kernel/linux.git/net/smc, branch v6.1.175

net/smc: reject CHID-0 ACCEPT that matches an empty ism_dev slot

2026-06-01T15:39:40+00:00

[ Upstream commit 277740023def559a4a2ddc3e8e784ee37a0f16a9 ] On the SMC-D client, slot 0 of ini->ism_dev[]/ini->ism_chid[] is reserved for an SMC-Dv1 device. smc_find_ism_v2_device_clnt() populates V2 entries starting at index 1, so when no V1 device is selected slot 0 is left in its kzalloc()'ed state with ism_dev[0] == NULL and ism_chid[0] == 0. smc_v2_determine_accepted_chid() then matches the peer's CHID against the array starting from index 0 using the CHID alone. A malicious peer replying to a SMC-Dv2-only proposal with d1.chid == 0 matches the empty slot, ini->ism_selected becomes 0, and the subsequent ism_dev[0]->lgr_lock dereference in smc_conn_create() faults at offsetof(struct smcd_dev, lgr_lock) == 0x68: BUG: KASAN: null-ptr-deref in _raw_spin_lock_bh+0x79/0xe0 Write of size 4 at addr 0000000000000068 by task exploit/144 Call Trace: _raw_spin_lock_bh smc_conn_create (net/smc/smc_core.c:1997) __smc_connect (net/smc/af_smc.c:1447) smc_connect (net/smc/af_smc.c:1720) __sys_connect __x64_sys_connect do_syscall_64 Require ism_dev[i] to be non-NULL before accepting a CHID match. Fixes: a7c9c5f4af7f ("net/smc: CLC accept / confirm V2") Reported-by: Weiming Shi Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Xiang Mei Link: https://patch.msgid.link/20260511062138.2839584-1-xmei5@asu.edu Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net/smc: avoid NULL deref of conn->lnk in smc_msg_event tracepoint

2026-06-01T15:39:40+00:00

[ Upstream commit 7bf563badd37cb796df5477d2b78bb64148a1268 ] The smc_msg_event tracepoint class, shared by smc_tx_sendmsg and smc_rx_recvmsg, unconditionally dereferences smc->conn.lnk: __string(name, smc->conn.lnk->ibname) conn->lnk is only set for SMC-R; for SMC-D it is NULL. Other code on these paths already handles this (e.g. !conn->lnk in SMC_STAT_RMB_TX_SIZE_SMALL()). With the tracepoint enabled, the first sendmsg()/recvmsg() on an SMC-D socket crashes: Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [...] RIP: 0010:strlen+0x1e/0xa0 Call Trace: trace_event_raw_event_smc_msg_event (net/smc/smc_tracepoint.h:44) smc_rx_recvmsg (net/smc/smc_rx.c:515) smc_recvmsg (net/smc/af_smc.c:2859) __sys_recvfrom (net/socket.c:2315) __x64_sys_recvfrom (net/socket.c:2326) do_syscall_64 The faulting address 0x3e0 is offsetof(struct smc_link, ibname), confirming the NULL ->lnk deref. Enabling the tracepoint requires root, but the trigger itself is unprivileged: socket(AF_SMC, ...) has no capability check, and SMC-D negotiation needs no admin step on s390 or on x86 with the loopback ISM device loaded. Log an empty device name for SMC-D instead of dereferencing NULL. Fixes: aff3083f10bf ("net/smc: Introduce tracepoints for tx and rx msg") Reported-by: Weiming Shi Signed-off-by: Xiang Mei Reviewed-by: Dust Li Reviewed-by: Sidraya Jayagond Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net/smc: avoid early lgr access in smc_clc_wait_msg

