping - Print a newline (or 0x0A) instead of '(null)' reading /sys/devices/system/cpu/nohz_full when nohz_full= is not set debugfs - Remove (broken) 'no-mount' mode - Remove redundant access mode checks in debugfs_get_tree() and debugfs_create_*() functions Devres: - Remove unused devm_free_percpu() helper - Move devm_alloc_percpu() from device.h to devres.h Firmware Loader: - Replace simple_strtol() with kstrtoint() - Do not call cancel_store() when no upload is in progress kernfs: - Increase struct super_block::maxbytes to MAX_LFS_FILESIZE - Fix a missing unwind path in __kernfs_new_node() Misc: - Increase the name size in struct auxiliary_device_id to 40 characters - Replace system_unbound_wq with system_dfl_wq and add WQ_PERCPU to alloc_workqueue() Platform: - Replace ERR_PTR() with IOMEM_ERR_PTR() in platform ioremap functions Rust: - Auxiliary: - Unregister auxiliary device on parent device unbind - Move parent() to impl Device; implement device context aware parent() for Device<Bound> - Illustrate how to safely obtain a driver's device private data when calling from an auxiliary driver into the parant device driver - DebugFs: - Implement support for binary large objects - Device: - Let probe() return the driver's device private data as pinned initializer, i.e. impl PinInit<Self, Error> - Implement safe accessor for a driver's device private data for Device<Bound> (returned reference can't out-live driver binding and guarantees the correct private data type) - Implement AsBusDevice trait, to be used by class device abstractions to derive the bus device type of the parent device - DMA: - Store raw pointer of allocation as NonNull - Use start_ptr() and start_ptr_mut() to inherit correct mutability of self - FS: - Add file::Offset type alias - I2C: - Add abstractions for I2C device / driver infrastructure - Implement abstractions for manual I2C device registrations - I/O: - Use "kernel vertical" style for imports - Define ResourceSize as resource_size_t - Move ResourceSize to top-level I/O module - Add type alias for phys_addr_t - Implement Rust version of read_poll_timeout_atomic() - PCI: - Use "kernel vertical" style for imports - Move I/O and IRQ infrastructure to separate files - Add support for PCI interrupt vectors - Implement TryInto<IrqRequest<'a>> for IrqVector<'a> to convert an IrqVector bound to specific pci::Device into an IrqRequest bound to the same pci::Device's parent Device - Leverage pin_init_scope() to get rid of redundant Result in IRQ methods - PinInit: - Add {pin_}init_scope() to execute code before creating an initializer - Platform: - Leverage pin_init_scope() to get rid of redundant Result in IRQ methods - Timekeeping: - Implement abstraction of udelay() - Uaccess: - Implement read_slice_partial() and read_slice_file() for UserSliceReader - Implement write_slice_partial() and write_slice_file() for UserSliceWriter sysfs: - Prepare the constification of struct attribute" * tag 'driver-core-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (75 commits) rust: pci: fix build failure when CONFIG_PCI_MSI is disabled debugfs: Fix default access mode config check debugfs: Remove broken no-mount mode debugfs: Remove redundant access mode checks driver core: Check drivers_autoprobe for all added devices driver core: WQ_PERCPU added to alloc_workqueue users driver core: replace use of system_unbound_wq with system_dfl_wq tick/nohz: Expose housekeeping CPUs in sysfs tick/nohz: avoid showing '(null)' if nohz_full= not set sysfs/cpu: Use DEVICE_ATTR_RO for nohz_full attribute kernfs: fix memory leak of kernfs_iattrs in __kernfs_new_node fs/kernfs: raise sb->maxbytes to MAX_LFS_FILESIZE mod_devicetable: Bump auxiliary_device_id name size sysfs: simplify attribute definition macros samples/kobject: constify 'struct foo_attribute' samples/kobject: add is_visible() callback to attribute group sysfs: attribute_group: enable const variants of is_visible() sysfs: introduce __SYSFS_FUNCTION_ALTERNATIVE() sysfs: transparently handle const pointers in ATTRIBUTE_GROUPS() sysfs: attribute_group: allow registration of const attribute ... 