kernel/linux.git/net/wireless/trace.h, branch linux-4.20.y

cfg80211: sort tracing properly

2018-10-02T07:59:07+00:00

There were supposed to be two blocks - one for each direction cfg80211 <-> driver, clean up the code to restore that. Signed-off-by: Johannes Berg

cfg80211: support FTM responder configuration/statistics

2018-10-02T07:56:30+00:00

Allow userspace to enable fine timing measurement responder functionality with configurable lci/civic parameters in AP mode. This can be done at AP start or changing beacon parameters. A new EXT_FEATURE flag is introduced for drivers to advertise the capability. Also nl80211 API support for retrieving statistics is added. Signed-off-by: Johannes Berg Signed-off-by: Pradeep Kumar Chitrapu [remove unused cfg80211_ftm_responder_params, clarify docs, move validation into policy] Signed-off-by: Johannes Berg

cfg80211: tracing: reuse wiphy_wdev_evt for rdev_get_txq_stats

2018-10-02T07:56:30+00:00

A simple cleanup, reuse the event definition that we already have. Signed-off-by: Johannes Berg

cfg80211: Add support for 60GHz band channels 5 and 6

2018-08-28T09:23:08+00:00

The current support in the 60GHz band is for channels 1-4. Add support for channels 5 and 6. This requires enlarging ieee80211_channel.center_freq from u16 to u32. Signed-off-by: Alexei Avshalom Lazar Signed-off-by: Johannes Berg

nl80211/mac80211: allow non-linear skb in rx_control_port

2018-07-06T12:34:42+00:00

The current implementation of cfg80211_rx_control_port assumed that the caller could provide a contiguous region of memory for the control port frame to be sent up to userspace. Unfortunately, many drivers produce non-linear skbs, especially for data frames. This resulted in userspace getting notified of control port frames with correct metadata (from address, port, etc) yet garbage / nonsense contents, resulting in bad handshakes, disconnections, etc. mac80211 linearizes skbs containing management frames. But it didn't seem worthwhile to do this for control port frames. Thus the signature of cfg80211_rx_control_port was changed to take the skb directly. nl80211 then takes care of obtaining control port frame data directly from the (linear | non-linear) skb. The caller is still responsible for freeing the skb, cfg80211_rx_control_port does not take ownership of it. Fixes: 6a671a50f819 ("nl80211: Add CMD_CONTROL_PORT_FRAME API") Signed-off-by: Denis Kenzior [fix some kernel-doc formatting, add fixes tag] Signed-off-by: Johannes Berg

cfg80211: Expose TXQ stats and parameters to userspace

2018-05-08T11:19:24+00:00

This adds support for exporting the mac80211 TXQ stats via nl80211 by way of a nested TXQ stats attribute, as well as for configuring the quantum and limits that were previously only changeable through debugfs. This commit adds just the nl80211 API, a subsequent commit adds support to mac80211 itself. Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: Johannes Berg