2026-06-01T15:38:47+00:00

commit 5a8db80f721deee8e916c2cfdee78decda02ce4f upstream. A CLC decline can be received while the handshake is still in an early stage, before the connection has been associated with a link group. The decline handling in smc_clc_wait_msg() updates link-group level sync state for first-contact declines, but that state only exists after link group setup has completed. Guard the link-group update accordingly and keep the per-socket peer diagnosis handling unchanged. This preserves the existing sync_err handling for established link-group contexts and avoids touching link-group state before it is available. Fixes: 0cfdd8f92cac ("smc: connection and link group creation") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Ruijie Li Signed-off-by: Ren Wei Reviewed-by: Dust Li Link: https://patch.msgid.link/08c68a5c817acf198cce63d22517e232e8d60718.1776850759.git.ruijieli51@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net/smc: fix double-free of smc_spd_priv when tee() duplicates splice pipe buffer

2026-04-11T12:16:07+00:00

[ Upstream commit 24dd586bb4cbba1889a50abe74143817a095c1c9 ] smc_rx_splice() allocates one smc_spd_priv per pipe_buffer and stores the pointer in pipe_buffer.private. The pipe_buf_operations for these buffers used .get = generic_pipe_buf_get, which only increments the page reference count when tee(2) duplicates a pipe buffer. The smc_spd_priv pointer itself was not handled, so after tee() both the original and the cloned pipe_buffer share the same smc_spd_priv *. When both pipes are subsequently released, smc_rx_pipe_buf_release() is called twice against the same object: 1st call: kfree(priv) sock_put(sk) smc_rx_update_cons() [correct] 2nd call: kfree(priv) sock_put(sk) smc_rx_update_cons() [UAF] KASAN reports a slab-use-after-free in smc_rx_pipe_buf_release(), which then escalates to a NULL-pointer dereference and kernel panic via smc_rx_update_consumer() when it chases the freed priv->smc pointer: BUG: KASAN: slab-use-after-free in smc_rx_pipe_buf_release+0x78/0x2a0 Read of size 8 at addr ffff888004a45740 by task smc_splice_tee_/74 Call Trace: dump_stack_lvl+0x53/0x70 print_report+0xce/0x650 kasan_report+0xc6/0x100 smc_rx_pipe_buf_release+0x78/0x2a0 free_pipe_info+0xd4/0x130 pipe_release+0x142/0x160 __fput+0x1c6/0x490 __x64_sys_close+0x4f/0x90 do_syscall_64+0xa6/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f BUG: kernel NULL pointer dereference, address: 0000000000000020 RIP: 0010:smc_rx_update_consumer+0x8d/0x350 Call Trace: smc_rx_pipe_buf_release+0x121/0x2a0 free_pipe_info+0xd4/0x130 pipe_release+0x142/0x160 __fput+0x1c6/0x490 __x64_sys_close+0x4f/0x90 do_syscall_64+0xa6/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Kernel panic - not syncing: Fatal exception Beyond the memory-safety problem, duplicating an SMC splice buffer is semantically questionable: smc_rx_update_cons() would advance the consumer cursor twice for the same data, corrupting receive-window accounting. A refcount on smc_spd_priv could fix the double-free, but the cursor-accounting issue would still need to be addressed separately. The .get callback is invoked by both tee(2) and splice_pipe_to_pipe() for partial transfers; both will now return -EFAULT. Users who need to duplicate SMC socket data must use a copy-based read path. Fixes: 9014db202cb7 ("smc: add support for splice()") Signed-off-by: Qi Tang Link: https://patch.msgid.link/20260318064847.23341-1-tpluszz77@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net/smc: fix NULL dereference and UAF in smc_tcp_syn_recv_sock()

