kernel/linux.git/net/netlabel/netlabel_user.c, branch linux-4.13.y

netlabel: Initial support for the CALIPSO netlink protocol.

2016-06-27T19:02:46+00:00

CALIPSO is a packet labelling protocol for IPv6 which is very similar to CIPSO. It is specified in RFC 5570. Much of the code is based on the current CIPSO code. This adds support for adding passthrough-type CALIPSO DOIs through the NLBL_CALIPSO_C_ADD command. It requires attributes: NLBL_CALIPSO_A_TYPE which must be CALIPSO_MAP_PASS. NLBL_CALIPSO_A_DOI. In passthrough mode the CALIPSO engine will map MLS secattr levels and categories directly to the packet label. At this stage, the major difference between this and the CIPSO code is that IPv6 may be compiled as a module. To allow for this the CALIPSO functions are registered at module init time. Signed-off-by: Huw Davies Signed-off-by: Paul Moore

netlabel: directly return netlbl_unlabel_genl_init()

2014-10-08T20:08:04+00:00

No need to store netlbl_unlabel_genl_init result and test it before returning. Signed-off-by: Fabian Frederick Signed-off-by: David S. Miller

netlabel: Fix FSF address in file headers

2013-12-06T17:37:56+00:00

Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL so that we do not have to keep updating the header comments anytime the address changes. CC: Paul Moore Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller

userns: Convert the audit loginuid to be a kuid

2012-09-18T01:08:54+00:00

Always store audit loginuids in type kuid_t. Print loginuids by converting them into uids in the appropriate user namespace, and then printing the resulting uid. Modify audit_get_loginuid to return a kuid_t. Modify audit_set_loginuid to take a kuid_t. Modify /proc//loginuid on read to convert the loginuid into the user namespace of the opener of the file. Modify /proc//loginud on write to convert the loginuid rom the user namespace of the opener of the file. Cc: Al Viro Cc: Eric Paris Cc: Paul Moore ? Cc: David Miller Signed-off-by: Eric W. Biederman

doc: Update the email address for Paul Moore in various source files

2011-08-02T00:58:33+00:00

My @hp.com will no longer be valid starting August 5, 2011 so an update is necessary. My new email address is employer independent so we don't have to worry about doing this again any time soon. Signed-off-by: Paul Moore Signed-off-by: Paul Moore Signed-off-by: David S. Miller

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32+00:00

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

Audit: collect sessionid in netlink messages

2008-04-28T10:18:03+00:00

Previously I added sessionid output to all audit messages where it was available but we still didn't know the sessionid of the sender of netlink messages. This patch adds that information to netlink messages so we can audit who sent netlink messages. Signed-off-by: Eric Paris Signed-off-by: Al Viro

[NETLABEL]: Move some initialization code into __init section.

2008-02-18T06:33:57+00:00

Everything that is called from netlbl_init() can be marked with __init. This moves 620 bytes from .text section to .text.init one. Signed-off-by: Pavel Emelyanov Acked-by: Paul Moore Signed-off-by: David S. Miller

[NETLABEL]: Compilation for CONFIG_AUDIT=n case.

2008-02-13T06:35:37+00:00

The audit_log_start() will expand into an empty do { } while (0) construction and the audit_ctx becomes unused. The solution: push current->audit_context into audit_log_start() directly, since it is not required in any other place in the calling function. Signed-off-by: Pavel Emelyanov Signed-off-by: David S. Miller

Net/Security: fix memory leaks from security_secid_to_secctx()

2007-08-02T15:52:26+00:00

The security_secid_to_secctx() function returns memory that must be freed by a call to security_release_secctx() which was not always happening. This patch fixes two of these problems (all that I could find in the kernel source at present). Signed-off-by: Paul Moore Acked-by: Stephen Smalley Signed-off-by: James Morris