kernel/linux.git/net/rxrpc/call_object.c, branch v6.12.80

rxrpc: Fix call state set to not include the SERVER_SECURING state

2025-02-17T09:05:02+00:00

[ Upstream commit 41b996ce83bf944de5569d6263c8dbd5513e7ed0 ] The RXRPC_CALL_SERVER_SECURING state doesn't really belong with the other states in the call's state set as the other states govern the call's Rx/Tx phase transition and govern when packets can and can't be received or transmitted. The "Securing" state doesn't actually govern the reception of packets and would need to be split depending on whether or not we've received the last packet yet (to mirror RECV_REQUEST/ACK_REQUEST). The "Securing" state is more about whether or not we can start forwarding packets to the application as recvmsg will need to decode them and the decoding can't take place until the challenge/response exchange has completed. Fix this by removing the RXRPC_CALL_SERVER_SECURING state from the state set and, instead, using a flag, RXRPC_CALL_CONN_CHALLENGING, to track whether or not we can queue the call for reception by recvmsg() or notify the kernel app that data is ready. In the event that we've already received all the packets, the connection event handler will poke the app layer in the appropriate manner. Also there's a race whereby the app layer sees the last packet before rxrpc has managed to end the rx phase and change the state to one amenable to allowing a reply. Fix this by queuing the packet after calling rxrpc_end_rx_phase(). Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells cc: Marc Dionne cc: Simon Horman cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20250204230558.712536-2-dhowells@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

rxrpc: Fix congestion control algorithm

2024-05-08T15:05:03+00:00

Make the following fixes to the congestion control algorithm: (1) Don't vary the cwnd starting value by the size of RXRPC_TX_SMSS since that's currently held constant - set to the size of a jumbo subpacket payload so that we can create jumbo packets on the fly. The current code invariably picks 3 as the starting value. Further, the starting cwnd needs to be an even number because we ack every other packet, so set it to 4. (2) Don't cut ssthresh when we see an ACK come from the peer with a receive window (rwind) less than ssthresh. ssthresh keeps track of characteristics of the connection whereas rwind may be reduced by the peer for any reason - and may be reduced to 0. Fixes: 1fc4fa2ac93d ("rxrpc: Fix congestion management") Fixes: 0851115090a3 ("rxrpc: Reduce ssthresh to peer's receive window") Signed-off-by: David Howells Suggested-by: Simon Wilkinson cc: Marc Dionne cc: linux-afs@lists.infradead.org Reviewed-by: Jeffrey Altman > Link: https://lore.kernel.org/r/20240503150749.1001323-2-dhowells@redhat.com Signed-off-by: Jakub Kicinski

rxrpc: Use ktimes for call timeout tracking and set the timer lazily

2024-03-05T23:35:25+00:00

Track the call timeouts as ktimes rather than jiffies as the latter's granularity is too high and only set the timer at the end of the event handling function. Signed-off-by: David Howells cc: Marc Dionne cc: "David S. Miller" cc: Eric Dumazet cc: Jakub Kicinski cc: Paolo Abeni cc: linux-afs@lists.infradead.org cc: netdev@vger.kernel.org

rxrpc: Fix counting of new acks and nacks

2024-02-05T12:34:07+00:00

Fix the counting of new acks and nacks when parsing a packet - something that is used in congestion control. As the code stands, it merely notes if there are any nacks whereas what we really should do is compare the previous SACK table to the new one, assuming we get two successive ACK packets with nacks in them. However, we really don't want to do that if we can avoid it as the tables might not correspond directly as one may be shifted from the other - something that will only get harder to deal with once extended ACK tables come into full use (with a capacity of up to 8192). Instead, count the number of nacks shifted out of the old SACK, the number of nacks retained in the portion still active and the number of new acks and nacks in the new table then calculate what we need. Note this ends up a bit of an estimate as the Rx protocol allows acks to be withdrawn by the receiver and packets requested to be retransmitted. Fixes: d57a3a151660 ("rxrpc: Save last ACK's SACK table rather than marking txbufs") Signed-off-by: David Howells cc: Marc Dionne cc: "David S. Miller" cc: Eric Dumazet cc: Jakub Kicinski cc: Paolo Abeni cc: linux-afs@lists.infradead.org cc: netdev@vger.kernel.org Signed-off-by: David S. Miller

Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2024-01-11T18:07:29+00:00

Pull networking updates from Paolo Abeni: "The most interesting thing is probably the networking structs reorganization and a significant amount of changes is around self-tests. Core & protocols: - Analyze and reorganize core networking structs (socks, netdev, netns, mibs) to optimize cacheline consumption and set up build time warnings to safeguard against future header changes This improves TCP performances with many concurrent connections up to 40% - Add page-pool netlink-based introspection, exposing the memory usage and recycling stats. This helps indentify bad PP users and possible leaks - Refine TCP/DCCP source port selection to no longer favor even source port at connect() time when IP_LOCAL_PORT_RANGE is set. This lowers the time taken by connect() for hosts having many active connections to the same destination - Refactor the TCP bind conflict code, shrinking related socket structs - Refactor TCP SYN-Cookie handling, as a preparation step to allow arbitrary SYN-Cookie processing via eBPF - Tune optmem_max for 0-copy usage, increasing the default value to 128KB and namespecifying it - Allow coalescing for cloned skbs coming from page pools, improving RX performances with some common configurations - Reduce extension header parsing overhead at GRO time - Add bridge MDB bulk deletion support, allowing user-space to request the deletion of matching entries - Reorder nftables struct members, to keep data accessed by the datapath first - Introduce TC block ports tracking and use. This allows supporting multicast-like behavior at the TC layer - Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and classifiers (RSVP and tcindex) - More data-race annotations - Extend the diag interface to dump TCP bound-only sockets - Conditional notification of events for TC qdisc class and actions - Support for WPAN dynamic associations with nearby devices, to form a sub-network using a specific PAN ID - Implement SMCv2.1 virtual ISM device support - Add support for Batman-avd mulicast packet type BPF: - Tons of verifier improvements: - BPF register bounds logic and range support along with a large test suite - log improvements - complete precision tracking support for register spills - track aligned STACK_ZERO cases as imprecise spilled registers. This improves the verifier "instructions processed" metric from single digit to 50-60% for some programs - support for user's global BPF subprogram arguments with few commonly requested annotations for a better developer experience - support tracking of BPF_JNE which helps cases when the compiler transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like - several fixes - Add initial TX metadata implementation for AF_XDP with support in mlx5 and stmmac drivers. Two types of offloads are supported right now, that is, TX timestamp and TX checksum offload - Fix kCFI bugs in BPF all forms of indirect calls from BPF into kernel and from kernel into BPF work with CFI enabled. This allows BPF to work with CONFIG_FINEIBT=y - Change BPF verifier logic to validate global subprograms lazily instead of unconditionally before the main program, so they can be guarded using BPF CO-RE techniques - Support uid/gid options when mounting bpffs - Add a new kfunc which acquires the associated cgroup of a task within a specific cgroup v1 hierarchy where the latter is identified by its id - Extend verifier to allow bpf_refcount_acquire() of a map value field obtained via direct load which is a use-case needed in sched_ext - Add BPF link_info support for uprobe multi link along with bpftool integration for the latter - Support for VLAN tag in XDP hints - Remove deprecated bpfilter kernel leftovers given the project is developed in user-space (https://github.com/facebook/bpfilter) Misc: - Support for parellel TC self-tests execution - Increase MPTCP self-tests coverage - Updated the bridge documentation, including several so-far undocumented features - Convert all the net self-tests to run in unique netns, to avoid random failures due to conflict and allow concurrent runs - Add TCP-AO self-tests - Add kunit tests for both cfg80211 and mac80211 - Autogenerate Netlink families documentation from YAML spec - Add yml-gen support for fixed headers and recursive nests, the tool can now generate user-space code for all genetlink families for which we have specs - A bunch of additional module descriptions fixes - Catch incorrect freeing of pages belonging to a page pool Driver API: - Rust abstractions for network PHY drivers; do not cover yet the full C API, but already allow implementing functional PHY drivers in rust - Introduce queue and NAPI support in the netdev Netlink interface, allowing complete access to the device <> NAPIs <> queues relationship - Introduce notifications filtering for devlink to allow control application scale to thousands of instances - Improve PHY validation, requesting rate matching information for each ethtool link mode supported by both the PHY and host - Add support for ethtool symmetric-xor RSS hash - ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD platform - Expose pin fractional frequency offset value over new DPLL generic netlink attribute - Convert older drivers to platform remove callback returning void - Add support for PHY package MMD read/write New hardware / drivers: - Ethernet: - Octeon CN10K devices - Broadcom 5760X P7 - Qualcomm SM8550 SoC - Texas Instrument DP83TG720S PHY - Bluetooth: - IMC Networks Bluetooth radio Removed: - WiFi: - libertas 16-bit PCMCIA support - Atmel at76c50x drivers - HostAP ISA/PCMCIA style 802.11b driver - zd1201 802.11b USB dongles - Orinoco ISA/PCMCIA 802.11b driver - Aviator/Raytheon driver - Planet WL3501 driver - RNDIS USB 802.11b driver Driver updates: - Ethernet high-speed NICs: - Intel (100G, ice, idpf): - allow one by one port representors creation and removal - add temperature and clock information reporting - add get/set for ethtool's header split ringparam - add again FW logging - adds support switchdev hardware packet mirroring - iavf: implement symmetric-xor RSS hash - igc: add support for concurrent physical and free-running timers - i40e: increase the allowable descriptors - nVidia/Mellanox: - Preparation for Socket-Direct multi-dev netdev. That will allow in future releases combining multiple PFs devices attached to different NUMA nodes under the same netdev - Broadcom (bnxt): - TX completion handling improvements - add basic ntuple filter support - reduce MSIX vectors usage for MQPRIO offload - add VXLAN support, USO offload and TX coalesce completion for P7 - Marvell Octeon EP: - xmit-more support - add PF-VF mailbox support and use it for FW notifications for VFs - Wangxun (ngbe/txgbe): - implement ethtool functions to operate pause param, ring param, coalesce channel number and msglevel - Netronome/Corigine (nfp): - add flow-steering support - support UDP segmentation offload - Ethernet NICs embedded, slower, virtual: - Xilinx AXI: remove duplicate DMA code adopting the dma engine driver - stmmac: add support for HW-accelerated VLAN stripping - TI AM654x sw: add mqprio, frame preemption & coalescing - gve: add support for non-4k page sizes. - virtio-net: support dynamic coalescing moderation - nVidia/Mellanox Ethernet datacenter switches: - allow firmware upgrade without a reboot - more flexible support for bridge flooding via the compressed FID flooding mode - Ethernet embedded switches: - Microchip: - fine-tune flow control and speed configurations in KSZ8xxx - KSZ88X3: enable setting rmii reference - Renesas: - add jumbo frames support - Marvell: - 88E6xxx: add "eth-mac" and "rmon" stats support - Ethernet PHYs: - aquantia: add firmware load support - at803x: refactor the driver to simplify adding support for more chip variants - NXP C45 TJA11xx: Add MACsec offload support - Wifi: - MediaTek (mt76): - NVMEM EEPROM improvements - mt7996 Extremely High Throughput (EHT) improvements - mt7996 Wireless Ethernet Dispatcher (WED) support - mt7996 36-bit DMA support - Qualcomm (ath12k): - support for a single MSI vector - WCN7850: support AP mode - Intel (iwlwifi): - new debugfs file fw_dbg_clear - allow concurrent P2P operation on DFS channels - Bluetooth: - QCA2066: support HFP offload - ISO: more broadcast-related improvements - NXP: better recovery in case receiver/transmitter get out of sync" * tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits) lan78xx: remove redundant statement in lan78xx_get_eee lan743x: remove redundant statement in lan743x_ethtool_get_eee bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer() bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel() bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter() tcp: Revert no longer abort SYN_SENT when receiving some ICMP Revert "mlx5 updates 2023-12-20" Revert "net: stmmac: Enable Per DMA Channel interrupt" ipvlan: Remove usage of the deprecated ida_simple_xx() API ipvlan: Fix a typo in a comment net/sched: Remove ipt action tests net: stmmac: Use interrupt mode INTM=1 for per channel irq net: stmmac: Add support for TX/RX channel interrupt net: stmmac: Make MSI interrupt routine generic dt-bindings: net: snps,dwmac: per channel irq net: phy: at803x: make read_status more generic net: phy: at803x: add support for cdt cross short test for qca808x net: phy: at803x: refactor qca808x cable test get status function net: phy: at803x: generalize cdt fault length function net: ethernet: cortina: Drop TSO support ...

rxrpc: Fix skbuff cleanup of call's recvmsg_queue and rx_oos_queue

2024-01-07T15:25:30+00:00

Fix rxrpc_cleanup_ring() to use rxrpc_purge_queue() rather than skb_queue_purge() so that the count of outstanding skbuffs is correctly updated when a failed call is cleaned up. Without this rmmod may hang waiting for rxrpc_n_rx_skbs to become zero. Fixes: 5d7edbc9231e ("rxrpc: Get rid of the Rx ring") Reported-by: Marc Dionne Signed-off-by: David Howells cc: "David S. Miller" cc: Eric Dumazet cc: Jakub Kicinski cc: Paolo Abeni cc: linux-afs@lists.infradead.org cc: netdev@vger.kernel.org Signed-off-by: David S. Miller

rxrpc, afs: Allow afs to pin rxrpc_peer objects

2023-12-24T15:22:50+00:00

Change rxrpc's API such that: (1) A new function, rxrpc_kernel_lookup_peer(), is provided to look up an rxrpc_peer record for a remote address and a corresponding function, rxrpc_kernel_put_peer(), is provided to dispose of it again. (2) When setting up a call, the rxrpc_peer object used during a call is now passed in rather than being set up by rxrpc_connect_call(). For afs, this meenat passing it to rxrpc_kernel_begin_call() rather than the full address (the service ID then has to be passed in as a separate parameter). (3) A new function, rxrpc_kernel_remote_addr(), is added so that afs can get a pointer to the transport address for display purposed, and another, rxrpc_kernel_remote_srx(), to gain a pointer to the full rxrpc address. (4) The function to retrieve the RTT from a call, rxrpc_kernel_get_srtt(), is then altered to take a peer. This now returns the RTT or -1 if there are insufficient samples. (5) Rename rxrpc_kernel_get_peer() to rxrpc_kernel_call_get_peer(). (6) Provide a new function, rxrpc_kernel_get_peer(), to get a ref on a peer the caller already has. This allows the afs filesystem to pin the rxrpc_peer records that it is using, allowing faster lookups and pointer comparisons rather than comparing sockaddr_rxrpc contents. It also makes it easier to get hold of the RTT. The following changes are made to afs: (1) The addr_list struct's addrs[] elements now hold a peer struct pointer and a service ID rather than a sockaddr_rxrpc. (2) When displaying the transport address, rxrpc_kernel_remote_addr() is used. (3) The port arg is removed from afs_alloc_addrlist() since it's always overridden. (4) afs_merge_fs_addr4() and afs_merge_fs_addr6() do peer lookup and may now return an error that must be handled. (5) afs_find_server() now takes a peer pointer to specify the address. (6) afs_find_server(), afs_compare_fs_alists() and afs_merge_fs_addr[46]{} now do peer pointer comparison rather than address comparison. Signed-off-by: David Howells cc: Marc Dionne cc: linux-afs@lists.infradead.org

Merge tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-05-06T02:12:01+00:00

Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - sched: act_pedit: free pedit keys on bail from offset check Current release - new code bugs: - pds_core: - Kconfig fixes (DEBUGFS and AUXILIARY_BUS) - fix mutex double unlock in error path Previous releases - regressions: - sched: cls_api: remove block_cb from driver_list before freeing - nf_tables: fix ct untracked match breakage - eth: mtk_eth_soc: drop generic vlan rx offload - sched: flower: fix error handler on replace Previous releases - always broken: - tcp: fix skb_copy_ubufs() vs BIG TCP - ipv6: fix skb hash for some RST packets - af_packet: don't send zero-byte data in packet_sendmsg_spkt() - rxrpc: timeout handling fixes after moving client call connection to the I/O thread - ixgbe: fix panic during XDP_TX with > 64 CPUs - igc: RMW the SRRCTL register to prevent losing timestamp config - dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621 - r8152: - fix flow control issue of RTL8156A - fix the poor throughput for 2.5G devices - move setting r8153b_rx_agg_chg_indicate() to fix coalescing - enable autosuspend - ncsi: clear Tx enable mode when handling a Config required AEN - octeontx2-pf: macsec: fixes for CN10KB ASIC rev Misc: - 9p: remove INET dependency" * tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop() pds_core: fix mutex double unlock in error path net/sched: flower: fix error handler on replace Revert "net/sched: flower: Fix wrong handle assignment during filter change" net/sched: flower: fix filter idr initialization net: fec: correct the counting of XDP sent frames bonding: add xdp_features support net: enetc: check the index of the SFI rather than the handle sfc: Add back mailing list virtio_net: suppress cpu stall when free_unused_bufs ice: block LAN in case of VF to VF offload net: dsa: mt7530: fix network connectivity with multiple CPU ports net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621 9p: Remove INET dependency netfilter: nf_tables: fix ct untracked match breakage af_packet: Don't send zero-byte data in packet_sendmsg_spkt(). igc: read before write to SRRCTL register pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig pds_core: remove CONFIG_DEBUG_FS from makefile ionic: catch failure from devlink_alloc ...

rxrpc: Fix timeout of a call that hasn't yet been granted a channel

2023-05-01T06:43:19+00:00

afs_make_call() calls rxrpc_kernel_begin_call() to begin a call (which may get stalled in the background waiting for a connection to become available); it then calls rxrpc_kernel_set_max_life() to set the timeouts - but that starts the call timer so the call timer might then expire before we get a connection assigned - leading to the following oops if the call stalled: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... CPU: 1 PID: 5111 Comm: krxrpcio/0 Not tainted 6.3.0-rc7-build3+ #701 RIP: 0010:rxrpc_alloc_txbuf+0xc0/0x157 ... Call Trace: rxrpc_send_ACK+0x50/0x13b rxrpc_input_call_event+0x16a/0x67d rxrpc_io_thread+0x1b6/0x45f ? _raw_spin_unlock_irqrestore+0x1f/0x35 ? rxrpc_input_packet+0x519/0x519 kthread+0xe7/0xef ? kthread_complete_and_exit+0x1b/0x1b ret_from_fork+0x22/0x30 Fix this by noting the timeouts in struct rxrpc_call when the call is created. The timer will be started when the first packet is transmitted. It shouldn't be possible to trigger this directly from userspace through AF_RXRPC as sendmsg() will return EBUSY if the call is in the waiting-for-conn state if it dropped out of the wait due to a signal. Fixes: 9d35d880e0e4 ("rxrpc: Move client call connection to the I/O thread") Reported-by: Marc Dionne Signed-off-by: David Howells cc: "David S. Miller" cc: Eric Dumazet cc: Jakub Kicinski cc: Paolo Abeni cc: linux-afs@lists.infradead.org cc: netdev@vger.kernel.org cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller

Change DEFINE_SEMAPHORE() to take a number argument

2023-04-18T18:15:24+00:00

Fundamentally semaphores are a counted primitive, but DEFINE_SEMAPHORE() does not expose this and explicitly creates a binary semaphore. Change DEFINE_SEMAPHORE() to take a number argument and use that in the few places that open-coded it using __SEMAPHORE_INITIALIZER(). Signed-off-by: Peter Zijlstra (Intel) [mcgrof: add some tribal knowledge about why some folks prefer binary sempahores over mutexes] Reviewed-by: Sergey Senozhatsky Reviewed-by: Davidlohr Bueso Signed-off-by: Luis Chamberlain