kernel/linux.git/net/wireless/wext-compat.c, branch v7.0.10

Merge tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2026-02-26T16:00:13+00:00

Pull networking fixes from Paolo Abeni: "Including fixes from IPsec, Bluetooth and netfilter Current release - regressions: - wifi: fix dev_alloc_name() return value check - rds: fix recursive lock in rds_tcp_conn_slots_available Current release - new code bugs: - vsock: lock down child_ns_mode as write-once Previous releases - regressions: - core: - do not pass flow_id to set_rps_cpu() - consume xmit errors of GSO frames - netconsole: avoid OOB reads, msg is not nul-terminated - netfilter: h323: fix OOB read in decode_choice() - tcp: re-enable acceptance of FIN packets when RWIN is 0 - udplite: fix null-ptr-deref in __udp_enqueue_schedule_skb(). - wifi: brcmfmac: fix potential kernel oops when probe fails - phy: register phy led_triggers during probe to avoid AB-BA deadlock - eth: - bnxt_en: fix deleting of Ntuple filters - wan: farsync: fix use-after-free bugs caused by unfinished tasklets - xscale: check for PTP support properly Previous releases - always broken: - tcp: fix potential race in tcp_v6_syn_recv_sock() - kcm: fix zero-frag skb in frag_list on partial sendmsg error - xfrm: - fix race condition in espintcp_close() - always flush state and policy upon NETDEV_UNREGISTER event - bluetooth: - purge error queues in socket destructors - fix response to L2CAP_ECRED_CONN_REQ - eth: - mlx5: - fix circular locking dependency in dump - fix "scheduling while atomic" in IPsec MAC address query - gve: fix incorrect buffer cleanup for QPL - team: avoid NETDEV_CHANGEMTU event when unregistering slave - usb: validate USB endpoints" * tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) netfilter: nf_conntrack_h323: fix OOB read in decode_choice() dpaa2-switch: validate num_ifs to prevent out-of-bounds write net: consume xmit errors of GSO frames vsock: document write-once behavior of the child_ns_mode sysctl vsock: lock down child_ns_mode as write-once selftests/vsock: change tests to respect write-once child ns mode net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query net/mlx5: Fix missing devlink lock in SRIOV enable error path net/mlx5: E-switch, Clear legacy flag when moving to switchdev net/mlx5: LAG, disable MPESW in lag_disable_change() net/mlx5: DR, Fix circular locking dependency in dump selftests: team: Add a reference count leak test team: avoid NETDEV_CHANGEMTU event when unregistering slave net: mana: Fix double destroy_workqueue on service rescan PCI path MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER dpll: zl3073x: Remove redundant cleanup in devm_dpll_init() selftests/net: packetdrill: Verify acceptance of FIN packets when RWIN is 0 tcp: re-enable acceptance of FIN packets when RWIN is 0 vsock: Use container_of() to get net namespace in sysctl handlers net: usb: kaweth: validate USB endpoints ...

wifi: cfg80211: wext: fix IGTK key ID off-by-one

2026-02-23T08:18:59+00:00

The IGTK key ID must be 4 or 5, but the code checks against key ID + 1, so must check against 5/6 rather than 4/5. Fix that. Reported-by: Jouni Malinen Fixes: 08645126dd24 ("cfg80211: implement wext key handling") Link: https://patch.msgid.link/20260209181220.362205-2-johannes@sipsolutions.net Signed-off-by: Johannes Berg

Convert 'alloc_obj' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51+00:00

This was done entirely with mindless brute force, using git grep -l '\

treewide: Replace kmalloc with kmalloc_obj for non-scalar types

2026-02-21T09:02:28+00:00

This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook

wifi: cfg80211/mac80211: Add support to get radio index

2025-06-24T13:19:27+00:00

Currently, per-radio attributes are set on per-phy basis, i.e., all the radios present in a wiphy will take attributes values sent from user. But each radio in a wiphy can get different values from userspace based on its requirement. To extend support to set per-radio attributes, add support to get radio index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX, to get user specified radio index for which attributes should be changed. Pass this to individual drivers, so that the drivers can use this radio index to change per-radio attributes when necessary. Currently, per-radio attributes identified are: NL80211_ATTR_WIPHY_TX_POWER_LEVEL NL80211_ATTR_WIPHY_ANTENNA_TX NL80211_ATTR_WIPHY_ANTENNA_RX NL80211_ATTR_WIPHY_RETRY_SHORT NL80211_ATTR_WIPHY_RETRY_LONG NL80211_ATTR_WIPHY_FRAG_THRESHOLD NL80211_ATTR_WIPHY_RTS_THRESHOLD NL80211_ATTR_WIPHY_COVERAGE_CLASS NL80211_ATTR_TXQ_LIMIT NL80211_ATTR_TXQ_MEMORY_LIMIT NL80211_ATTR_TXQ_QUANTUM By default, the radio index is set to -1. This means the attribute should be treated as a global configuration. If the user has not specified any index, then the radio index passed to individual drivers would be -1. This would indicate that the attribute applies to all radios in that wiphy. Signed-off-by: Roopni Devanathan Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com Signed-off-by: Johannes Berg

wifi: cfg80211: send MLO links tx power info in GET_INTERFACE

2024-12-04T15:14:46+00:00

Currently, TX power is reported on interface/wdev level as part of NL80211_CMD_GET_INTERFACE. With MLO, Multiple links can be part of an interface/wdev and hence its necessary to report the TX power of each link. Add support to send tx power for all valid links of an MLD as part of NL80211_CMD_GET_INTERFACE request. As far as userspace is concerned, there is no behavioral change for Non-ML Interfaces. For ML interfaces, userspace should fetch TX power that is nested inside NL80211_ATTR_MLO_LINKS, similar to how channel info(NL80211_ATTR_WIPHY_FREQ) is fetched. Co-developed-by: Aaradhana Sahu Signed-off-by: Aaradhana Sahu Signed-off-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20241125083217.216095-2-quic_ramess@quicinc.com Signed-off-by: Johannes Berg

wifi: cfg80211: define and use wiphy guard

2024-12-04T15:10:52+00:00

Define a guard for the wiphy mutex, and use it in most code in cfg80211, though not all due to some interaction with RTNL and/or indentation. Suggested-by: Jeff Johnson Reviewed-by: Jeff Johnson Signed-off-by: Johannes Berg Link: https://patch.msgid.link/20241122094225.88765cbaab65.I610c9b14f36902e75e1d13f0db29f8bef2298804@changeid Signed-off-by: Johannes Berg

wifi: cfg80211: pass net_device to .set_monitor_channel

2024-10-23T14:45:35+00:00

Preparation for allowing multiple monitor interfaces with different channels on a multi-radio wiphy. Signed-off-by: Felix Fietkau Link: https://patch.msgid.link/35fa652dbfebf93343f8b9a08fdef0467a2a02dc.1728462320.git-series.nbd@nbd.name Signed-off-by: Johannes Berg

wifi: cfg80211: stop exporting wext symbols

2024-10-08T19:53:31+00:00

CFG80211_WEXT_EXPORT is no longer needed, if we only make ipw2200 return the static name for SIOCGIWNAME itself. Link: https://patch.msgid.link/20241007211431.8d4a7242ce92.I66ceb885ddfa52c368feeea1ea884bf988c525f2@changeid Signed-off-by: Johannes Berg

wifi: mac80211, cfg80211: miscellaneous spelling fixes

2024-10-08T19:52:09+00:00

Correct spelling here and there as suggested by codespell. Signed-off-by: Dmitry Antipov Link: https://patch.msgid.link/20240913084919.118862-1-dmantipov@yandex.ru Signed-off-by: Johannes Berg