kernel/linux.git/net/wireless/rdev-ops.h, branch v6.6.131

wifi: cfg80211: fix 6 GHz scan request building

2024-07-25T07:50:41+00:00

[ Upstream commit f7a8b10bfd614d7a9a16fbe80d28ead4f063cb00 ] The 6 GHz scan request struct allocated by cfg80211_scan_6ghz() is meant to be formed this way: [base struct][channels][ssids][6ghz_params] It is allocated with [channels] as the maximum number of channels supported by the driver in the 6 GHz band, since allocation is before knowing how many there will be. However, the inner pointers are set incorrectly: initially, the 6 GHz scan parameters pointer is set: [base struct][channels] ^ scan_6ghz_params and later the SSID pointer is set to the end of the actually _used_ channels. [base struct][channels] ^ ssids If many APs were to be discovered, and many channels used, and there were many SSIDs, then the SSIDs could overlap the 6 GHz parameters. Additionally, the request->ssids for most of the function points to the original request still (given the struct copy) but is used normally, which is confusing. Clear this up, by actually using the allocated space for 6 GHz parameters _after_ the SSIDs, and set up the SSIDs initially so they are used more clearly. Just like in nl80211.c, set them only if there actually are SSIDs though. Finally, also copy the elements (ie/ie_len) so they're part of the same request, not pointing to the old request. Co-developed-by: Miri Korenblit Signed-off-by: Miri Korenblit Reviewed-by: Ilan Peer Signed-off-by: Johannes Berg Link: https://msgid.link/20240510113738.4190692ef4ee.I0cb19188be17a8abd029805e3373c0a7777c214c@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

wifi: cfg80211: add inform_bss op to update BSS

2023-06-19T10:05:28+00:00

This new function is called from within the inform_bss(_frame)_data functions in order for the driver to update data that it is tracking. Signed-off-by: Benjamin Berg Signed-off-by: Gregory Greenman Link: https://lore.kernel.org/r/20230616094949.8d7781b0f965.I80041183072b75c081996a1a5a230b34aff5c668@changeid Signed-off-by: Johannes Berg

wifi: cfg80211: make TDLS management link-aware

2023-06-19T10:05:27+00:00

For multi-link operation(MLO) TDLS management frames need to be transmitted on a specific link. The TDLS setup request will add BSSID along with peer address and userspace will pass the link-id based on BSSID value to the driver(or mac80211). Signed-off-by: Mukesh Sisodiya Signed-off-by: Gregory Greenman Link: https://lore.kernel.org/r/20230616094948.cb3d87c22812.Ia3d15ac4a9a182145bf2d418bcb3ddf4539cd0a7@changeid Signed-off-by: Johannes Berg

wifi: cfg80211: fix link del callback to call correct handler

2023-06-09T11:30:16+00:00

The wrapper function was incorrectly calling the add handler instead of the del handler. This had no negative side effect as the default handlers are essentially identical. Fixes: f2a0290b2df2 ("wifi: cfg80211: add optional link add/remove callbacks") Signed-off-by: Benjamin Berg Signed-off-by: Gregory Greenman Link: https://lore.kernel.org/r/20230608163202.ebd00e000459.Iaff7dc8d1cdecf77f53ea47a0e5080caa36ea02a@changeid Signed-off-by: Johannes Berg

wifi: nl80211: add a command to enable/disable HW timestamping

2023-03-07T09:52:00+00:00

Add a command to enable and disable HW timestamping of TM and FTM frames. HW timestamping can be enabled for a specific mac address or for all addresses. The low level driver will indicate how many peers HW timestamping can be enabled concurrently, and this information will be passed to userspace. Signed-off-by: Avraham Stern Signed-off-by: Gregory Greenman Link: https://lore.kernel.org/r/20230301115906.05678d7b1c17.Iccc08869ea8156f1c71a3111a47f86dd56234bd0@changeid [switch to needing netdev UP, minor edits] Signed-off-by: Johannes Berg

wifi: cfg80211: Add link_id parameter to various key operations for MLO

2022-08-25T08:41:05+00:00

Add support for various key operations on MLD by adding new parameter link_id. Pass the link_id received from userspace to driver for add_key, get_key, del_key, set_default_key, set_default_mgmt_key and set_default_beacon_key to support configuring keys specific to each MLO link. Userspace must not specify link ID for MLO pairwise key since it is common for all the MLO links. Signed-off-by: Veerendranath Jakkam Link: https://lore.kernel.org/r/20220730052643.1959111-4-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg

wifi: cfg80211/mac80211: Support control port TX from specific link

2022-07-15T09:43:19+00:00

In case of authentication with a legacy station, link addressed EAPOL frames should be sent. Support it. Signed-off-by: Andrei Otcheretianski Signed-off-by: Johannes Berg

wifi: cfg80211: drop BSS elements from assoc trace for now

2022-07-15T09:43:14+00:00

For multi-link operation, this cannot work as the req->bss pointer will be NULL, and we'll need to do more work on this to really add tracing for the MLO case here. Drop the BSS elements for now as they're not the most useful thing, and it's hard to size things correctly for the MLO case (without adding a lot of code that's also executed when tracing isn't enabled.) Reported-by: Dan Carpenter Signed-off-by: Johannes Berg

wifi: cfg80211: add API to add/modify/remove a link station

2022-07-15T09:43:13+00:00

Add an API for adding/modifying/removing a link of a station. Signed-off-by: Shaul Triebitz Signed-off-by: Johannes Berg

wifi: cfg80211: add optional link add/remove callbacks

2022-06-20T10:56:11+00:00

Add some optional callbacks for link add/remove so that drivers can react here. Initially, I thought it would be sufficient to just create the link in start_ap etc., but it turns out that's not so simple, since there are quite a few callbacks that can be called: if they're erroneously without start_ap, things might crash. Thus it might be easier for drivers to allocate all the necessary data structures immediately, to not have to worry about it in each callback, since cfg80211 checks that the link ID is valid (has been added.) Signed-off-by: Johannes Berg