kernel/linux.git/net/openvswitch/datapath.c, branch linux-6.0.y

openvswitch: Fix flow lookup to use unmasked key

2022-12-31T12:26:39+00:00

[ Upstream commit 68bb10101e6b0a6bb44e9c908ef795fc4af99eae ] The commit mentioned below causes the ovs_flow_tbl_lookup() function to be called with the masked key. However, it's supposed to be called with the unmasked key. This due to the fact that the datapath supports installing wider flows, and OVS relies on this behavior. For example if ipv4(src=1.1.1.1/192.0.0.0, dst=1.1.1.2/192.0.0.0) exists, a wider flow (smaller mask) of ipv4(src=192.1.1.1/128.0.0.0,dst=192.1.1.2/ 128.0.0.0) is allowed to be added. However, if we try to add a wildcard rule, the installation fails: $ ovs-appctl dpctl/add-flow system@myDP "in_port(1),eth_type(0x0800), \ ipv4(src=1.1.1.1/192.0.0.0,dst=1.1.1.2/192.0.0.0,frag=no)" 2 $ ovs-appctl dpctl/add-flow system@myDP "in_port(1),eth_type(0x0800), \ ipv4(src=192.1.1.1/0.0.0.0,dst=49.1.1.2/0.0.0.0,frag=no)" 2 ovs-vswitchd: updating flow table (File exists) The reason is that the key used to determine if the flow is already present in the system uses the original key ANDed with the mask. This results in the IP address not being part of the (miniflow) key, i.e., being substituted with an all-zero value. When doing the actual lookup, this results in the key wrongfully matching the first flow, and therefore the flow does not get installed. This change reverses the commit below, but rather than having the key on the stack, it's allocated. Fixes: 190aa3e77880 ("openvswitch: Fix Frame-size larger than 1024 bytes warning.") Signed-off-by: Eelco Chaudron Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: Remove the obsolte u64_stats_fetch_*_irq() users (net).

2022-12-31T12:26:12+00:00

[ Upstream commit d120d1a63b2c484d6175873d8ee736a633f74b70 ] Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner Signed-off-by: Sebastian Andrzej Siewior Acked-by: Peter Zijlstra (Intel) Signed-off-by: Jakub Kicinski Stable-dep-of: 1dbd8d9a82e3 ("ipvs: use u64_stats_t for the per-cpu counters") Signed-off-by: Sasha Levin

openvswitch: switch from WARN to pr_warn

2022-11-03T15:00:33+00:00

[ Upstream commit fd954cc1919e35cb92f78671cab6e42d661945a3 ] As noted by Paolo Abeni, pr_warn doesn't generate any splat and can still preserve the warning to the user that feature downgrade occurred. We likely cannot introduce other kinds of checks / enforcement here because syzbot can generate different genl versions to the datapath. Reported-by: syzbot+31cde0bef4bbf8ba2d86@syzkaller.appspotmail.com Fixes: 44da5ae5fbea ("openvswitch: Drop user features if old user space attempted to create datapath") Cc: Thomas Graf Signed-off-by: Aaron Conole Acked-by: Ilya Maximets Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

openvswitch: Fix overreporting of drops in dropwatch

2022-10-21T10:39:06+00:00

[ Upstream commit c21ab2afa2c64896a7f0e3cbc6845ec63dcfad2e ] Currently queue_userspace_packet will call kfree_skb for all frames, whether or not an error occurred. This can result in a single dropped frame being reported as multiple drops in dropwatch. This functions caller may also call kfree_skb in case of an error. This patch will consume the skbs instead and allow caller's to use kfree_skb. Signed-off-by: Mike Pattrick Link: https://bugzilla.redhat.com/show_bug.cgi?id=2109957 Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

openvswitch: Fix double reporting of drops in dropwatch

2022-10-21T10:39:06+00:00

[ Upstream commit 1100248a5c5ccd57059eb8d02ec077e839a23826 ] Frames sent to userspace can be reported as dropped in ovs_dp_process_packet, however, if they are dropped in the netlink code then netlink_attachskb will report the same frame as dropped. This patch checks for error codes which indicate that the frame has already been freed. Signed-off-by: Mike Pattrick Link: https://bugzilla.redhat.com/show_bug.cgi?id=2109946 Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

openvswitch: fix memory leak at failed datapath creation

2022-08-27T02:26:30+00:00

ovs_dp_cmd_new()->ovs_dp_change()->ovs_dp_set_upcall_portids() allocates array via kmalloc. If for some reason new_vport() fails during ovs_dp_cmd_new() dp->upcall_portids must be freed. Add missing kfree. Kmemleak example: unreferenced object 0xffff88800c382500 (size 64): comm "dump_state", pid 323, jiffies 4294955418 (age 104.347s) hex dump (first 32 bytes): 5e c2 79 e4 1f 7a 38 c7 09 21 38 0c 80 88 ff ff ^.y..z8..!8..... 03 00 00 00 0a 00 00 00 14 00 00 00 28 00 00 00 ............(... backtrace: [<0000000071bebc9f>] ovs_dp_set_upcall_portids+0x38/0xa0 [<000000000187d8bd>] ovs_dp_change+0x63/0xe0 [<000000002397e446>] ovs_dp_cmd_new+0x1f0/0x380 [<00000000aa06f36e>] genl_family_rcv_msg_doit+0xea/0x150 [<000000008f583bc4>] genl_rcv_msg+0xdc/0x1e0 [<00000000fa10e377>] netlink_rcv_skb+0x50/0x100 [<000000004959cece>] genl_rcv+0x24/0x40 [<000000004699ac7f>] netlink_unicast+0x23e/0x360 [<00000000c153573e>] netlink_sendmsg+0x24e/0x4b0 [<000000006f4aa380>] sock_sendmsg+0x62/0x70 [<00000000d0068654>] ____sys_sendmsg+0x230/0x270 [<0000000012dacf7d>] ___sys_sendmsg+0x88/0xd0 [<0000000011776020>] __sys_sendmsg+0x59/0xa0 [<000000002e8f2dc1>] do_syscall_64+0x3b/0x90 [<000000003243e7cb>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: b83d23a2a38b ("openvswitch: Introduce per-cpu upcall dispatch") Acked-by: Aaron Conole Signed-off-by: Andrey Zhadchenko Link: https://lore.kernel.org/r/20220825020326.664073-1-andrey.zhadchenko@virtuozzo.com Signed-off-by: Jakub Kicinski

net/sched: Enable tc skb ext allocation on chain miss only when needed

2022-02-05T10:12:53+00:00

Currently tc skb extension is used to send miss info from tc to ovs datapath module, and driver to tc. For the tc to ovs miss it is currently always allocated even if it will not be used by ovs datapath (as it depends on a requested feature). Export the static key which is used by openvswitch module to guard this code path as well, so it will be skipped if ovs datapath doesn't need it. Enable this code path once ovs datapath needs it. Signed-off-by: Paul Blakey Reviewed-by: Jamal Hadi Salim Signed-off-by: David S. Miller

openvswitch: fix sparse warning incorrect type

2021-07-27T10:48:43+00:00

fix incorrect type in argument 1 (different address spaces) ../net/openvswitch/datapath.c:169:17: warning: incorrect type in argument 1 (different address spaces) ../net/openvswitch/datapath.c:169:17: expected void const * ../net/openvswitch/datapath.c:169:17: got struct dp_nlsk_pids [noderef] __rcu *upcall_portids Found at: https://patchwork.kernel.org/project/netdevbpf/patch/20210630095350.817785-1-mark.d.gray@redhat.com/#24285159 Signed-off-by: Mark Gray Signed-off-by: David S. Miller

openvswitch: fix alignment issues

2021-07-27T10:48:42+00:00

Signed-off-by: Mark Gray Signed-off-by: David S. Miller

openvswitch: Introduce per-cpu upcall dispatch

2021-07-16T18:06:33+00:00

The Open vSwitch kernel module uses the upcall mechanism to send packets from kernel space to user space when it misses in the kernel space flow table. The upcall sends packets via a Netlink socket. Currently, a Netlink socket is created for every vport. In this way, there is a 1:1 mapping between a vport and a Netlink socket. When a packet is received by a vport, if it needs to be sent to user space, it is sent via the corresponding Netlink socket. This mechanism, with various iterations of the corresponding user space code, has seen some limitations and issues: * On systems with a large number of vports, there is a correspondingly large number of Netlink sockets which can limit scaling. (https://bugzilla.redhat.com/show_bug.cgi?id=1526306) * Packet reordering on upcalls. (https://bugzilla.redhat.com/show_bug.cgi?id=1844576) * A thundering herd issue. (https://bugzilla.redhat.com/show_bug.cgi?id=1834444) This patch introduces an alternative, feature-negotiated, upcall mode using a per-cpu dispatch rather than a per-vport dispatch. In this mode, the Netlink socket to be used for the upcall is selected based on the CPU of the thread that is executing the upcall. In this way, it resolves the issues above as: a) The number of Netlink sockets scales with the number of CPUs rather than the number of vports. b) Ordering per-flow is maintained as packets are distributed to CPUs based on mechanisms such as RSS and flows are distributed to a single user space thread. c) Packets from a flow can only wake up one user space thread. The corresponding user space code can be found at: https://mail.openvswitch.org/pipermail/ovs-dev/2021-July/385139.html Bugzilla: https://bugzilla.redhat.com/1844576 Signed-off-by: Mark Gray Acked-by: Flavio Leitner Acked-by: Pravin B Shelar Signed-off-by: David S. Miller