2026-03-25T10:03:21+00:00

[ Upstream commit 6d5e4538364b9ceb1ac2941a4deb86650afb3538 ] Syzkaller reported a panic in smc_tcp_syn_recv_sock() [1]. smc_tcp_syn_recv_sock() is called in the TCP receive path (softirq) via icsk_af_ops->syn_recv_sock on the clcsock (TCP listening socket). It reads sk_user_data to get the smc_sock pointer. However, when the SMC listen socket is being closed concurrently, smc_close_active() sets clcsock->sk_user_data to NULL under sk_callback_lock, and then the smc_sock itself can be freed via sock_put() in smc_release(). This leads to two issues: 1) NULL pointer dereference: sk_user_data is NULL when accessed. 2) Use-after-free: sk_user_data is read as non-NULL, but the smc_sock is freed before its fields (e.g., queued_smc_hs, ori_af_ops) are accessed. The race window looks like this (the syzkaller crash [1] triggers via the SYN cookie path: tcp_get_cookie_sock() -> smc_tcp_syn_recv_sock(), but the normal tcp_check_req() path has the same race): CPU A (softirq) CPU B (process ctx) tcp_v4_rcv() TCP_NEW_SYN_RECV: sk = req->rsk_listener sock_hold(sk) /* No lock on listener */ smc_close_active(): write_lock_bh(cb_lock) sk_user_data = NULL write_unlock_bh(cb_lock) ... smc_clcsock_release() sock_put(smc->sk) x2 -> smc_sock freed! tcp_check_req() smc_tcp_syn_recv_sock(): smc = user_data(sk) -> NULL or dangling smc->queued_smc_hs -> crash! Note that the clcsock and smc_sock are two independent objects with separate refcounts. TCP stack holds a reference on the clcsock, which keeps it alive, but this does NOT prevent the smc_sock from being freed. Fix this by using RCU and refcount_inc_not_zero() to safely access smc_sock. Since smc_tcp_syn_recv_sock() is called in the TCP three-way handshake path, taking read_lock_bh on sk_callback_lock is too heavy and would not survive a SYN flood attack. Using rcu_read_lock() is much more lightweight. - Set SOCK_RCU_FREE on the SMC listen socket so that smc_sock freeing is deferred until after the RCU grace period. This guarantees the memory is still valid when accessed inside rcu_read_lock(). - Use rcu_read_lock() to protect reading sk_user_data. - Use refcount_inc_not_zero(&smc->sk.sk_refcnt) to pin the smc_sock. If the refcount has already reached zero (close path completed), it returns false and we bail out safely. Note: smc_hs_congested() has a similar lockless read of sk_user_data without rcu_read_lock(), but it only checks for NULL and accesses the global smc_hs_wq, never dereferencing any smc_sock field, so it is not affected. Reproducer was verified with mdelay injection and smc_run, the issue no longer occurs with this patch applied. [1] https://syzkaller.appspot.com/bug?extid=827ae2bfb3a3529333e9 Fixes: 8270d9c21041 ("net/smc: Limit backlog connections") Reported-by: syzbot+827ae2bfb3a3529333e9@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/67eaf9b8.050a0220.3c3d88.004a.GAE@google.com/T/ Suggested-by: Eric Dumazet Reviewed-by: Eric Dumazet Signed-off-by: Jiayuan Chen Link: https://patch.msgid.link/20260312092909.48325-1-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net/smc: fix mismatch between CLC header and proposal

2025-12-06T21:12:32+00:00

[ Upstream commit ec33f2e5a2d0dbbfd71435209aee812fdc9369b8 ] The current CLC proposal message construction uses a mix of `ini->smc_type_v1/v2` and `pclc_base->hdr.typev1/v2` to decide whether to include optional extensions (IPv6 prefix extension for v1, and v2 extension). This leads to a critical inconsistency: when `smc_clc_prfx_set()` fails - for example, in IPv6-only environments with only link-local addresses, or when the local IP address and the outgoing interface’s network address are not in the same subnet. As a result, the proposal message is assembled using the stale `ini->smc_type_v1` value—causing the IPv6 prefix extension to be included even though the header indicates v1 is not supported. The peer then receives a malformed CLC proposal where the header type does not match the payload, and immediately resets the connection. The fix ensures consistency between the CLC header flags and the actual payload by synchronizing `ini->smc_type_v1` with `pclc_base->hdr.typev1` when prefix setup fails. Fixes: 8c3dca341aea ("net/smc: build and send V2 CLC proposal") Signed-off-by: D. Wythe Reviewed-by: Alexandra Winter Link: https://patch.msgid.link/20251107024029.88753-1-alibuda@linux.alibaba.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net/smc: Remove validation of reserved bits in CLC Decline message