2025-12-05T02:42:48+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-12-05T02:42:48+00:00 urn:sha1:a3ebb59eee2e558e8f8f27fc3f75cd367f17cd8e Pull VFIO updates from Alex Williamson: - Move libvfio selftest artifacts in preparation of more tightly coupled integration with KVM selftests (David Matlack) - Fix comment typo in mtty driver (Chu Guangqing) - Support for new hardware revision in the hisi_acc vfio-pci variant driver where the migration registers can now be accessed via the PF. When enabled for this support, the full BAR can be exposed to the user (Longfang Liu) - Fix vfio cdev support for VF token passing, using the correct size for the kernel structure, thereby actually allowing userspace to provide a non-zero UUID token. Also set the match token callback for the hisi_acc, fixing VF token support for this this vfio-pci variant driver (Raghavendra Rao Ananta) - Introduce internal callbacks on vfio devices to simplify and consolidate duplicate code for generating VFIO_DEVICE_GET_REGION_INFO data, removing various ioctl intercepts with a more structured solution (Jason Gunthorpe) - Introduce dma-buf support for vfio-pci devices, allowing MMIO regions to be exposed through dma-buf objects with lifecycle managed through move operations. This enables low-level interactions such as a vfio-pci based SPDK drivers interacting directly with dma-buf capable RDMA devices to enable peer-to-peer operations. IOMMUFD is also now able to build upon this support to fill a long standing feature gap versus the legacy vfio type1 IOMMU backend with an implementation of P2P support for VM use cases that better manages the lifecycle of the P2P mapping (Leon Romanovsky, Jason Gunthorpe, Vivek Kasireddy) - Convert eventfd triggering for error and request signals to use RCU mechanisms in order to avoid a 3-way lockdep reported deadlock issue (Alex Williamson) - Fix a 32-bit overflow introduced via dma-buf support manifesting with large DMA buffers (Alex Mastro) - Convert nvgrace-gpu vfio-pci variant driver to insert mappings on fault rather than at mmap time. This conversion serves both to make use of huge PFNMAPs but also to both avoid corrected RAS events during reset by now being subject to vfio-pci-core's use of unmap_mapping_range(), and to enable a device readiness test after reset (Ankit Agrawal) - Refactoring of vfio selftests to support multi-device tests and split code to provide better separation between IOMMU and device objects. This work also enables a new test suite addition to measure parallel device initialization latency (David Matlack) * tag 'vfio-v6.19-rc1' of https://github.com/awilliam/linux-vfio: (65 commits) vfio: selftests: Add vfio_pci_device_init_perf_test vfio: selftests: Eliminate INVALID_IOVA vfio: selftests: Split libvfio.h into separate header files vfio: selftests: Move vfio_selftests_*() helpers into libvfio.c vfio: selftests: Rename vfio_util.h to libvfio.h vfio: selftests: Stop passing device for IOMMU operations vfio: selftests: Move IOVA allocator into iova_allocator.c vfio: selftests: Move IOMMU library code into iommu.c vfio: selftests: Rename struct vfio_dma_region to dma_region vfio: selftests: Upgrade driver logging to dev_err() vfio: selftests: Prefix logs with device BDF where relevant vfio: selftests: Eliminate overly chatty logging vfio: selftests: Support multiple devices in the same container/iommufd vfio: selftests: Introduce struct iommu vfio: selftests: Rename struct vfio_iommu_mode to iommu_mode vfio: selftests: Allow passing multiple BDFs on the command line vfio: selftests: Split run.sh into separate scripts vfio: selftests: Move run.sh into scripts directory vfio/nvgrace-gpu: wait for the GPU mem to be ready vfio/nvgrace-gpu: Inform devmem unmapped after reset ... 2025-12-04T01:24:33+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-12-04T01:24:33+00:00 urn:sha1:8f7aa3d3c7323f4ca2768a9e74ebbe359c4f8f88 Pull networking updates from Jakub Kicinski: "Core & protocols: - Replace busylock at the Tx queuing layer with a lockless list. Resulting in a 300% (4x) improvement on heavy TX workloads, sending twice the number of packets per second, for half the cpu cycles. - Allow constantly busy flows to migrate to a more suitable CPU/NIC queue. Normally we perform queue re-selection when flow comes out of idle, but under extreme circumstances the flows may be constantly busy. Add sysctl to allow periodic rehashing even if it'd risk packet reordering. - Optimize the NAPI skb cache, make it larger, use it in more paths. - Attempt returning Tx skbs to the originating CPU (like we already did for Rx skbs). - Various data structure layout and prefetch optimizations from Eric. - Remove ktime_get() from the recvmsg() fast path, ktime_get() is sadly quite expensive on recent AMD machines. - Extend threaded NAPI polling to allow the kthread busy poll for packets. - Make MPTCP use Rx backlog processing. This lowers the lock pressure, improving the Rx performance. - Support memcg accounting of MPTCP socket memory. - Allow admin to opt sockets out of global protocol memory accounting (using a sysctl or BPF-based policy). The global limits are a poor fit for modern container workloads, where limits are imposed using cgroups. - Improve heuristics for when to kick off AF_UNIX garbage collection. - Allow users to control TCP SACK compression, and default to 33% of RTT. - Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid unnecessarily aggressive rcvbuf growth and overshot when the connection RTT is low. - Preserve skb metadata space across skb_push / skb_pull operations. - Support for IPIP encapsulation in the nftables flowtable offload. - Support appending IP interface information to ICMP messages (RFC 5837). - Support setting max record size in TLS (RFC 8449). - Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL. - Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock. - Let users configure the number of write buffers in SMC. - Add new struct sockaddr_unsized for sockaddr of unknown length, from Kees. - Some conversions away from the crypto_ahash API, from Eric Biggers. - Some preparations for slimming down struct page. - YAML Netlink protocol spec for WireGuard. - Add a tool on top of YAML Netlink specs/lib for reporting commonly computed derived statistics and summarized system state. Driver API: - Add CAN XL support to the CAN Netlink interface. - Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as defined by the OPEN Alliance's "Advanced diagnostic features for 100BASE-T1 automotive Ethernet PHYs" specification. - Add DPLL phase-adjust-gran pin attribute (and implement it in zl3073x). - Refactor xfrm_input lock to reduce contention when NIC offloads IPsec and performs RSS. - Add info to devlink params whether the current setting is the default or a user override. Allow resetting back to default. - Add standard device stats for PSP crypto offload. - Leverage DSA frame broadcast to implement simple HSR frame duplication for a lot of switches without dedicated HSR offload. - Add uAPI defines for 1.6Tbps link modes. Device drivers: - Add Motorcomm YT921x gigabit Ethernet switch support. - Add MUCSE driver for N500/N210 1GbE NIC series. - Convert drivers to support dedicated ops for timestamping control, and away from the direct IOCTL handling. While at it support GET operations for PHY timestamping. - Add (and convert most drivers to) a dedicated ethtool callback for reading the Rx ring count. - Significant refactoring efforts in the STMMAC driver, which supports Synopsys turn-key MAC IP integrated into a ton of SoCs. - Ethernet high-speed NICs: - Broadcom (bnxt): - support PPS in/out on all pins - Intel (100G, ice, idpf): - ice: implement standard ethtool and timestamping stats - i40e: support setting the max number of MAC addresses per VF - iavf: support RSS of GTP tunnels for 5G and LTE deployments - nVidia/Mellanox (mlx5): - reduce downtime on interface