kernel/linux.git/samples/bpf/Makefile, branch v4.15.6

kbuild: remove all dummy assignments to obj-

2017-11-18T02:46:06+00:00

Now kbuild core scripts create empty built-in.o where necessary. Remove "obj- := dummy.o" tricks. Signed-off-by: Masahiro Yamada

bpf: Revert bpf_overrid_function() helper changes.

2017-11-11T09:24:55+00:00

NACK'd by x86 maintainer. Signed-off-by: David S. Miller

samples/bpf: add a test for bpf_override_return

2017-11-11T03:18:06+00:00

This adds a basic test for bpf_override_return to verify it works. We override the main function for mounting a btrfs fs so it'll return -ENOMEM and then make sure that trying to mount a btrfs fs will fail. Acked-by: Alexei Starovoitov Signed-off-by: Josef Bacik Acked-by: Daniel Borkmann Signed-off-by: David S. Miller

xdp: Sample xdp program implementing ip forward

2017-11-08T01:39:41+00:00

Implements port to port forwarding with route table and arp table lookup for ipv4 packets using bpf_redirect helper function and lpm_trie map. Signed-off-by: Christina Jacob Signed-off-by: David S. Miller

bpf: move cgroup_helpers from samples/bpf/ to tools/testing/selftesting/bpf/

2017-11-05T14:26:51+00:00

The purpose of this move is to use these files in bpf tests. Signed-off-by: Roman Gushchin Acked-by: Alexei Starovoitov Acked-by: Tejun Heo Cc: Daniel Borkmann Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2017-11-04T00:26:51+00:00

Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

bpf: sample BPF_SOCKET_OPS_BASE_RTT program

2017-10-22T02:12:05+00:00

Sample socket_ops BPF program to test the BPF helper function bpf_getsocketops and the new socket_ops op BPF_SOCKET_OPS_BASE_RTT. The program provides a base RTT of 80us when the calling flow is within a DC (as determined by the IPV6 prefix) and the congestion algorithm is "nv". Signed-off-by: Lawrence Brakmo Acked-by: Daniel Borkmann Acked_by: Alexei Starovoitov Signed-off-by: David S. Miller

samples/bpf: add cpumap sample program xdp_redirect_cpu

2017-10-18T11:12:18+00:00

This sample program show how to use cpumap and the associated tracepoints. It provides command line stats, which shows how the XDP-RX process, cpumap-enqueue and cpumap kthread dequeue is cooperating on a per CPU basis. It also utilize the xdp_exception and xdp_redirect_err transpoints to allow users quickly to identify setup issues. One issue with ixgbe driver is that the driver reset the link when loading XDP. This reset the procfs smp_affinity settings. Thus, after loading the program, these must be reconfigured. The easiest workaround it to reduce the RX-queue to e.g. two via: # ethtool --set-channels ixgbe1 combined 2 And then add CPUs above 0 and 1, like: # xdp_redirect_cpu --dev ixgbe1 --prog 2 --cpu 2 --cpu 3 --cpu 4 Another issue with ixgbe is that the page recycle mechanism is tied to the RX-ring size. And the default setting of 512 elements is too small. This is the same issue with regular devmap XDP_REDIRECT. To overcome this I've been using 1024 rx-ring size: # ethtool -G ixgbe1 rx 1024 tx 1024 V3: - whitespace cleanups - bpf tracepoint cannot access top part of struct V4: - report on kthread sched events, according to tracepoint change - report average bulk enqueue size V5: - bpf_map_lookup_elem on cpumap not allowed from bpf_prog use separate map to mark CPUs not available V6: - correct kthread sched summary output V7: - Added a --stress-mode for concurrently changing underlying cpumap Signed-off-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller

bpf: Add -target to clang switch while cross compiling.

2017-10-16T20:04:32+00:00

Update to llvm excludes assembly instructions. llvm git revision is below commit 65fad7c26569 ("bpf: add inline-asm support") This change will be part of llvm release 6.0 __ASM_SYSREG_H define is not required for native compile. -target switch includes appropriate target specific files while cross compiling Tested on x86 and arm64. Signed-off-by: Abhijit Ayarekar Acked-by: Alexei Starovoitov Acked-by: Daniel Borkmann Signed-off-by: David S. Miller