2025-09-09T16:54:15+00:00

[ Upstream commit cc282f73bc0cbdf3ee7af2f2d3a2ef4e6b19242d ] Currently SMC code is validating the reserved bits while parsing the incoming CLC decline message & when this validation fails, its treated as a protocol error. As a result, the SMC connection is terminated instead of falling back to TCP. As per RFC7609[1] specs we shouldn't be validating the reserved bits that is part of CLC message. This patch fixes this issue. CLC Decline message format can viewed here[2]. [1] https://datatracker.ietf.org/doc/html/rfc7609#page-92 [2] https://datatracker.ietf.org/doc/html/rfc7609#page-105 Fixes: 8ade200c269f ("net/smc: add v2 format of CLC decline message") Signed-off-by: Mahanta Jambigi Reviewed-by: Sidraya Jayagond Reviewed-by: Alexandra Winter Reviewed-by: Dust Li Link: https://patch.msgid.link/20250902082041.98996-1-mjambigi@linux.ibm.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net/smc: fix one NULL pointer dereference in smc_ib_is_sg_need_sync()

2025-09-09T16:54:14+00:00

[ Upstream commit ba1e9421cf1a8369d25c3832439702a015d6b5f9 ] BUG: kernel NULL pointer dereference, address: 00000000000002ec PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 28 UID: 0 PID: 343 Comm: kworker/28:1 Kdump: loaded Tainted: G OE 6.17.0-rc2+ #9 NONE Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Workqueue: smc_hs_wq smc_listen_work [smc] RIP: 0010:smc_ib_is_sg_need_sync+0x9e/0xd0 [smc] ... Call Trace: smcr_buf_map_link+0x211/0x2a0 [smc] __smc_buf_create+0x522/0x970 [smc] smc_buf_create+0x3a/0x110 [smc] smc_find_rdma_v2_device_serv+0x18f/0x240 [smc] ? smc_vlan_by_tcpsk+0x7e/0xe0 [smc] smc_listen_find_device+0x1dd/0x2b0 [smc] smc_listen_work+0x30f/0x580 [smc] process_one_work+0x18c/0x340 worker_thread+0x242/0x360 kthread+0xe7/0x220 ret_from_fork+0x13a/0x160 ret_from_fork_asm+0x1a/0x30 If the software RoCE device is used, ibdev->dma_device is a null pointer. As a result, the problem occurs. Null pointer detection is added to prevent problems. Fixes: 0ef69e788411c ("net/smc: optimize for smc_sndbuf_sync_sg_for_device and smc_rmb_sync_sg_for_cpu") Signed-off-by: Liu Jian Reviewed-by: Guangguan Wang Reviewed-by: Zhu Yanjun Reviewed-by: D. Wythe Link: https://patch.msgid.link/20250828124117.2622624-1-liujian56@huawei.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net/smc: use the correct ndev to find pnetid by pnetid table

