kernel/linux.git/net, branch v3.4.90

Bluetooth: Fix removing Long Term Key

2014-04-27T00:13:19+00:00

commit 5981a8821b774ada0be512fd9bad7c241e17657e upstream. This patch fixes authentication failure on LE link re-connection when BlueZ acts as slave (peripheral). LTK is removed from the internal list after its first use causing PIN or Key missing reply when re-connecting the link. The LE Long Term Key Request event indicates that the master is attempting to encrypt or re-encrypt the link. Pre-condition: BlueZ host paired and running as slave. How to reproduce(master): 1) Establish an ACL LE encrypted link 2) Disconnect the link 3) Try to re-establish the ACL LE encrypted link (fails) > HCI Event: LE Meta Event (0x3e) plen 19 LE Connection Complete (0x01) Status: Success (0x00) Handle: 64 Role: Slave (0x01) ... @ Device Connected: 00:02:72:DC:29:C9 (1) flags 0x0000 > HCI Event: LE Meta Event (0x3e) plen 13 LE Long Term Key Request (0x05) Handle: 64 Random number: 875be18439d9aa37 Encryption diversifier: 0x76ed < HCI Command: LE Long Term Key Request Reply (0x08|0x001a) plen 18 Handle: 64 Long term key: 2aa531db2fce9f00a0569c7d23d17409 > HCI Event: Command Complete (0x0e) plen 6 LE Long Term Key Request Reply (0x08|0x001a) ncmd 1 Status: Success (0x00) Handle: 64 > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 64 Encryption: Enabled with AES-CCM (0x01) ... @ Device Disconnected: 00:02:72:DC:29:C9 (1) reason 3 < HCI Command: LE Set Advertise Enable (0x08|0x000a) plen 1 Advertising: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 LE Set Advertise Enable (0x08|0x000a) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 LE Connection Complete (0x01) Status: Success (0x00) Handle: 64 Role: Slave (0x01) ... @ Device Connected: 00:02:72:DC:29:C9 (1) flags 0x0000 > HCI Event: LE Meta Event (0x3e) plen 13 LE Long Term Key Request (0x05) Handle: 64 Random number: 875be18439d9aa37 Encryption diversifier: 0x76ed < HCI Command: LE Long Term Key Request Neg Reply (0x08|0x001b) plen 2 Handle: 64 > HCI Event: Command Complete (0x0e) plen 6 LE Long Term Key Request Neg Reply (0x08|0x001b) ncmd 1 Status: Success (0x00) Handle: 64 > HCI Event: Disconnect Complete (0x05) plen 4 Status: Success (0x00) Handle: 64 Reason: Authentication Failure (0x05) @ Device Disconnected: 00:02:72:DC:29:C9 (1) reason 0 Signed-off-by: Claudio Takahasi Signed-off-by: Johan Hedberg Signed-off-by: Greg Kroah-Hartman

rds: prevent dereference of a NULL device in rds_iw_laddr_check

2014-04-27T00:13:18+00:00

[ Upstream commit bf39b4247b8799935ea91d90db250ab608a58e50 ] Binding might result in a NULL device which is later dereferenced without checking. Signed-off-by: Sasha Levin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ipv6: some ipv6 statistic counters failed to disable bh

2014-04-27T00:13:18+00:00

[ Upstream commit 43a43b6040165f7b40b5b489fe61a4cb7f8c4980 ] After commit c15b1ccadb323ea ("ipv6: move DAD and addrconf_verify processing to workqueue") some counters are now updated in process context and thus need to disable bh before doing so, otherwise deadlocks can happen on 32-bit archs. Fabio Estevam noticed this while while mounting a NFS volume on an ARM board. As a compensation for missing this I looked after the other *_STATS_BH and found three other calls which need updating: 1) icmp6_send: ip6_fragment -> icmpv6_send -> icmp6_send (error handling) 2) ip6_push_pending_frames: rawv6_sendmsg -> rawv6_push_pending_frames -> ... (only in case of icmp protocol with raw sockets in error handling) 3) ping6_v6_sendmsg (error handling) Fixes: c15b1ccadb323ea ("ipv6: move DAD and addrconf_verify processing to workqueue") Reported-by: Fabio Estevam Tested-by: Fabio Estevam Cc: Eric Dumazet Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ipv6: ip6_append_data_mtu do not handle the mtu of the second fragment properly

2014-04-27T00:13:17+00:00

[ Upstream commit e367c2d03dba4c9bcafad24688fadb79dd95b218 ] In ip6_append_data_mtu(), when the xfrm mode is not tunnel(such as transport),the ipsec header need to be added in the first fragment, so the mtu will decrease to reserve space for it, then the second fragment come, the mtu should be turn back, as the commit 0c1833797a5a6ec23ea9261d979aa18078720b74 said. however, in the commit a493e60ac4bbe2e977e7129d6d8cbb0dd236be, it use *mtu = min(*mtu, ...) to change the mtu, which lead to the new mtu is alway equal with the first fragment's. and cannot turn back. when I test through ping6 -c1 -s5000 $ip (mtu=1280): ...frag (0|1232) ESP(spi=0x00002000,seq=0xb), length 1232 ...frag (1232|1216) ...frag (2448|1216) ...frag (3664|1216) ...frag (4880|164) which should be: ...frag (0|1232) ESP(spi=0x00001000,seq=0x1), length 1232 ...frag (1232|1232) ...frag (2464|1232) ...frag (3696|1232) ...frag (4928|116) so delete the min() when change back the mtu. Signed-off-by: Xin Long Fixes: 75a493e60ac4bb ("ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size") Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ipv6: Avoid unnecessary temporary addresses being generated

2014-04-27T00:13:17+00:00

[ Upstream commit ecab67015ef6e3f3635551dcc9971cf363cc1cd5 ] tmp_prefered_lft is an offset to ifp->tstamp, not now. Therefore age needs to be added to the condition. Age calculation in ipv6_create_tempaddr is different from the one in addrconf_verify and doesn't consider ADDRCONF_TIMER_FUZZ_MINUS. This can cause age in ipv6_create_tempaddr to be less than the one in addrconf_verify and therefore unnecessary temporary address to be generated. Use age calculation as in addrconf_modify to avoid this. Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: socket: error on a negative msg_namelen

2014-04-27T00:13:17+00:00

[ Upstream commit dbb490b96584d4e958533fb637f08b557f505657 ] When copying in a struct msghdr from the user, if the user has set the msg_namelen parameter to a negative value it gets clamped to a valid size due to a comparison between signed and unsigned values. Ensure the syscall errors when the user passes in a negative value. Signed-off-by: Matthew Leach Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

vlan: Set correct source MAC address with TX VLAN offload enabled

2014-04-27T00:13:16+00:00

[ Upstream commit dd38743b4cc2f86be250eaf156cf113ba3dd531a ] With TX VLAN offload enabled the source MAC address for frames sent using the VLAN interface is currently set to the address of the real interface. This is wrong since the VLAN interface may be configured with a different address. The bug was introduced in commit 2205369a314e12fcec4781cc73ac9c08fc2b47de ("vlan: Fix header ops passthru when doing TX VLAN offload."). This patch sets the source address before calling the create function of the real interface. Signed-off-by: Peter Boström Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ipv6: don't set DST_NOCOUNT for remotely added routes

2014-04-27T00:13:16+00:00

[ Upstream commit c88507fbad8055297c1d1e21e599f46960cbee39 ] DST_NOCOUNT should only be used if an authorized user adds routes locally. In case of routes which are added on behalf of router advertisments this flag must not get used as it allows an unlimited number of routes getting added remotely. Signed-off-by: Sabrina Dubroca Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: unix: non blocking recvmsg() should not return -EINTR

2014-04-27T00:13:16+00:00

[ Upstream commit de1443916791d75fdd26becb116898277bb0273f ] Some applications didn't expect recvmsg() on a non blocking socket could return -EINTR. This possibility was added as a side effect of commit b3ca9b02b00704 ("net: fix multithreaded signal handling in unix recv routines"). To hit this bug, you need to be a bit unlucky, as the u->readlock mutex is usually held for very small periods. Fixes: b3ca9b02b00704 ("net: fix multithreaded signal handling in unix recv routines") Signed-off-by: Eric Dumazet Cc: Rainer Weikusat Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bridge: multicast: add sanity check for query source addresses

2014-04-27T00:13:16+00:00

[ Upstream commit 6565b9eeef194afbb3beec80d6dd2447f4091f8c ] MLD queries are supposed to have an IPv6 link-local source address according to RFC2710, section 4 and RFC3810, section 5.1.14. This patch adds a sanity check to ignore such broken MLD queries. Without this check, such malformed MLD queries can result in a denial of service: The queries are ignored by any MLD listener therefore they will not respond with an MLD report. However, without this patch these malformed MLD queries would enable the snooping part in the bridge code, potentially shutting down the according ports towards these hosts for multicast traffic as the bridge did not learn about these listeners. Reported-by: Jan Stancek Signed-off-by: Linus Lüssing Reviewed-by: Hannes Frederic Sowa Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman