kernel/linux.git/net/sched/act_sample.c, branch v6.6.131

net/sched: act_sample: fix action bind logic

2023-02-26T18:27:45+00:00

The TC architecture allows filters and actions to be created independently. In filters the user can reference action objects using: tc action add action sample ... index 1 tc filter add ... action pedit index 1 In the current code for act_sample this is broken as it checks netlink attributes for create/update before actually checking if we are binding to an existing action. tdc results: 1..29 ok 1 9784 - Add valid sample action with mandatory arguments ok 2 5c91 - Add valid sample action with mandatory arguments and continue control action ok 3 334b - Add valid sample action with mandatory arguments and drop control action ok 4 da69 - Add valid sample action with mandatory arguments and reclassify control action ok 5 13ce - Add valid sample action with mandatory arguments and pipe control action ok 6 1886 - Add valid sample action with mandatory arguments and jump control action ok 7 7571 - Add sample action with invalid rate ok 8 b6d4 - Add sample action with mandatory arguments and invalid control action ok 9 a874 - Add invalid sample action without mandatory arguments ok 10 ac01 - Add invalid sample action without mandatory argument rate ok 11 4203 - Add invalid sample action without mandatory argument group ok 12 14a7 - Add invalid sample action without mandatory argument group ok 13 8f2e - Add valid sample action with trunc argument ok 14 45f8 - Add sample action with maximum rate argument ok 15 ad0c - Add sample action with maximum trunc argument ok 16 83a9 - Add sample action with maximum group argument ok 17 ed27 - Add sample action with invalid rate argument ok 18 2eae - Add sample action with invalid group argument ok 19 6ff3 - Add sample action with invalid trunc size ok 20 2b2a - Add sample action with invalid index ok 21 dee2 - Add sample action with maximum allowed index ok 22 560e - Add sample action with cookie ok 23 704a - Replace existing sample action with new rate argument ok 24 60eb - Replace existing sample action with new group argument ok 25 2cce - Replace existing sample action with new trunc argument ok 26 59d1 - Replace existing sample action with new control argument ok 27 0a6e - Replace sample action with invalid goto chain control ok 28 3872 - Delete sample action with valid index ok 29 a394 - Delete sample action with invalid index Fixes: 5c5670fae430 ("net/sched: Introduce sample tc action") Reviewed-by: Jamal Hadi Salim Signed-off-by: Pedro Tammela Reviewed-by: Simon Horman Signed-off-by: David S. Miller

Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2022-12-13T23:47:48+00:00

Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...

net/sched: avoid indirect act functions on retpoline kernels

2022-12-09T09:18:07+00:00

Expose the necessary tc act functions and wire up act_api to use direct calls in retpoline kernels. Signed-off-by: Pedro Tammela Reviewed-by: Jamal Hadi Salim Reviewed-by: Victor Nogueira Signed-off-by: David S. Miller

treewide: use get_random_u32_below() instead of deprecated function

2022-11-18T01:15:15+00:00

This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook Reviewed-by: Greg Kroah-Hartman Acked-by: Darrick J. Wong # for xfs Reviewed-by: SeongJae Park # for damon Reviewed-by: Jason Gunthorpe # for infiniband Reviewed-by: Russell King (Oracle) # for arm Acked-by: Ulf Hansson # for mmc Signed-off-by: Jason A. Donenfeld

treewide: use prandom_u32_max() when possible, part 1

2022-10-11T23:42:55+00:00

Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman Reviewed-by: Kees Cook Reviewed-by: Yury Norov Reviewed-by: KP Singh Reviewed-by: Jan Kara # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder # for drbd Acked-by: Jakub Kicinski Acked-by: Heiko Carstens # for s390 Acked-by: Ulf Hansson # for mmc Acked-by: Darrick J. Wong # for xfs Signed-off-by: Jason A. Donenfeld

net: sched: act_sample: get rid of tcf_sample_walker and tcf_sample_search

2022-09-09T07:24:42+00:00

tcf_sample_walker() and tcf_sample_search() do the same thing as generic walk/search function, so remove them. Signed-off-by: Zhengchao Shao Acked-by: Jamal Hadi Salim Signed-off-by: David S. Miller

net: sched: act: move global static variable net_id to tc_action_ops

2022-09-09T07:24:41+00:00

Each tc action module has a corresponding net_id, so put net_id directly into the structure tc_action_ops. Signed-off-by: Zhengchao Shao Acked-by: Jamal Hadi Salim Signed-off-by: David S. Miller

net/sched: act_api: Add extack to offload_act_setup() callback

2022-04-08T12:45:43+00:00

The callback is used by various actions to populate the flow action structure prior to offload. Pass extack to this callback so that the various actions will be able to report accurate error messages to user space. Signed-off-by: Ido Schimmel Reviewed-by: Petr Machata Signed-off-by: David S. Miller

flow_offload: allow user to offload tc action to net device

2021-12-19T14:08:48+00:00

Use flow_indr_dev_register/flow_indr_dev_setup_offload to offload tc action. We need to call tc_cleanup_flow_action to clean up tc action entry since in tc_setup_action, some actions may hold dev refcnt, especially the mirror action. Signed-off-by: Baowen Zheng Signed-off-by: Louis Peens Signed-off-by: Simon Horman Signed-off-by: David S. Miller

flow_offload: add ops to tc_action_ops for flow action setup

2021-12-19T14:08:48+00:00

Add a new ops to tc_action_ops for flow action setup. Refactor function tc_setup_flow_action to use this new ops. We make this change to facilitate to add standalone action module. We will also use this ops to offload action independent of filter in following patch. Signed-off-by: Baowen Zheng Signed-off-by: Simon Horman Signed-off-by: David S. Miller