kernel/linux.git/samples/vfio-mdev/mtty.c, branch v6.12.80

[tree-wide] finally take no_llseek out

2024-09-27T15:18:43+00:00

no_llseek had been defined to NULL two years ago, in commit 868941b14441 ("fs: remove no_llseek") To quote that commit, At -rc1 we'll need do a mechanical removal of no_llseek - git grep -l -w no_llseek | grep -v porting.rst | while read i; do sed -i '/\/d' $i done would do it. Unfortunately, that hadn't been done. Linus, could you do that now, so that we could finally put that thing to rest? All instances are of the form .llseek = no_llseek, so it's obviously safe. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds

vfio-mdev: add missing MODULE_DESCRIPTION() macros

2024-07-17T18:24:13+00:00

Since commit 1fffe7a34c89 ("script: modpost: emit a warning when the description is missing"), a module without a MODULE_DESCRIPTION() will result in a warning with make W=1. The following warnings are being observed in samples/vfio-mdev: WARNING: modpost: missing MODULE_DESCRIPTION() in samples/vfio-mdev/mtty.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/vfio-mdev/mdpy.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/vfio-mdev/mdpy-fb.o WARNING: modpost: missing MODULE_DESCRIPTION() in samples/vfio-mdev/mbochs.o Add the missing invocations of the MODULE_DESCRIPTION() macro to these modules. And in the case of mtty.c, remove the now redundant instance of the MODULE_INFO() macro. Signed-off-by: Jeff Johnson Link: https://lore.kernel.org/r/20240715-md-vfio-mdev-v2-1-59a4c5e924bc@quicinc.com Signed-off-by: Alex Williamson

eventfd: simplify eventfd_signal()

2023-11-28T13:08:38+00:00

Ever since the eventfd type was introduced back in 2007 in commit e1ad7468c77d ("signal/timer/event: eventfd core") the eventfd_signal() function only ever passed 1 as a value for @n. There's no point in keeping that additional argument. Link: https://lore.kernel.org/r/20231122-vfs-eventfd-signal-v2-2-bd549b14ce0c@kernel.org Acked-by: Xu Yilun Acked-by: Andrew Donnellan # ocxl Acked-by: Eric Farman # s390 Reviewed-by: Jan Kara Reviewed-by: Jens Axboe Signed-off-by: Christian Brauner

vfio/mtty: Enable migration support

2023-10-24T21:03:10+00:00

The mtty driver exposes a PCI serial device to userspace and therefore makes an easy target for a sample device supporting migration. The device does not make use of DMA, therefore we can easily claim support for the migration P2P states, as well as dirty logging. This implementation also makes use of PRE_COPY support in order to provide migration stream compatibility testing, which should generally be considered good practice. Reviewed-by: Cédric Le Goater Link: https://lore.kernel.org/r/20231016224736.2575718-3-alex.williamson@redhat.com Signed-off-by: Alex Williamson

vfio/mtty: Overhaul mtty interrupt handling

2023-10-24T21:02:55+00:00

The mtty driver does not currently conform to the vfio SET_IRQS uAPI. For example, it claims to support mask and unmask of INTx, but actually does nothing. It claims to support AUTOMASK for INTx, but doesn't. It fails to teardown eventfds under the full semantics specified by the SET_IRQS ioctl. It also fails to teardown eventfds when the device is closed, leading to memory leaks. It claims to support the request IRQ, but doesn't. Fix all these. A side effect of this is that QEMU will now report a warning: vfio : Failed to set up UNMASK eventfd signaling for interrupt \ INTX-0: VFIO_DEVICE_SET_IRQS failure: Inappropriate ioctl for device The fact is that the unmask eventfd was never supported but quietly failed. mtty never honored the AUTOMASK behavior, therefore there was nothing to unmask. QEMU is verbose about the failure, but properly falls back to userspace unmasking. Fixes: 9d1a546c53b4 ("docs: Sample driver to demonstrate how to use Mediated device framework.") Reviewed-by: Cédric Le Goater Link: https://lore.kernel.org/r/20231016224736.2575718-2-alex.williamson@redhat.com Signed-off-by: Alex Williamson

vfio-iommufd: Add detach_ioas support for emulated VFIO devices

2023-07-25T16:19:18+00:00

This prepares for adding DETACH ioctl for emulated VFIO devices. Reviewed-by: Kevin Tian Reviewed-by: Jason Gunthorpe Tested-by: Terrence Xu Tested-by: Nicolin Chen Tested-by: Matthew Rosato Tested-by: Yanting Jiang Tested-by: Shameer Kolothum Tested-by: Zhenzhong Duan Signed-off-by: Yi Liu Link: https://lore.kernel.org/r/20230718135551.6592-16-yi.l.liu@intel.com Signed-off-by: Alex Williamson

Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2023-04-27T18:53:57+00:00

Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...

vfio/mdev: Uses the vfio emulated iommufd ops set in the mdev sample drivers

2023-03-31T16:43:32+00:00

This harmonizes the no-DMA devices (the vfio-mdev sample drivers) with the emulated devices (gvt-g, vfio-ap etc.). It makes it easier to add BIND_IOMMUFD user interface which requires to return an iommufd ID to represent the device/iommufd bond. Link: https://lore.kernel.org/r/20230327093351.44505-6-yi.l.liu@intel.com Reviewed-by: Jason Gunthorpe Reviewed-by: Kevin Tian Tested-by: Terrence Xu Tested-by: Nicolin Chen Signed-off-by: Yi Liu Acked-by: Alex Williamson Signed-off-by: Jason Gunthorpe

driver core: class: remove module * from class_create()

2023-03-17T14:16:33+00:00

The module pointer in class_create() never actually did anything, and it shouldn't have been requred to be set as a parameter even if it did something. So just remove it and fix up all callers of the function in the kernel tree at the same time. Cc: "Rafael J. Wysocki" Acked-by: Benjamin Tissoires Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

vfio/ap/ccw/samples: Fix device_register() unwind path

2022-12-05T19:37:54+00:00

We always need to call put_device() if device_register() fails. All vfio drivers calling device_register() include a similar unwind stack via gotos, therefore split device_unregister() into its device_del() and put_device() components in the unwind path, and add a goto target to handle only the put_device() requirement. Reported-by: Ruan Jinjie Link: https://lore.kernel.org/all/20221118032827.3725190-1-ruanjinjie@huawei.com Fixes: d61fc96f47fd ("sample: vfio mdev display - host device") Fixes: 9d1a546c53b4 ("docs: Sample driver to demonstrate how to use Mediated device framework.") Fixes: a5e6e6505f38 ("sample: vfio bochs vbe display (host device for bochs-drm)") Fixes: 9e6f07cd1eaa ("vfio/ccw: create a parent struct") Fixes: 36360658eb5a ("s390: vfio_ap: link the vfio_ap devices to the vfio_ap bus subsystem") Cc: Tony Krowiak Cc: Halil Pasic Cc: Jason Herne Cc: Kirti Wankhede Reviewed-by: Kevin Tian Reviewed-by: Eric Farman Reviewed-by: Tony Krowiak Reviewed-by: Jason J. Herne Link: https://lore.kernel.org/r/166999942139.645727.12439756512449846442.stgit@omen Signed-off-by: Alex Williamson