2025-06-04T12:40:06+00:00

[ Upstream commit bfc6c67ec2d64d0ca4e5cc3e1ac84298a10b8d62 ] When using smc_pnet in SMC, it will only search the pnetid in the base_ndev of the netdev hierarchy(both HW PNETID and User-defined sw pnetid). This may not work for some scenarios when using SMC in container on cloud environment. In container, there have choices of different container network, such as directly using host network, virtual network IPVLAN, veth, etc. Different choices of container network have different netdev hierarchy. Examples of netdev hierarchy show below. (eth0 and eth1 in host below is the netdev directly related to the physical device). _______________________________ | _________________ | | |POD | | | | | | | | eth0_________ | | | |____| |__| | | | | | | | | | | eth1|base_ndev| eth0_______ | | | | | RDMA || | host |_________| |_______|| --------------------------------- netdev hierarchy if directly using host network ________________________________ | _________________ | | |POD __________ | | | | |upper_ndev| | | | |eth0|__________| | | | |_______|_________| | | |lower netdev | | __|______ | | eth1| | eth0_______ | | |base_ndev| | RDMA || | host |_________| |_______|| --------------------------------- netdev hierarchy if using IPVLAN _______________________________ | _____________________ | | |POD _________ | | | | |base_ndev|| | | |eth0(veth)|_________|| | | |____________|________| | | |pairs | | _______|_ | | | | eth0_______ | | veth|base_ndev| | RDMA || | |_________| |_______|| | _________ | | eth1|base_ndev| | | host |_________| | --------------------------------- netdev hierarchy if using veth Due to some reasons, the eth1 in host is not RDMA attached netdevice, pnetid is needed to map the eth1(in host) with RDMA device so that POD can do SMC-R. Because the eth1(in host) is managed by CNI plugin(such as Terway, network management plugin in container environment), and in cloud environment the eth(in host) can dynamically be inserted by CNI when POD create and dynamically be removed by CNI when POD destroy and no POD related to the eth(in host) anymore. It is hard to config the pnetid to the eth1(in host). But it is easy to config the pnetid to the netdevice which can be seen in POD. When do SMC-R, both the container directly using host network and the container using veth network can successfully match the RDMA device, because the configured pnetid netdev is a base_ndev. But the container using IPVLAN can not successfully match the RDMA device and 0x03030000 fallback happens, because the configured pnetid netdev is not a base_ndev. Additionally, if config pnetid to the eth1(in host) also can not work for matching RDMA device when using veth network and doing SMC-R in POD. To resolve the problems list above, this patch extends to search user -defined sw pnetid in the clc handshake ndev when no pnetid can be found in the base_ndev, and the base_ndev take precedence over ndev for backward compatibility. This patch also can unify the pnetid setup of different network choices list above in container(Config user-defined sw pnetid in the netdevice can be seen in POD). Signed-off-by: Guangguan Wang Reviewed-by: Wenjia Zhang Reviewed-by: Halil Pasic Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net/smc: fix data error when recvmsg with MSG_PEEK flag

2025-02-21T12:49:03+00:00

[ Upstream commit a4b6539038c1aa1ae871aacf6e41b566c3613993 ] When recvmsg with MSG_PEEK flag, the data will be copied to user's buffer without advancing consume cursor and without reducing the length of rx available data. Once the expected peek length is larger than the value of bytes_to_rcv, in the loop of do while in smc_rx_recvmsg, the first loop will copy bytes_to_rcv bytes of data from the position local_tx_ctrl.cons, the second loop will copy the min(bytes_to_rcv, read_remaining) bytes from the position local_tx_ctrl.cons again because of the lacking of process with advancing consume cursor and reducing the length of available data. So do the subsequent loops. The data copied in the second loop and the subsequent loops will result in data error, as it should not be copied if no more data arrives and it should be copied from the position advancing bytes_to_rcv bytes from the local_tx_ctrl.cons if more data arrives. This issue can be reproduce by the following python script: server.py: import socket import time server_ip = '0.0.0.0' server_port = 12346 server_socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM) server_socket.bind((server_ip, server_port)) server_socket.listen(1) print('Server is running and listening for connections...') conn, addr = server_socket.accept() print('Connected by', addr) while True: data = conn.recv(1024) if not data: break print('Received request:', data.decode()) conn.sendall(b'Hello, client!\n') time.sleep(5) conn.sendall(b'Hello, again!\n') conn.close() client.py: import socket server_ip = '' server_port = 12346 resp=b'Hello, client!\nHello, again!\n' client_socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM) client_socket.connect((server_ip, server_port)) request = 'Hello, server!' client_socket.sendall(request.encode()) peek_data = client_socket.recv(len(resp), socket.MSG_PEEK | socket.MSG_WAITALL) print('Peeked data:', peek_data.decode()) client_socket.close() Fixes: 952310ccf2d8 ("smc: receive data from RMBE") Reported-by: D. Wythe Signed-off-by: Guangguan Wang Link: https://patch.msgid.link/20250104143201.35529-1-guangguan.wang@linux.alibaba.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin