kernel/linux.git/net/qrtr, branch v6.12.80

net: qrtr: Update packets cloning when broadcasting

2024-09-24T08:48:16+00:00

When broadcasting data to multiple nodes via MHI, using skb_clone() causes all nodes to receive the same header data. This can result in packets being discarded by endpoints, leading to lost data. This issue occurs when a socket is closed, and a QRTR_TYPE_DEL_CLIENT packet is broadcasted. All nodes receive the same destination node ID, causing the node connected to the client to discard the packet and remain unaware of the client's deletion. Replace skb_clone() with pskb_copy(), to create a separate copy of the header for each sk_buff. Fixes: bdabad3e363d ("net: Add Qualcomm IPC router") Signed-off-by: Youssef Samir Reviewed-by: Jeffery Hugo Reviewed-by: Carl Vanderlip Reviewed-by: Chris Lew Link: https://patch.msgid.link/20240916170858.2382247-1-quic_yabdulra@quicinc.com Signed-off-by: Paolo Abeni

net: qrtr: ns: Ignore ENODEV failures in ns

2024-06-14T11:17:21+00:00

Ignore the ENODEV failures returned by kernel_sendmsg(). These errors indicate that either the local port has been closed or the remote has gone down. Neither of these scenarios are fatal and will eventually be handled through packets that are later queued on the control port. Signed-off-by: Chris Lew Signed-off-by: Sarannya Sasikumar Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20240612063156.1377210-1-quic_sarannya@quicinc.com Signed-off-by: Paolo Abeni

net: qrtr: ns: Fix module refcnt

2024-05-16T08:47:45+00:00

The qrtr protocol core logic and the qrtr nameservice are combined into a single module. Neither the core logic or nameservice provide much functionality by themselves; combining the two into a single module also prevents any possible issues that may stem from client modules loading inbetween qrtr and the ns. Creating a socket takes two references to the module that owns the socket protocol. Since the ns needs to create the control socket, this creates a scenario where there are always two references to the qrtr module. This prevents the execution of 'rmmod' for qrtr. To resolve this, forcefully put the module refcount for the socket opened by the nameservice. Fixes: a365023a76f2 ("net: qrtr: combine nameservice into main module") Reported-by: Jeffrey Hugo Tested-by: Jeffrey Hugo Signed-off-by: Chris Lew Reviewed-by: Manivannan Sadhasivam Reviewed-by: Jeffrey Hugo Signed-off-by: David S. Miller

net: qrtr: support suspend/hibernation

2024-04-09T11:43:28+00:00

MHI devices may not be destroyed during suspend/hibernation, so need to unprepare/prepare MHI channels throughout the transition, this is done by adding suspend/resume callbacks. The suspend callback is called in the late suspend stage, this means MHI channels are still alive at suspend stage, and that makes it possible for an MHI controller driver to communicate with others over those channels at suspend stage. While the resume callback is called in the early resume stage, for a similar reason. Also note that we won't do unprepare/prepare when MHI device is in suspend state because it's pointless if MHI is only meant to go through a suspend/resume transition, instead of a complete power cycle. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Signed-off-by: Baochen Qiang Reviewed-by: Manivannan Sadhasivam Reviewed-by: Jeff Johnson Signed-off-by: Kalle Valo Link: https://msgid.link/20240305021320.3367-3-quic_bqiang@quicinc.com

net: qrtr: ns: Return 0 if server port is not present

2024-01-01T18:41:29+00:00

When a 'DEL_CLIENT' message is received from the remote, the corresponding server port gets deleted. A DEL_SERVER message is then announced for this server. As part of handling the subsequent DEL_SERVER message, the name- server attempts to delete the server port which results in a '-ENOENT' error. The return value from server_del() is then propagated back to qrtr_ns_worker, causing excessive error prints. To address this, return 0 from control_cmd_del_server() without checking the return value of server_del(), since the above scenario is not an error case and hence server_del() doesn't have any other error return value. Signed-off-by: Sarannya Sasikumar Reviewed-by: Simon Horman Signed-off-by: David S. Miller

net: qrtr: Handle IPCR control port format of older targets

2023-07-17T08:02:30+00:00

The destination port value in the IPCR control buffer on older targets is 0xFFFF. Handle the same by updating the dst_port to QRTR_PORT_CTRL. Signed-off-by: Vignesh Viswanathan Reviewed-by: Simon Horman Signed-off-by: David S. Miller

net: qrtr: ns: Change nodes radix tree to xarray

2023-07-17T08:02:30+00:00

There is a use after free scenario while iterating through the nodes radix tree despite the ns being a single threaded process. This can happen when the radix tree APIs are not synchronized with the rcu_read_lock() APIs. Convert the radix tree for nodes to xarray to take advantage of the built in rcu lock usage provided by xarray. Signed-off-by: Chris Lew Signed-off-by: Vignesh Viswanathan Reviewed-by: Simon Horman Signed-off-by: David S. Miller

net: qrtr: ns: Change servers radix tree to xarray

2023-07-17T08:02:30+00:00

There is a use after free scenario while iterating through the servers radix tree despite the ns being a single threaded process. This can happen when the radix tree APIs are not synchronized with the rcu_read_lock() APIs. Convert the radix tree for servers to xarray to take advantage of the built in rcu lock usage provided by xarray. Signed-off-by: Chris Lew Signed-off-by: Vignesh Viswanathan Reviewed-by: Simon Horman Signed-off-by: David S. Miller

Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2023-06-28T23:43:10+00:00

Pull networking changes from Jakub Kicinski: "WiFi 7 and sendpage changes are the biggest pieces of work for this release. The latter will definitely require fixes but I think that we got it to a reasonable point. Core: - Rework the sendpage & splice implementations Instead of feeding data into sockets page by page extend sendmsg handlers to support taking a reference on the data, controlled by a new flag called MSG_SPLICE_PAGES Rework the handling of unexpected-end-of-file to invoke an additional callback instead of trying to predict what the right combination of MORE/NOTLAST flags is Remove the MSG_SENDPAGE_NOTLAST flag completely - Implement SCM_PIDFD, a new type of CMSG type analogous to SCM_CREDENTIALS, but it contains pidfd instead of plain pid - Enable socket busy polling with CONFIG_RT - Improve reliability and efficiency of reporting for ref_tracker - Auto-generate a user space C library for various Netlink families Protocols: - Allow TCP to shrink the advertised window when necessary, prevent sk_rcvbuf auto-tuning from growing the window all the way up to tcp_rmem[2] - Use per-VMA locking for "page-flipping" TCP receive zerocopy - Prepare TCP for device-to-device data transfers, by making sure that payloads are always attached to skbs as page frags - Make the backoff time for the first N TCP SYN retransmissions linear. Exponential backoff is unnecessarily conservative - Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO) - Avoid waking up applications using TLS sockets until we have a full record - Allow using kernel memory for protocol ioctl callbacks, paving the way to issuing ioctls over io_uring - Add nolocalbypass option to VxLAN, forcing packets to be fully encapsulated even if they are destined for a local IP address - Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure in-kernel ECMP implementation (e.g. Open vSwitch) select the same link for all packets. Support L4 symmetric hashing in Open vSwitch - PPPoE: make number of hash bits configurable - Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client (ipconfig) - Add layer 2 miss indication and filtering, allowing higher layers (e.g. ACL filters) to make forwarding decisions based on whether packet matched forwarding state in lower devices (bridge) - Support matching on Connectivity Fault Management (CFM) packets - Hide the "link becomes ready" IPv6 messages by demoting their printk level to debug - HSR: don't enable promiscuous mode if device offloads the proto - Support active scanning in IEEE 802.15.4 - Continue work on Multi-Link Operation for WiFi 7 BPF: - Add precision propagation for subprogs and callbacks. This allows maintaining verification efficiency when subprograms are used, or in fact passing the verifier at all for complex programs, especially those using open-coded iterators - Improve BPF's {g,s}setsockopt() length handling. Previously BPF assumed the length is always equal to the amount of written data. But some protos allow passing a NULL buffer to discover what the output buffer *should* be, without writing anything - Accept dynptr memory as memory arguments passed to helpers - Add routing table ID to bpf_fib_lookup BPF helper - Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands - Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark maps as read-only) - Show target_{obj,btf}_id in tracing link fdinfo - Addition of several new kfuncs (most of the names are self-explanatory): - Add a set of new dynptr kfuncs: bpf_dynptr_adjust(), bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size() and bpf_dynptr_clone(). - bpf_task_under_cgroup() - bpf_sock_destroy() - force closing sockets - bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs Netfilter: - Relax set/map validation checks in nf_tables. Allow checking presence of an entry in a map without using the value - Increase ip_vs_conn_tab_bits range for 64BIT builds - Allow updating size of a set - Improve NAT tuple selection when connection is closing Driver API: - Integrate netdev with LED subsystem, to allow configuring HW "offloaded" blinking of LEDs based on link state and activity (i.e. packets coming in and out) - Support configuring rate selection pins of SFP modules - Factor Clause 73 auto-negotiation code out of the drivers, provide common helper routines - Add more fool-proof helpers for managing lifetime of MDIO devices associated with the PCS layer - Allow drivers to report advanced statistics related to Time Aware scheduler offload (taprio) - Allow opting out of VF statistics in link dump, to allow more VFs to fit into the message - Split devlink instance and devlink port operations New hardware / drivers: - Ethernet: - Synopsys EMAC4 IP support (stmmac) - Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches - Marvell 88E6250 7 port switches - Microchip LAN8650/1 Rev.B0 PHYs - MediaTek MT7981/MT7988 built-in 1GE PHY driver - WiFi: - Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps - Realtek RTL8723DS (SDIO variant) - Realtek RTL8851BE - CAN: - Fintek F81604 Drivers: - Ethernet NICs: - Intel (100G, ice): - support dynamic interrupt allocation - use meta data match instead of VF MAC addr on slow-path - nVidia/Mellanox: - extend link aggregation to handle 4, rather than just 2 ports - spawn sub-functions without any features by default - OcteonTX2: - support HTB (Tx scheduling/QoS) offload - make RSS hash generation configurable - support selecting Rx queue using TC filters - Wangxun (ngbe/txgbe): - add basic Tx/Rx packet offloads - add phylink support (SFP/PCS control) - Freescale/NXP (enetc): - report TAPRIO packet statistics - Solarflare/AMD: - support matching on IP ToS and UDP source port of outer header - VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6 - add devlink dev info support for EF10 - Virtual NICs: - Microsoft vNIC: - size the Rx indirection table based on requested configuration - support VLAN tagging - Amazon vNIC: - try to reuse Rx buffers if not fully consumed, useful for ARM servers running with 16kB pages - Google vNIC: - support TCP segmentation of >64kB frames - Ethernet embedded switches: - Marvell (mv88e6xxx): - enable USXGMII (88E6191X) - Microchip: - lan966x: add support for Egress Stage 0 ACL engine - lan966x: support mapping packet priority to internal switch priority (based on PCP or DSCP) - Ethernet PHYs: - Broadcom PHYs: - support for Wake-on-LAN for BCM54210E/B50212E - report LPI counter - Microsemi PHYs: support RGMII delay configuration (VSC85xx) - Micrel PHYs: receive timestamp in the frame (LAN8841) - Realtek PHYs: support optional external PHY clock - Altera TSE PCS: merge the driver into Lynx PCS which it is a variant of - CAN: Kvaser PCIEcan: - support packet timestamping - WiFi: - Intel (iwlwifi): - major update for new firmware and Multi-Link Operation (MLO) - configuration rework to drop test devices and split the different families - support for segmented PNVM images and power tables - new vendor entries for PPAG (platform antenna gain) feature - Qualcomm 802.11ax (ath11k): - Multiple Basic Service Set Identifier (MBSSID) and Enhanced MBSSID Advertisement (EMA) support in AP mode - support factory test mode - RealTek (rtw89): - add RSSI based antenna diversity - support U-NII-4 channels on 5 GHz band - RealTek (rtl8xxxu): - AP mode support for 8188f - support USB RX aggregation for the newer chips" * tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits) net: scm: introduce and use scm_recv_unix helper af_unix: Skip SCM_PIDFD if scm->pid is NULL. net: lan743x: Simplify comparison netlink: Add __sock_i_ino() for __netlink_diag_dump(). net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses Revert "af_unix: Call scm_recv() only after scm_set_cred()." phylink: ReST-ify the phylink_pcs_neg_mode() kdoc libceph: Partially revert changes to support MSG_SPLICE_PAGES net: phy: mscc: fix packet loss due to RGMII delays net: mana: use vmalloc_array and vcalloc net: enetc: use vmalloc_array and vcalloc ionic: use vmalloc_array and vcalloc pds_core: use vmalloc_array and vcalloc gve: use vmalloc_array and vcalloc octeon_ep: use vmalloc_array and vcalloc net: usb: qmi_wwan: add u-blox 0x1312 composition perf trace: fix MSG_SPLICE_PAGES build error ipvlan: Fix return value of ipvlan_queue_xmit() netfilter: nf_tables: fix underflow in chain reference counter netfilter: nf_tables: unbind non-anonymous set if rule construction fails ...

sock: Remove ->sendpage*() in favour of sendmsg(MSG_SPLICE_PAGES)

2023-06-24T22:50:13+00:00

Remove ->sendpage() and ->sendpage_locked(). sendmsg() with MSG_SPLICE_PAGES should be used instead. This allows multiple pages and multipage folios to be passed through. Signed-off-by: David Howells Acked-by: Marc Kleine-Budde # for net/can cc: Jens Axboe cc: Matthew Wilcox cc: linux-afs@lists.infradead.org cc: mptcp@lists.linux.dev cc: rds-devel@oss.oracle.com cc: tipc-discussion@lists.sourceforge.net cc: virtualization@lists.linux-foundation.org Link: https://lore.kernel.org/r/20230623225513.2732256-16-dhowells@redhat.com Signed-off-by: Jakub Kicinski