kernel/linux.git/net/sctp/sysctl.c, branch v5.10.257

sctp: sysctl: rto_min/max: avoid using current->nsproxy

2025-02-01T17:22:26+00:00

[ Upstream commit 9fc17b76fc70763780aa78b38fcf4742384044a5 ] As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the 'net' structure, but that would increase the size of this fix, to use '*data' everywhere 'net->sctp.rto_min/max' is used. Fixes: 4f3fdf3bc59c ("sctp: add check rto_min and rto_max in sysctl") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1] Suggested-by: Al Viro Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-5-5df34b2083e8@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

sctp: sysctl: auth_enable: avoid using current->nsproxy

2025-02-01T17:22:20+00:00

commit 15649fd5415eda664ef35780c2013adeb5d9c695 upstream. As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, but that would increase the size of this fix, while 'sctp.ctl_sock' still needs to be retrieved from 'net' structure. Fixes: b14878ccb7fa ("net: sctp: cache auth_enable per endpoint") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1] Suggested-by: Al Viro Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-6-5df34b2083e8@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy

2025-02-01T17:22:20+00:00

commit ea62dd1383913b5999f3d16ae99d411f41b528d4 upstream. As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the 'net' structure, but that would increase the size of this fix, to use '*data' everywhere 'net->sctp.sctp_hmac_alg' is used. Fixes: 3c68198e7511 ("sctp: Make hmac algorithm selection for cookie generation dynamic") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1] Suggested-by: Al Viro Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-4-5df34b2083e8@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

sctp: sysctl: make extra pointers netns aware

2023-01-14T09:15:44+00:00

[ Upstream commit da05cecc4939c0410d56c29e252998b192756318 ] Recently, a customer reported that from their container whose net namespace is different to the host's init_net, they can't set the container's net.sctp.rto_max to any value smaller than init_net.sctp.rto_min. For instance, Host: sudo sysctl net.sctp.rto_min net.sctp.rto_min = 1000 Container: echo 100 > /mnt/proc-net/sctp/rto_min echo 400 > /mnt/proc-net/sctp/rto_max echo: write error: Invalid argument This is caused by the check made from this'commit 4f3fdf3bc59c ("sctp: add check rto_min and rto_max in sysctl")' When validating the input value, it's always referring the boundary value set for the init_net namespace. Having container's rto_max smaller than host's init_net.sctp.rto_min does make sense. Consider that the rto between two containers on the same host is very likely smaller than it for two hosts. So to fix this problem, as suggested by Marcelo, this patch makes the extra pointers of rto_min, rto_max, pf_retrans, and ps_retrans point to the corresponding variables from the newly created net namespace while the new net namespace is being registered in sctp_sysctl_net_register. Fixes: 4f3fdf3bc59c ("sctp: add check rto_min and rto_max in sysctl") Reviewed-by: Marcelo Ricardo Leitner Reviewed-by: Jakub Kicinski Acked-by: Marcelo Ricardo Leitner Signed-off-by: Firo Yang Link: https://lore.kernel.org/r/20221209054854.23889-1-firo.yang@suse.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

sysctl: pass kernel pointers to ->proc_handler

2020-04-27T06:07:40+00:00

Instead of having all the sysctl handlers deal with user pointers, which is rather hairy in terms of the BPF interaction, copy the input to and from userspace in common code. This also means that the strings are always NUL-terminated by the common code, making the API a little bit safer. As most handler just pass through the data to one of the common handlers a lot of the changes are mechnical. Signed-off-by: Christoph Hellwig Acked-by: Andrey Ignatov Signed-off-by: Al Viro

sctp: add support for Primary Path Switchover

2019-11-08T22:18:32+00:00

This is a new feature defined in section 5 of rfc7829: "Primary Path Switchover". By introducing a new tunable parameter: Primary.Switchover.Max.Retrans (PSMR) The primary path will be changed to another active path when the path error counter on the old primary path exceeds PSMR, so that "the SCTP sender is allowed to continue data transmission on a new working path even when the old primary destination address becomes active again". This patch is to add this tunable parameter, 'ps_retrans' per netns, sock, asoc and transport. It also allows a user to change ps_retrans per netns by sysctl, and ps_retrans per sock/asoc/transport will be initialized with it. The check will be done in sctp_do_8_2_transport_strike() when this feature is enabled. Note this feature is disabled by initializing 'ps_retrans' per netns as 0xffff by default, and its value can't be less than 'pf_retrans' when changing by sysctl. v3->v4: - add define SCTP_PS_RETRANS_MAX 0xffff, and use it on extra2 of sysctl 'ps_retrans'. - add a new entry for ps_retrans on ip-sysctl.txt. Signed-off-by: Xin Long Acked-by: Neil Horman Signed-off-by: David S. Miller

sctp: add pf_expose per netns and sock and asoc

2019-11-08T22:18:32+00:00

As said in rfc7829, section 3, point 12: The SCTP stack SHOULD expose the PF state of its destination addresses to the ULP as well as provide the means to notify the ULP of state transitions of its destination addresses from active to PF, and vice versa. However, it is recommended that an SCTP stack implementing SCTP-PF also allows for the ULP to be kept ignorant of the PF state of its destinations and the associated state transitions, thus allowing for retention of the simpler state transition model of [RFC4960] in the ULP. Not only does it allow to expose the PF state to ULP, but also allow to ignore sctp-pf to ULP. So this patch is to add pf_expose per netns, sock and asoc. And in sctp_assoc_control_transport(), ulp_notify will be set to false if asoc->expose is not 'enabled' in next patch. It also allows a user to change pf_expose per netns by sysctl, and pf_expose per sock and asoc will be initialized with it. Note that pf_expose also works for SCTP_GET_PEER_ADDR_INFO sockopt, to not allow a user to query the state of a sctp-pf peer address when pf_expose is 'disabled', as said in section 7.3. v1->v2: - Fix a build warning noticed by Nathan Chancellor. v2->v3: - set pf_expose to UNUSED by default to keep compatible with old applications. v3->v4: - add a new entry for pf_expose on ip-sysctl.txt, as Marcelo suggested. - change this patch to 1/5, and move sctp_assoc_control_transport change into 2/5, as Marcelo suggested. - use SCTP_PF_EXPOSE_UNSET instead of SCTP_PF_EXPOSE_UNUSED, and set SCTP_PF_EXPOSE_UNSET to 0 in enum, as Marcelo suggested. Signed-off-by: Xin Long Acked-by: Neil Horman Signed-off-by: David S. Miller

sctp: allow users to set netns ecn flag with sysctl

2019-08-28T03:54:14+00:00

sysctl net.sctp.ecn_enable is added in this patch. It will allow users to change the default sctp ecn flag, net.sctp.ecn_enable. This feature was also required on this thread: http://lkml.iu.edu/hypermail/linux/kernel/0812.1/01858.html Signed-off-by: Xin Long Signed-off-by: David S. Miller

proc/sysctl: add shared variables for range check

2019-07-19T00:08:07+00:00

In the sysctl code the proc_dointvec_minmax() function is often used to validate the user supplied value between an allowed range. This function uses the extra1 and extra2 members from struct ctl_table as minimum and maximum allowed value. On sysctl handler declaration, in every source file there are some readonly variables containing just an integer which address is assigned to the extra1 and extra2 members, so the sysctl range is enforced. The special values 0, 1 and INT_MAX are very often used as range boundary, leading duplication of variables like zero=0, one=1, int_max=INT_MAX in different source files: $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l 248 Add a const int array containing the most commonly used values, some macros to refer more easily to the correct array member, and use them instead of creating a local one for every object file. This is the bloat-o-meter output comparing the old and new binary compiled with the default Fedora config: # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164) Data old new delta sysctl_vals - 12 +12 __kstrtab_sysctl_vals - 12 +12 max 14 10 -4 int_max 16 - -16 one 68 - -68 zero 128 28 -100 Total: Before=20583249, After=20583085, chg -0.00% [mcroce@redhat.com: tipc: remove two unused variables] Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com [akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c] [arnd@arndb.de: proc/sysctl: make firmware loader table conditional] Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de [akpm@linux-foundation.org: fix fs/eventpoll.c] Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com Signed-off-by: Matteo Croce Signed-off-by: Arnd Bergmann Acked-by: Kees Cook Reviewed-by: Aaron Tomlin Cc: Matthew Wilcox Cc: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 104

2019-05-24T15:39:00+00:00

Based on 1 normalized pattern(s): this sctp implementation is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version this sctp implementation is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with gnu cc see the file copying if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 42 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Kate Stewart Reviewed-by: Richard Fontana Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190523091649.683323110@linutronix.de Signed-off-by: Greg Kroah-Hartman