kernel/linux.git/net/tipc/core.h, branch v7.0-rc7

kernel.h: drop hex.h and update all hex.h users

2026-01-21T03:44:19+00:00

Remove from and update all users/callers of hex.h interfaces to directly #include as part of the process of putting kernel.h on a diet. Removing hex.h from kernel.h means that 36K C source files don't have to pay the price of parsing hex.h for the roughly 120 C source files that need it. This change has been build-tested with allmodconfig on most ARCHes. Also, all users/callers of in the entire source tree have been updated if needed (if not already #included). Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap Reviewed-by: Andy Shevchenko Cc: Ingo Molnar Cc: Yury Norov (NVIDIA) Signed-off-by: Andrew Morton

tipc: Remove unused struct declaration

2024-07-12T02:41:32+00:00

struct tipc_name_table in core.h is not used. Remove this declaration. Signed-off-by: Shigeru Yoshida Reviewed-by: Tung Nguyen Signed-off-by: David S. Miller

minmax: add in_range() macro

2023-08-24T23:20:18+00:00

Patch series "New page table range API", v6. This patchset changes the API used by the MM to set up page table entries. The four APIs are: set_ptes(mm, addr, ptep, pte, nr) update_mmu_cache_range(vma, addr, ptep, nr) flush_dcache_folio(folio) flush_icache_pages(vma, page, nr) flush_dcache_folio() isn't technically new, but no architecture implemented it, so I've done that for them. The old APIs remain around but are mostly implemented by calling the new interfaces. The new APIs are based around setting up N page table entries at once. The N entries belong to the same PMD, the same folio and the same VMA, so ptep++ is a legitimate operation, and locking is taken care of for you. Some architectures can do a better job of it than just a loop, but I have hesitated to make too deep a change to architectures I don't understand well. One thing I have changed in every architecture is that PG_arch_1 is now a per-folio bit instead of a per-page bit when used for dcache clean/dirty tracking. This was something that would have to happen eventually, and it makes sense to do it now rather than iterate over every page involved in a cache flush and figure out if it needs to happen. The point of all this is better performance, and Fengwei Yin has measured improvement on x86. I suspect you'll see improvement on your architecture too. Try the new will-it-scale test mentioned here: https://lore.kernel.org/linux-mm/20230206140639.538867-5-fengwei.yin@intel.com/ You'll need to run it on an XFS filesystem and have CONFIG_TRANSPARENT_HUGEPAGE set. This patchset is the basis for much of the anonymous large folio work being done by Ryan, so it's received quite a lot of testing over the last few months. This patch (of 38): Determine if a value lies within a range more efficiently (subtraction + comparison vs two comparisons and an AND). It also has useful (under some circumstances) behaviour if the range exceeds the maximum value of the type. Convert all the conflicting definitions of in_range() within the kernel; some can use the generic definition while others need their own definition. Link: https://lkml.kernel.org/r/20230802151406.3735276-1-willy@infradead.org Link: https://lkml.kernel.org/r/20230802151406.3735276-2-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) Signed-off-by: Andrew Morton

tipc: simplify the finalize work queue

2021-05-18T20:22:09+00:00

This patch is to use "struct work_struct" for the finalize work queue instead of "struct tipc_net_work", as it can get the "net" and "addr" from tipc_net's other members and there is no need to add extra net and addr in tipc_net by defining "struct tipc_net_work". Note that it's safe to get net from tn->bcl as bcl is always released after the finalize work queue is done. Signed-off-by: Xin Long Acked-by: Jon Maloy Signed-off-by: David S. Miller

tipc: wait and exit until all work queues are done

2021-05-17T21:07:48+00:00

On some host, a crash could be triggered simply by repeating these commands several times: # modprobe tipc # tipc bearer enable media udp name UDP1 localip 127.0.0.1 # rmmod tipc [] BUG: unable to handle kernel paging request at ffffffffc096bb00 [] Workqueue: events 0xffffffffc096bb00 [] Call Trace: [] ? process_one_work+0x1a7/0x360 [] ? worker_thread+0x30/0x390 [] ? create_worker+0x1a0/0x1a0 [] ? kthread+0x116/0x130 [] ? kthread_flush_work_fn+0x10/0x10 [] ? ret_from_fork+0x35/0x40 When removing the TIPC module, the UDP tunnel sock will be delayed to release in a work queue as sock_release() can't be done in rtnl_lock(). If the work queue is schedule to run after the TIPC module is removed, kernel will crash as the work queue function cleanup_beareri() code no longer exists when trying to invoke it. To fix it, this patch introduce a member wq_count in tipc_net to track the numbers of work queues in schedule, and wait and exit until all work queues are done in tipc_exit_net(). Fixes: d0f91938bede ("tipc: add ip/udp media type") Reported-by: Shuang Li Signed-off-by: Xin Long Acked-by: Jon Maloy Signed-off-by: David S. Miller

tipc: make node number calculation reproducible

2020-11-28T01:34:01+00:00

The 32-bit node number, aka node hash or node address, is calculated based on the 128-bit node identity when it is not set explicitly by the user. In future commits we will need to perform this hash operation on peer nodes while feeling safe that we obtain the same result. We do this by interpreting the initial hash as a network byte order number. Whenever we need to use the number locally on a node we must therefore translate it to host byte order to obtain an architecure independent result. Furthermore, given the context where we use this number, we must not allow it to be zero unless the node identity also is zero. Hence, in the rare cases when the xor-ed hash value may end up as zero we replace it with a fix number, knowing that the code anyway is capable of handling hash collisions. Acked-by: Ying Xue Signed-off-by: Jon Maloy Signed-off-by: Jakub Kicinski

tipc: remove dead code in tipc_net and relatives

2020-10-30T20:11:47+00:00

dist_queue is no longer used since commit 37922ea4a310 ("tipc: permit overlapping service ranges in name table") Acked-by: Jon Maloy Acked-by: Ying Xue Signed-off-by: Hoang Huu Le Link: https://lore.kernel.org/r/20201028032712.31009-1-hoang.h.le@dektech.com.au Signed-off-by: Jakub Kicinski

tipc: fix a deadlock when flushing scheduled work

2020-09-07T19:08:53+00:00

In the commit fdeba99b1e58 ("tipc: fix use-after-free in tipc_bcast_get_mode"), we're trying to make sure the tipc_net_finalize_work work item finished if it enqueued. But calling flush_scheduled_work() is not just affecting above work item but either any scheduled work. This has turned out to be overkill and caused to deadlock as syzbot reported: ====================================================== WARNING: possible circular locking dependency detected 5.9.0-rc2-next-20200828-syzkaller #0 Not tainted ------------------------------------------------------ kworker/u4:6/349 is trying to acquire lock: ffff8880aa063d38 ((wq_completion)events){+.+.}-{0:0}, at: flush_workqueue+0xe1/0x13e0 kernel/workqueue.c:2777 but task is already holding lock: ffffffff8a879430 (pernet_ops_rwsem){++++}-{3:3}, at: cleanup_net+0x9b/0xb10 net/core/net_namespace.c:565 [...] Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(pernet_ops_rwsem); lock(&sb->s_type->i_mutex_key#13); lock(pernet_ops_rwsem); lock((wq_completion)events); *** DEADLOCK *** [...] v1: To fix the original issue, we replace above calling by introducing a bit flag. When a namespace cleaned-up, bit flag is set to zero and: - tipc_net_finalize functionial just does return immediately. - tipc_net_finalize_work does not enqueue into the scheduled work queue. v2: Use cancel_work_sync() helper to make sure ONLY the tipc_net_finalize_work() stopped before releasing bcbase object. Reported-by: syzbot+d5aa7e0385f6a5d0f4fd@syzkaller.appspotmail.com Fixes: fdeba99b1e58 ("tipc: fix use-after-free in tipc_bcast_get_mode") Acked-by: Jon Maloy Signed-off-by: Hoang Huu Le Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2019-11-17T05:51:42+00:00

Lots of overlapping changes and parallel additions, stuff like that. Signed-off-by: David S. Miller

tipc: add back tipc prefix to log messages

2019-11-15T02:03:03+00:00

The tipc prefix for log messages generated by tipc was removed in commit 07f6c4bc048a ("tipc: convert tipc reference table to use generic rhashtable"). This is still a useful prefix so add it back. Signed-off-by: Matt Bennett Acked-by: Jon Maloy Signed-off-by: David S. Miller