kernel/linux.git/net/rxrpc/input.c, branch v5.10.257

rxrpc: Use refcount_t rather than atomic_t

2022-12-02T16:39:59+00:00

[ Upstream commit a05754295e01f006a651eec759c5dbe682ef6cef ] Move to using refcount_t rather than atomic_t for refcounts in rxrpc. Signed-off-by: David Howells cc: Marc Dionne cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller Stable-dep-of: 3bcd6c7eaa53 ("rxrpc: Fix race between conn bundle lookup and bundle removal [ZDI-CAN-15975]") Signed-off-by: Sasha Levin

rxrpc: Fix decision on when to generate an IDLE ACK

2022-06-09T08:21:12+00:00

[ Upstream commit 9a3dedcf18096e8f7f22b8777d78c4acfdea1651 ] Fix the decision on when to generate an IDLE ACK by keeping a count of the number of packets we've received, but not yet soft-ACK'd, and the number of packets we've processed, but not yet hard-ACK'd, rather than trying to keep track of which DATA sequence numbers correspond to those points. We then generate an ACK when either counter exceeds 2. The counters are both cleared when we transcribe the information into any sort of ACK packet for transmission. IDLE and DELAY ACKs are skipped if both counters are 0 (ie. no change). Fixes: 805b21b929e2 ("rxrpc: Send an ACK after every few DATA packets we receive") Signed-off-by: David Howells cc: Marc Dionne cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

rxrpc: Don't let ack.previousPacket regress

2022-06-09T08:21:12+00:00

[ Upstream commit 81524b6312535897707f2942695da1d359a5e56b ] The previousPacket field in the rx ACK packet should never go backwards - it's now the highest DATA sequence number received, not the last on received (it used to be used for out of sequence detection). Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Signed-off-by: David Howells cc: Marc Dionne cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

rxrpc: Fix overlapping ACK accounting

2022-06-09T08:21:12+00:00

[ Upstream commit 8940ba3cfe4841928777fd45eaa92051522c7f0c ] Fix accidental overlapping of Rx-phase ACK accounting with Tx-phase ACK accounting through variables shared between the two. call->acks_* members refer to ACKs received in the Tx phase and call->ackr_* members to ACKs sent/to be sent during the Rx phase. Fixes: 1a2391c30c0b ("rxrpc: Fix detection of out of order acks") Signed-off-by: David Howells cc: Jeffrey Altman cc: Marc Dionne cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

rxrpc: Call state should be read with READ_ONCE() under some circumstances

2021-01-23T15:04:01+00:00

[ Upstream commit a95d25dd7b94a5ba18246da09b4218f132fed60e ] The call state may be changed at any time by the data-ready routine in response to received packets, so if the call state is to be read and acted upon several times in a function, READ_ONCE() must be used unless the call state lock is held. As it happens, we used READ_ONCE() to read the state a few lines above the unmarked read in rxrpc_input_data(), so use that value rather than re-reading it. Fixes: a158bdd3247b ("rxrpc: Fix call timeouts") Signed-off-by: Baptiste Lepers Signed-off-by: David Howells Link: https://lore.kernel.org/r/161046715522.2450566.488819910256264150.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-09-04T01:50:48+00:00

Pull networking fixes from David Miller: 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi Kivilinna. 2) Fix loss of RTT samples in rxrpc, from David Howells. 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu. 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka. 5) We disable BH for too lokng in sctp_get_port_local(), add a cond_resched() here as well, from Xin Long. 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu. 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from Yonghong Song. 8) Missing of_node_put() in mt7530 DSA driver, from Sumera Priyadarsini. 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan. 10) Fix geneve tunnel checksumming bug in hns3, from Yi Li. 11) Memory leak in rxkad_verify_response, from Dinghao Liu. 12) In tipc, don't use smp_processor_id() in preemptible context. From Tuong Lien. 13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu. 14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter. 15) Fix ABI mismatch between driver and firmware in nfp, from Louis Peens. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits) net/smc: fix sock refcounting in case of termination net/smc: reset sndbuf_desc if freed net/smc: set rx_off for SMCR explicitly net/smc: fix toleration of fake add_link messages tg3: Fix soft lockup when tg3_reset_task() fails. doc: net: dsa: Fix typo in config code sample net: dp83867: Fix WoL SecureOn password nfp: flower: fix ABI mismatch between driver and firmware tipc: fix shutdown() of connectionless socket ipv6: Fix sysctl max for fib_multipath_hash_policy drivers/net/wan/hdlc: Change the default of hard_header_len to 0 net: gemini: Fix another missing clk_disable_unprepare() in probe net: bcmgenet: fix mask check in bcmgenet_validate_flow() amd-xgbe: Add support for new port mode net: usb: dm9601: Add USB ID of Keenetic Plus DSL vhost: fix typo in error message net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init() pktgen: fix error message with wrong function name net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode cxgb4: fix thermal zone device registration ...

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59+00:00

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva

rxrpc: Fix loss of RTT samples due to interposed ACK

2020-08-20T16:59:27+00:00

The Rx protocol has a mechanism to help generate RTT samples that works by a client transmitting a REQUESTED-type ACK when it receives a DATA packet that has the REQUEST_ACK flag set. The peer, however, may interpose other ACKs before transmitting the REQUESTED-ACK, as can be seen in the following trace excerpt: rxrpc_tx_data: c=00000044 DATA d0b5ece8:00000001 00000001 q=00000001 fl=07 rxrpc_rx_ack: c=00000044 00000001 PNG r=00000000 f=00000002 p=00000000 n=0 rxrpc_rx_ack: c=00000044 00000002 REQ r=00000001 f=00000002 p=00000001 n=0 ... DATA packet 1 (q=xx) has REQUEST_ACK set (bit 1 of fl=xx). The incoming ping (labelled PNG) hard-acks the request DATA packet (f=xx exceeds the sequence number of the DATA packet), causing it to be discarded from the Tx ring. The ACK that was requested (labelled REQ, r=xx references the serial of the DATA packet) comes after the ping, but the sk_buff holding the timestamp has gone and the RTT sample is lost. This is particularly noticeable on RPC calls used to probe the service offered by the peer. A lot of peers end up with an unknown RTT because we only ever sent a single RPC. This confuses the server rotation algorithm. Fix this by caching the information about the outgoing packet in RTT calculations in the rxrpc_call struct rather than looking in the Tx ring. A four-deep buffer is maintained and both REQUEST_ACK-flagged DATA and PING-ACK transmissions are recorded in there. When the appropriate response ACK is received, the buffer is checked for a match and, if found, an RTT sample is recorded. If a received ACK refers to a packet with a later serial number than an entry in the cache, that entry is presumed lost and the entry is made available to record a new transmission. ACKs types other than REQUESTED-type and PING-type cause any matching sample to be cancelled as they don't necessarily represent a useful measurement. If there's no space in the buffer on ping/data transmission, the sample base is discarded. Fixes: 50235c4b5a2f ("rxrpc: Obtain RTT data by requesting ACKs on DATA packets") Signed-off-by: David Howells

rxrpc: Keep the ACK serial in a var in rxrpc_input_ack()

2020-08-20T15:52:23+00:00

Keep the ACK serial number in a variable in rxrpc_input_ack() as it's used frequently. Signed-off-by: David Howells

rxrpc: Fix handling of rwind from an ACK packet

2020-06-17T22:01:32+00:00

The handling of the receive window size (rwind) from a received ACK packet is not correct. The rxrpc_input_ackinfo() function currently checks the current Tx window size against the rwind from the ACK to see if it has changed, but then limits the rwind size before storing it in the tx_winsize member and, if it increased, wake up the transmitting process. This means that if rwind > RXRPC_RXTX_BUFF_SIZE - 1, this path will always be followed. Fix this by limiting rwind before we compare it to tx_winsize. The effect of this can be seen by enabling the rxrpc_rx_rwind_change tracepoint. Fixes: 702f2ac87a9a ("rxrpc: Wake up the transmitter if Rx window size increases on the peer") Signed-off-by: David Howells