kernel/linux.git/net/nfc/nci/data.c, branch linux-7.0.y

nfc: nci: clear NCI_DATA_EXCHANGE before calling completion callback

2026-03-05T02:18:57+00:00

Move clear_bit(NCI_DATA_EXCHANGE) before invoking the data exchange callback in nci_data_exchange_complete(). The callback (e.g. rawsock_data_exchange_complete) may immediately schedule another data exchange via schedule_work(tx_work). On a multi-CPU system, tx_work can run and reach nci_transceive() before the current nci_data_exchange_complete() clears the flag, causing test_and_set_bit(NCI_DATA_EXCHANGE) to return -EBUSY and the new transfer to fail. This causes intermittent flakes in nci/nci_dev in NIPA: # # RUN NCI.NCI1_0.t4t_tag_read ... # # t4t_tag_read: Test terminated by timeout # # FAIL NCI.NCI1_0.t4t_tag_read # not ok 3 NCI.NCI1_0.t4t_tag_read Fixes: 38f04c6b1b68 ("NFC: protect nci_data_exchange transactions") Reviewed-by: Joe Damato Link: https://patch.msgid.link/20260303162346.2071888-5-kuba@kernel.org Signed-off-by: Jakub Kicinski

treewide: Switch/rename to timer_delete[_sync]()

2025-04-05T08:30:12+00:00

timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar

NFC: nci: fix memory leak in nci_rx_data_packet()

2022-11-22T11:42:23+00:00

Syzbot reported a memory leak about skb: unreferenced object 0xffff88810e144e00 (size 240): comm "syz-executor284", pid 3701, jiffies 4294952403 (age 12.620s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] __alloc_skb+0x1f9/0x270 net/core/skbuff.c:497 [] alloc_skb include/linux/skbuff.h:1267 [inline] [] virtual_ncidev_write+0x24/0xe0 drivers/nfc/virtual_ncidev.c:116 [] do_loop_readv_writev fs/read_write.c:759 [inline] [] do_loop_readv_writev fs/read_write.c:743 [inline] [] do_iter_write+0x253/0x300 fs/read_write.c:863 [] vfs_writev+0xdd/0x240 fs/read_write.c:934 [] do_writev+0xa6/0x1c0 fs/read_write.c:977 [] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [] entry_SYSCALL_64_after_hwframe+0x63/0xcd In nci_rx_data_packet(), if we don't get a valid conn_info, we will return directly but forget to release the skb. Reported-by: syzbot+cdb9a427d1bc08815104@syzkaller.appspotmail.com Fixes: 4aeee6871e8c ("NFC: nci: Add dynamic logical connections support") Signed-off-by: Liu Shixin Link: https://lore.kernel.org/r/20221118082419.239475-1-liushixin2@huawei.com Signed-off-by: Paolo Abeni

NFC: nci: fix sleep in atomic context bugs caused by nci_skb_alloc

2022-05-18T00:55:53+00:00

There are sleep in atomic context bugs when the request to secure element of st-nci is timeout. The root cause is that nci_skb_alloc with GFP_KERNEL parameter is called in st_nci_se_wt_timeout which is a timer handler. The call paths that could trigger bugs are shown below: (interrupt context 1) st_nci_se_wt_timeout nci_hci_send_event nci_hci_send_data nci_skb_alloc(..., GFP_KERNEL) //may sleep (interrupt context 2) st_nci_se_wt_timeout nci_hci_send_event nci_hci_send_data nci_send_data nci_queue_tx_data_frags nci_skb_alloc(..., GFP_KERNEL) //may sleep This patch changes allocation mode of nci_skb_alloc from GFP_KERNEL to GFP_ATOMIC in order to prevent atomic context sleeping. The GFP_ATOMIC flag makes memory allocation operation could be used in atomic context. Fixes: ed06aeefdac3 ("nfc: st-nci: Rename st21nfcb to st-nci") Signed-off-by: Duoming Zhou Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220517012530.75714-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski

nfc: nci: constify several pointers to u8, sk_buff and other structs

2021-07-30T15:22:52+00:00

Several functions receive pointers to u8, sk_buff or other structs but do not modify the contents so make them const. This allows doing the same for local variables and in total makes the code a little bit safer. This makes const also data passed as "unsigned long opt" argument to nci_request() function. Usual flow for such functions is: 1. Receive "u8 *" and store it (the pointer) in a structure allocated on stack (e.g. struct nci_set_config_param), 2. Call nci_request() or __nci_request() passing a callback function an the pointer to the structure via an "unsigned long opt", 3. nci_request() calls the callback which dereferences "unsigned long opt" in a read-only way. This converts all above paths to use proper pointer to const data, so entire flow is safer. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Jakub Kicinski

nfc: fix potential illegal memory access

2019-07-08T19:46:24+00:00

The frags_q is not properly initialized, it may result in illegal memory access when conn_info is NULL. The "goto free_exit" should be replaced by "goto exit". Signed-off-by: Yang Wei Signed-off-by: David S. Miller

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234

2019-06-19T15:09:07+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Alexios Zavras Reviewed-by: Allison Randal Reviewed-by: Enrico Weigelt Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman

networking: make skb_push & __skb_push return void pointers

2017-06-16T15:48:40+00:00

It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

networking: introduce and use skb_put_data()

2017-06-16T15:48:37+00:00

A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

NFC: nci: Add function to get max packet size for conn

2015-10-25T18:11:42+00:00

FDP driver needs to send the firmware as regular packets (not fragmented). The driver should have a way to get the max packet size for a given connection. Signed-off-by: Robert Dolca Signed-off-by: Samuel Ortiz