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

2018-04-01T03:33:04+00:00

Daniel Borkmann says: ==================== pull-request: bpf-next 2018-03-31 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add raw BPF tracepoint API in order to have a BPF program type that can access kernel internal arguments of the tracepoints in their raw form similar to kprobes based BPF programs. This infrastructure also adds a new BPF_RAW_TRACEPOINT_OPEN command to BPF syscall which returns an anon-inode backed fd for the tracepoint object that allows for automatic detach of the BPF program resp. unregistering of the tracepoint probe on fd release, from Alexei. 2) Add new BPF cgroup hooks at bind() and connect() entry in order to allow BPF programs to reject, inspect or modify user space passed struct sockaddr, and as well a hook at post bind time once the port has been allocated. They are used in FB's container management engine for implementing policy, replacing fragile LD_PRELOAD wrapper intercepting bind() and connect() calls that only works in limited scenarios like glibc based apps but not for other runtimes in containerized applications, from Andrey. 3) BPF_F_INGRESS flag support has been added to sockmap programs for their redirect helper call bringing it in line with cls_bpf based programs. Support is added for both variants of sockmap programs, meaning for tx ULP hooks as well as recv skb hooks, from John. 4) Various improvements on BPF side for the nfp driver, besides others this work adds BPF map update and delete helper call support from the datapath, JITing of 32 and 64 bit XADD instructions as well as offload support of bpf_get_prandom_u32() call. Initial implementation of nfp packet cache has been tackled that optimizes memory access (see merge commit for further details), from Jakub and Jiong. 5) Removal of struct bpf_verifier_env argument from the print_bpf_insn() API has been done in order to prepare to use print_bpf_insn() soon out of perf tool directly. This makes the print_bpf_insn() API more generic and pushes the env into private data. bpftool is adjusted as well with the print_bpf_insn() argument removal, from Jiri. 6) Couple of cleanups and prep work for the upcoming BTF (BPF Type Format). The latter will reuse the current BPF verifier log as well, thus bpf_verifier_log() is further generalized, from Martin. 7) For bpf_getsockopt() and bpf_setsockopt() helpers, IPv4 IP_TOS read and write support has been added in similar fashion to existing IPv6 IPV6_TCLASS socket option we already have, from Nikita. 8) Fixes in recent sockmap scatterlist API usage, which did not use sg_init_table() for initialization thus triggering a BUG_ON() in scatterlist API when CONFIG_DEBUG_SG was enabled. This adds and uses a small helper sg_init_marker() to properly handle the affected cases, from Prashant. 9) Let the BPF core follow IDR code convention and therefore use the idr_preload() and idr_preload_end() helpers, which would also help idr_alloc_cyclic() under GFP_ATOMIC to better succeed under memory pressure, from Shaohua. 10) Last but not least, a spelling fix in an error message for the BPF cookie UID helper under BPF sample code, from Colin. ==================== Signed-off-by: David S. Miller

nl80211: Implement TX of control port frames

2018-03-29T11:44:19+00:00

This commit implements the TX side of NL80211_CMD_CONTROL_PORT_FRAME. Userspace provides the raw EAPoL frame using NL80211_ATTR_FRAME. Userspace should also provide the destination address and the protocol type to use when sending the frame. This is used to implement TX of Pre-authentication frames. If CONTROL_PORT_ETHERTYPE_NO_ENCRYPT is specified, then the driver will be asked not to encrypt the outgoing frame. A new EXT_FEATURE flag is introduced so that nl80211 code can check whether a given wiphy has capability to pass EAPoL frames over nl80211. Signed-off-by: Denis Kenzior Signed-off-by: Johannes Berg

nl80211: Add CMD_CONTROL_PORT_FRAME API

2018-03-29T11:44:04+00:00

This commit also adds cfg80211_rx_control_port function. This is used to generate a CMD_CONTROL_PORT_FRAME event out to userspace. The conn_owner_nlportid is used as the unicast destination. This means that userspace must specify NL80211_ATTR_SOCKET_OWNER flag if control port over nl80211 routing is requested in NL80211_CMD_CONNECT, NL80211_CMD_ASSOCIATE, NL80211_CMD_START_AP or IBSS/mesh join. Signed-off-by: Denis Kenzior [johannes: fix return value of cfg80211_rx_control_port()] Signed-off-by: Johannes Berg

treewide: remove large struct-pass-by-value from tracepoint arguments

2018-03-28T20:55:18+00:00

- fix trace_hfi1_ctxt_info() to pass large struct by reference instead of by value - convert 'type array[]' tracepoint arguments into 'type *array', since compiler will warn that sizeof('type array[]') == sizeof('type *array') and later should be used instead The CAST_TO_U64 macro in the later patch will enforce that tracepoint arguments can only be integers, pointers, or less than 8 byte structures. Larger structures should be passed by reference. Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann