kernel/linux.git/net, branch v6.12.80

net: add proper RCU protection to /proc/net/ptype

2026-04-02T11:09:50+00:00

[ Upstream commit f613e8b4afea0cd17c7168e8b00e25bc8d33175d ] Yin Fengwei reported an RCU stall in ptype_seq_show() and provided a patch. Real issue is that ptype_seq_next() and ptype_seq_show() violate RCU rules. ptype_seq_show() runs under rcu_read_lock(), and reads pt->dev to get device name without any barrier. At the same time, concurrent writers can remove a packet_type structure (which is correctly freed after an RCU grace period) and clear pt->dev without an RCU grace period. Define ptype_iter_state to carry a dev pointer along seq_net_private: struct ptype_iter_state { struct seq_net_private p; struct net_device *dev; // added in this patch }; We need to record the device pointer in ptype_get_idx() and ptype_seq_next() so that ptype_seq_show() is safe against concurrent pt->dev changes. We also need to add full RCU protection in ptype_seq_next(). (Missing READ_ONCE() when reading list.next values) Many thanks to Dong Chenchen for providing a repro. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Fixes: 1d10f8a1f40b ("net-procfs: show net devices bound packet types") Fixes: c353e8983e0d ("net: introduce per netns packet chains") Reported-by: Yin Fengwei Reported-by: Dong Chenchen Closes: https://lore.kernel.org/netdev/CANn89iKRRKPnWjJmb-_3a=sq+9h6DvTQM4DBZHT5ZRGPMzQaiA@mail.gmail.com/T/#m7b80b9fc9b9267f90e0b7aad557595f686f9c50d Signed-off-by: Eric Dumazet Reviewed-by: Willem de Bruijn Tested-by: Yin Fengwei Link: https://patch.msgid.link/20260202205217.2881198-1-edumazet@google.com Signed-off-by: Jakub Kicinski [ Some adjustments have been made. ] Signed-off-by: XiaoHua Wang <561399680@139.com> Signed-off-by: Greg Kroah-Hartman

can: isotp: fix tx.buf use-after-free in isotp_sendmsg()

2026-04-02T11:09:42+00:00

commit 424e95d62110cdbc8fd12b40918f37e408e35a92 upstream. isotp_sendmsg() uses only cmpxchg() on so->tx.state to serialize access to so->tx.buf. isotp_release() waits for ISOTP_IDLE via wait_event_interruptible() and then calls kfree(so->tx.buf). If a signal interrupts the wait_event_interruptible() inside close() while tx.state is ISOTP_SENDING, the loop exits early and release proceeds to force ISOTP_SHUTDOWN and continues to kfree(so->tx.buf) while sendmsg may still be reading so->tx.buf for the final CAN frame in isotp_fill_dataframe(). The so->tx.buf can be allocated once when the standard tx.buf length needs to be extended. Move the kfree() of this potentially extended tx.buf to sk_destruct time when either isotp_sendmsg() and isotp_release() are done. Fixes: 96d1c81e6a04 ("can: isotp: add module parameter for maximum pdu size") Cc: stable@vger.kernel.org Reported-by: Ali Norouzi Co-developed-by: Ali Norouzi Signed-off-by: Ali Norouzi Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260319-fix-can-gw-and-can-isotp-v2-2-c45d52c6d2d8@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: gw: fix OOB heap access in cgw_csum_crc8_rel()