reconfiguration - disable being an XDP redirect target by default (same as other drivers) to avoid wasting resources if feature is unused - Meta (fbnic): - add support for Linux-managed PCS on 25G, 50G, and 100G links - Wangxun: - support Rx descriptor merge, and Tx head writeback - support Rx coalescing offload - support 25G SPF and 40G QSFP modules - Ethernet virtual: - Google (gve): - allow ethtool to configure rx_buf_len - implement XDP HW RX Timestamping support for DQ descriptor format - Microsoft vNIC (mana): - support HW link state events - handle hardware recovery events when probing the device - Ethernet NICs consumer, and embedded: - usbnet: add support for Byte Queue Limits (BQL) - AMD (amd-xgbe): - add device selftests - NXP (enetc): - add i.MX94 support - Broadcom integrated MACs (bcmgenet, bcmasp): - bcmasp: add support for PHY-based Wake-on-LAN - Broadcom switches (b53): - support port isolation - support BCM5389/97/98 and BCM63XX ARL formats - Lantiq/MaxLinear switches: - support bridge FDB entries on the CPU port - use regmap for register access - allow user to enable/disable learning - support Energy Efficient Ethernet - support configuring RMII clock delays - add tagging driver for MaxLinear GSW1xx switches - Synopsys (stmmac): - support using the HW clock in free running mode - add Eswin EIC7700 support - add Rockchip RK3506 support - add Altera Agilex5 support - Cadence (macb): - cleanup and consolidate descriptor and DMA address handling - add EyeQ5 support - TI: - icssg-prueth: support AF_XDP - Airoha access points: - add missing Ethernet stats and link state callback - add AN7583 support - support out-of-order Tx completion processing - Power over Ethernet: - pd692x0: preserve PSE configuration across reboots - add support for TPS23881B devices - Ethernet PHYs: - Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support - Support 50G SerDes and 100G interfaces in Linux-managed PHYs - micrel: - support for non PTP SKUs of lan8814 - enable in-band auto-negotiation on lan8814 - realtek: - cable testing support on RTL8224 - interrupt support on RTL8221B - motorcomm: support for PHY LEDs on YT853 - microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag - mscc: support for PHY LED control - CAN drivers: - m_can: add support for optional reset and system wake up - remove can_change_mtu() obsoleted by core handling - mcp251xfd: support GPIO controller functionality - Bluetooth: - add initial support for PASTa - WiFi: - split ieee80211.h file, it's way too big - improvements in VHT radiotap reporting, S1G, Channel Switch Announcement handling, rate tracking in mesh networks - improve multi-radio monitor mode support, and add a cfg80211 debugfs interface for it - HT action frame handling on 6 GHz - initial chanctx work towards NAN - MU-MIMO sniffer improvements - WiFi drivers: - RealTek (rtw89): - support USB devices RTL8852AU and RTL8852CU - initial work for RTL8922DE - improved injection support - Intel: - iwlwifi: new sniffer API support - MediaTek (mt76): - WED support for >32-bit DMA - airoha NPU support - regdomain improvements - continued WiFi7/MLO work - Qualcomm/Atheros: - ath10k: factory test support - ath11k: TX power insertion support - ath12k: BSS color change support - ath12k: statistics improvements - brcmfmac: Acer A1 840 tablet quirk - rtl8xxxu: 40 MHz connection fixes/support" * tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits) net: page_pool: sanitise allocation order net: page pool: xa init with destroy on pp init net/mlx5e: Support XDP target xmit with dummy program net/mlx5e: Update XDP features in switch channels selftests/tc-testing: Test CAKE scheduler when enqueue drops packets net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop wireguard: netlink: generate netlink code wireguard: uapi: generate header with ynl-gen wireguard: uapi: move flag enums wireguard: uapi: move enum wg_cmd wireguard: netlink: add YNL specification selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py selftests: drv-net: introduce Iperf3Runner for measurement use cases selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive() Documentation: net: dsa: mention simple HSR offload helpers Documentation: net: dsa: mention availability of RedBox ... 2025-12-04T00:54:54+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-12-04T00:54:54+00:00 urn:sha1:015e7b0b0e8e51f7321ec2aafc1d7fc0a8a5536f Pull bpf updates from Alexei Starovoitov: - Convert selftests/bpf/test_tc_edt and test_tc_tunnel from .sh to test_progs runner (Alexis Lothoré) - Convert selftests/bpf/test_xsk to test_progs runner (Bastien Curutchet) - Replace bpf memory allocator with kmalloc_nolock() in bpf_local_storage (Amery Hung), and in bpf streams and range tree (Puranjay Mohan) - Introduce support for indirect jumps in BPF verifier and x86 JIT (Anton Protopopov) and arm64 JIT (Puranjay Mohan) - Remove runqslower bpf tool (Hoyeon Lee) - Fix corner cases in the verifier to close several syzbot reports (Eduard Zingerman, KaFai Wan) - Several improvements in deadlock detection in rqspinlock (Kumar Kartikeya Dwivedi) - Implement "jmp" mode for BPF trampoline and corresponding DYNAMIC_FTRACE_WITH_JMP. It improves "fexit" program type performance from 80 M/s to 136 M/s. With Steven's Ack. (Menglong Dong) - Add ability to test non-linear skbs in BPF_PROG_TEST_RUN (Paul Chaignon) - Do not let BPF_PROG_TEST_RUN emit invalid GSO types to stack (Daniel Borkmann) - Generalize buildid reader into bpf_dynptr (Mykyta Yatsenko) - Optimize bpf_map_update_elem() for map-in-map types (Ritesh Oedayrajsingh Varma) - Introduce overwrite mode for BPF ring buffer (Xu Kuohai) * tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (169 commits) bpf: optimize bpf_map_update_elem() for map-in-map types bpf: make kprobe_multi_link_prog_run always_inline selftests/bpf: do not hardcode target rate in test_tc_edt BPF program selftests/bpf: remove test_tc_edt.sh selftests/bpf: integrate test_tc_edt into test_progs selftests/bpf: rename test_tc_edt.bpf.c section to expose program type selftests/bpf: Add success stats to rqspinlock stress test rqspinlock: Precede non-head waiter queueing with AA check rqspinlock: Disable spinning for trylock fallback rqspinlock: Use trylock fallback when per-CPU rqnode is busy rqspinlock: Perform AA checks immediately rqspinlock: Enclose lock/unlock within lock entry acquisitions bpf: Remove runqslower tool selftests/bpf: Remove usage of lsm/file_alloc_security in selftest bpf: Disable file_alloc_security hook bpf: check for insn arrays in check_ptr_alignment bpf: force BPF_F_RDONLY_PROG on insn array creation bpf: Fix exclusive map memory leak selftests/bpf: Make CS length configurable for rqspinlock stress test selftests/bpf: Add lock wait time stats to rqspinlock stress test ... 2025-12-03T22:16:49+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-12-03T22:16:49+00:00 urn:sha1:784faa8eca8270671e0ed6d9d21f04bbb80fc5f7 Pull Rust updates from Miguel Ojeda: "Toolchain and infrastructure: - Add support for 'syn'. Syn is a parsing library for parsing a stream of Rust tokens into a syntax tree of Rust source code. Currently this library is geared toward use in Rust procedural macros, but contains some APIs that may be useful more generally. 'syn' allows us to greatly simplify writing complex macros such as 'pin-init' (Benno has already prepared the 'syn'-based version). We will use it in the 'macros' crate too. 'syn' is the most downloaded Rust crate (according to crates.io), and it is also used by the Rust compiler itself. While the amount of code is substantial, there should not be many updates needed for these crates, and even if there are, they should not be too big, e.g. +7k -3k lines across the 3 crates in the last year. 'syn' requires two smaller dependencies: 'quote' and 'proc-macro2'. I only modified their code to remove a third dependency ('unicode-ident') and to add the SPDX identifiers. The code can be easily verified to exactly match upstream with the provided scripts. They are all licensed under "Apache-2.0 OR MIT", like the other vendored 'alloc' crate we had for a while. Please see the merge commit with the cover letter for more context. - Allow 'unreachable_pub' and 'clippy::disallowed_names' for doctests. Examples (i.e. doctests) may want to do things like show public items and use names such as 'foo'. Nevertheless, we still try to keep examples as close to real code as possible (this is part of why running Clippy on doctests is important for us, e.g. for safety comments, which userspace Rust does not support yet but we are stricter). 'kernel' crate: - Replace our custom 'CStr' type with 'core::ffi::CStr'. Using the standard library type reduces our custom code footprint, and we retain needed custom functionality through an extension trait and a new 'fmt!' macro which replaces the previous 'core' import. This started in 6.17 and continued in 6.18, and we finally land the replacement now. This required quite some stamina from Tamir, who split the changes in steps to prepare for the flag day change here. - Replace 'kernel::c_str!' with C string literals. C string literals were added in Rust 1.77, which produce '&CStr's (the 'core' one), so now we can write: c"hi" instead of: c_str!("hi") - Add 'num' module for numerical features. It includes the 'Integer' trait, implemented for all primitive integer types. It also includes the 'Bounded' integer wrapping type: an integer value that requires only the 'N' least significant bits of the wrapped type to be encoded: // An unsigned 8-bit integer, of which only the 4 LSBs are used. let v = Bounded::<u8, 4>::new::<15>(); assert_eq!(v.get(), 15); 'Bounded' is useful to e.g. enforce guarantees when working with bitfields that have an arbitrary number of bits. Values can also be constructed from simple non-constant expressions or, for more complex ones, validated at runtime. 'Bounded' also comes with comparison and arithmetic operations (with both their backing type and other 'Bounded's with a compatible backing type), casts to change the backing type, extending/shrinking and infallible/fallible conversions from/to primitives as applicable. - 'rbtree' module: add immutable cursor ('Cursor'). It enables to use just an immutable tree reference where appropriate. The existing fully-featured mutable cursor is renamed to 'CursorMut'. kallsyms: - Fix wrong "big" kernel symbol type read from procfs. 'pin-init' crate: - A couple minor fixes (Benno asked me to pick these patches up for him this cycle). Documentation: - Quick Start guide: add Debian 13 (Trixie). Debian Stable is now able to build Linux, since Debian 13 (released 2025-08-09) packages Rust 1.85.0, which is recent enough. We are planning to propose that the minimum supported Rust version in Linux follows Debian Stable releases, with Debian 13 being the first one we upgrade to, i.e. Rust 1.85. MAINTAINERS: - Add entry for the new 'num' module. - Remove Alex as Rust maintainer: he hasn't had the time to contribute for a few years now, so it is a no-op change in practice. And a few other cleanups and improvements" * tag 'rust-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (53 commits) rust: macros: support `proc-macro2`, `quote` and `syn` rust: syn: enable support in kbuild rust: syn: add `README.md` rust: syn: remove `unicode-ident` dependency rust: syn: add SPDX License Identifiers rust: syn: import crate rust: quote: enable support in kbuild rust: quote: add `README.md` rust: quote: add SPDX License Identifiers rust: quote: import crate rust: proc-macro2: enable support in kbuild rust: proc-macro2: add `README.md` rust: proc-macro2: remove `unicode_ident` dependency rust: proc-macro2: add SPDX License Identifiers rust: proc-macro2: import crate rust: kbuild: support using libraries in `rustc_procmacro` rust: kbuild: support skipping flags in `rustc_test_library` rust: kbuild: add proc macro library support rust: kbuild: simplify `--cfg` handling rust: kbuild: introduce `core-flags` and `core-skip_flags` ...