2026-04-02T11:09:42+00:00

commit b9c310d72783cc2f30d103eed83920a5a29c671a upstream. cgw_csum_crc8_rel() correctly computes bounds-safe indices via calc_idx(): int from = calc_idx(crc8->from_idx, cf->len); int to = calc_idx(crc8->to_idx, cf->len); int res = calc_idx(crc8->result_idx, cf->len); if (from < 0 || to < 0 || res < 0) return; However, the loop and the result write then use the raw s8 fields directly instead of the computed variables: for (i = crc8->from_idx; ...) /* BUG: raw negative index */ cf->data[crc8->result_idx] = ...; /* BUG: raw negative index */ With from_idx = to_idx = result_idx = -64 on a 64-byte CAN FD frame, calc_idx(-64, 64) = 0 so the guard passes, but the loop iterates with i = -64, reading cf->data[-64], and the write goes to cf->data[-64]. This write might end up to 56 (7.0-rc) or 40 (<= 6.19) bytes before the start of the canfd_frame on the heap. The companion function cgw_csum_xor_rel() uses `from`/`to`/`res` correctly throughout; fix cgw_csum_crc8_rel() to match. Confirmed with KASAN on linux-7.0-rc2: BUG: KASAN: slab-out-of-bounds in cgw_csum_crc8_rel+0x515/0x5b0 Read of size 1 at addr ffff8880076619c8 by task poc_cgw_oob/62 To configure the can-gw crc8 checksums CAP_NET_ADMIN is needed. Fixes: 456a8a646b25 ("can: gw: add support for CAN FD frames") Cc: stable@vger.kernel.org Reported-by: Ali Norouzi Reviewed-by: Oliver Hartkopp Acked-by: Oliver Hartkopp Signed-off-by: Ali Norouzi Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260319-fix-can-gw-and-can-isotp-v2-1-c45d52c6d2d8@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

netfilter: ctnetlink: use netlink policy range checks

2026-04-02T11:09:37+00:00

[ Upstream commit 8f15b5071b4548b0aafc03b366eb45c9c6566704 ] Replace manual range and mask validations with netlink policy annotations in ctnetlink code paths, so that the netlink core rejects invalid values early and can generate extack errors. - CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at policy level, removing the manual >= TCP_CONNTRACK_MAX check. - CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE (14). The normal TCP option parsing path already clamps to this value, but the ctnetlink path accepted 0-255, causing undefined behavior when used as a u32 shift count. - CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with CTA_FILTER_F_ALL, removing the manual mask checks. - CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding a new mask define grouping all valid expect flags. Extracted from a broader nf-next patch by Florian Westphal, scoped to ctnetlink for the fixes tree. Fixes: c8e2078cfe41 ("[NETFILTER]: ctnetlink: add support for internal tcp connection tracking flags handling") Signed-off-by: David Carlier Co-developed-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

netfilter: nf_conntrack_sip: fix use of uninitialized rtp_addr in process_sdp

2026-04-02T11:09:37+00:00

[ Upstream commit 6a2b724460cb67caed500c508c2ae5cf012e4db4 ] process_sdp() declares union nf_inet_addr rtp_addr on the stack and passes it to the nf_nat_sip sdp_session hook after walking the SDP media descriptions. However rtp_addr is only initialized inside the media loop when a recognized media type with a non-zero port is found. If the SDP body contains no m= lines, only inactive media sections (m=audio 0 ...) or only unrecognized media types, rtp_addr is never assigned. Despite that, the function still calls hooks->sdp_session() with &rtp_addr, causing nf_nat_sdp_session() to format the stale stack value as an IP address and rewrite the SDP session owner and connection lines with it. With CONFIG_INIT_STACK_ALL_ZERO (default on most distributions) this results in the session-level o= and c= addresses being rewritten to 0.0.0.0 for inactive SDP sessions. Without stack auto-init the rewritten address is whatever happened to be on the stack. Fix this by pre-initializing rtp_addr from the session-level connection address (caddr) when available, and tracking via a have_rtp_addr flag whether any valid address was established. Skip the sdp_session hook entirely when no valid address exists. Fixes: 4ab9e64e5e3c ("[NETFILTER]: nf_nat_sip: split up SDP mangling") Reported-by: Xiang Mei Signed-off-by: Weiming Shi Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

netfilter: nf_conntrack_expect: skip expectations in other netns via proc

2026-04-02T11:09:37+00:00

[ Upstream commit 3db5647984de03d9cae0dcddb509b058351f0ee4 ] Skip expectations that do not reside in this netns. Similar to e77e6ff502ea ("netfilter: conntrack: do not dump other netns's conntrack entries via proc"). Fixes: 9b03f38d0487 ("netfilter: netns nf_conntrack: per-netns expectations") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

netfilter: ip6t_rt: reject oversized addrnr in rt_mt6_check()

2026-04-02T11:09:36+00:00

[ Upstream commit 9d3f027327c2fa265f7f85ead41294792c3296ed ] Reject rt match rules whose addrnr exceeds IP6T_RT_HOPS. rt_mt6() expects addrnr to stay within the bounds of rtinfo->addrs[]. Validate addrnr during rule installation so malformed rules are rejected before the match logic can use an out-of-range value. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Yifan Wu Reported-by: Juefei Pu Co-developed-by: Yuan Tan Signed-off-by: Yuan Tan Suggested-by: Xin Liu Tested-by: Yuhang Zheng Signed-off-by: Ren Wei Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

netfilter: nfnetlink_log: fix uninitialized padding leak in NFULA_PAYLOAD

2026-04-02T11:09:36+00:00

[ Upstream commit 52025ebaa29f4eb4ed8bf92ce83a68f24ab7fdf7 ] __build_packet_message() manually constructs the NFULA_PAYLOAD netlink attribute using skb_put() and skb_copy_bits(), bypassing the standard nla_reserve()/nla_put() helpers. While nla_total_size(data_len) bytes are allocated (including NLA alignment padding), only data_len bytes of actual packet data are copied. The trailing nla_padlen(data_len) bytes (1-3 when data_len is not 4-byte aligned) are never initialized, leaking stale heap contents to userspace via the NFLOG netlink socket. Replace the manual attribute construction with nla_reserve(), which handles the tailroom check, header setup, and padding zeroing via __nla_reserve(). The subsequent skb_copy_bits() fills in the payload data on top of the properly initialized attribute. Fixes: df6fb868d611 ("[NETFILTER]: nfnetlink: convert to generic netlink attribute functions") Reported-by: Xiang Mei Signed-off-by: Weiming Shi Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

tls: Purge async_hold in tls_decrypt_async_wait()

2026-04-02T11:09:36+00:00

[ Upstream commit 84a8335d8300576f1b377ae24abca1d9f197807f ] The async_hold queue pins encrypted input skbs while the AEAD engine references their scatterlist data. Once tls_decrypt_async_wait() returns, every AEAD operation has completed and the engine no longer references those skbs, so they can be freed unconditionally. A subsequent patch adds batch async decryption to tls_sw_read_sock(), introducing a new call site that must drain pending AEAD operations and release held skbs. Move __skb_queue_purge(&ctx->async_hold) into tls_decrypt_async_wait() so the purge is centralized and every caller -- recvmsg's drain path, the -EBUSY fallback in tls_do_decryption(), and the new read_sock batch path -- releases held skbs on synchronization without each site managing the purge independently. This fixes a leak when tls_strp_msg_hold() fails part-way through, after having added some cloned skbs to the async_hold queue. tls_decrypt_sg() will then call tls_decrypt_async_wait() to process all pending decrypts, and drop back to synchronous mode, but tls_sw_recvmsg() only flushes the async_hold queue when one record has been processed in "fully-async" mode, which may not be the case here. Signed-off-by: Chuck Lever Reported-by: Yiming Qian Fixes: b8a6ff84abbc ("tls: wait for pending async decryptions if tls_strp_msg_hold fails") Link: https://patch.msgid.link/20260324-tls-read-sock-v5-1-5408befe5774@oracle.com [pabeni@redhat.com: added leak comment] Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop

2026-04-02T11:09:36+00:00

[ Upstream commit 25f420a0d4cfd61d3d23ec4b9c56d9f443d91377 ] l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED state to support L2CAP reconfiguration (e.g. MTU changes). However, since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from the initial configuration, the reconfiguration path falls through to l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and retrans_list without freeing the previous allocations and sets chan->sdu to NULL without freeing the existing skb. This leaks all previously allocated ERTM resources. Additionally, l2cap_parse_conf_req() does not validate the minimum value of remote_mps derived from the RFC max_pdu_size option. A zero value propagates to l2cap_segment_sdu() where pdu_len becomes zero, causing the while loop to never terminate since len is never decremented, exhausting all available memory. Fix the double-init by skipping l2cap_ertm_init() and l2cap_chan_ready() when the channel is already in BT_CONNECTED state, while still allowing the reconfiguration parameters to be updated through l2cap_parse_conf_req(). Also add a pdu_len zero check in l2cap_segment_sdu() as a safeguard. Fixes: 96298f640104 ("Bluetooth: L2CAP: handle l2cap config request during open state") Signed-off-by: Hyunwoo Kim Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin