kernel/linux.git/net/ncsi, branch v5.10.257

net: ncsi: fix skb leak in error paths

2026-04-18T08:30:56+00:00

commit 5c3398a54266541610c8d0a7082e654e9ff3e259 upstream. Early return paths in NCSI RX and AEN handlers fail to release the received skb, resulting in a memory leak. Specifically, ncsi_aen_handler() returns on invalid AEN packets without consuming the skb. Similarly, ncsi_rcv_rsp() exits early when failing to resolve the NCSI device, response handler, or request, leaving the skb unfreed. CC: stable@vger.kernel.org Fixes: 7a82ecf4cfb8 ("net/ncsi: NCSI AEN packet handler") Fixes: 138635cc27c9 ("net/ncsi: NCSI response packet handler") Signed-off-by: Jian Zhang Link: https://patch.msgid.link/20260305060656.3357250-1-zhangjian.3032@bytedance.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: ncsi: Fix buffer overflow in fetching version id

2025-08-28T14:22:44+00:00

[ Upstream commit 8e16170ae972c7fed132bc928914a2ffb94690fc ] In NC-SI spec v1.2 section 8.4.44.2, the firmware name doesn't need to be null terminated while its size occupies the full size of the field. Fix the buffer overflow issue by adding one additional byte for null terminator. Signed-off-by: Hari Kalavakunta Reviewed-by: Paul Fertser Link: https://patch.msgid.link/20250610193338.1368-1-kalavakunta.hari.prasad@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: ncsi: Fix GCPS 64-bit member variables

2025-06-27T10:04:02+00:00

[ Upstream commit e8a1bd8344054ce27bebf59f48e3f6bc10bc419b ] Correct Get Controller Packet Statistics (GCPS) 64-bit wide member variables, as per DSP0222 v1.0.0 and forward specs. The Driver currently collects these stats, but they are yet to be exposed to the user. Therefore, no user impact. Statistics fixes: Total Bytes Received (byte range 28..35) Total Bytes Transmitted (byte range 36..43) Total Unicast Packets Received (byte range 44..51) Total Multicast Packets Received (byte range 52..59) Total Broadcast Packets Received (byte range 60..67) Total Unicast Packets Transmitted (byte range 68..75) Total Multicast Packets Transmitted (byte range 76..83) Total Broadcast Packets Transmitted (byte range 84..91) Valid Bytes Received (byte range 204..11) Signed-off-by: Hari Kalavakunta Reviewed-by: Paul Fertser Link: https://patch.msgid.link/20250410012309.1343-1-kalavakunta.hari.prasad@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net/ncsi: wait for the last response to Deselect Package before configuring channel

2025-03-13T11:47:13+00:00

commit 6bb194d036c6e1b329dcdff459338cdd9a54802a upstream. The NCSI state machine as it's currently implemented assumes that transition to the next logical state is performed either explicitly by calling `schedule_work(&ndp->work)` to re-queue itself or implicitly after processing the predefined (ndp->pending_req_num) number of replies. Thus to avoid the configuration FSM from advancing prematurely and getting out of sync with the process it's essential to not skip waiting for a reply. This patch makes the code wait for reception of the Deselect Package response for the last package probed before proceeding to channel configuration. Thanks go to Potin Lai and Cosmo Chou for the initial investigation and testing. Fixes: 8e13f70be05e ("net/ncsi: Probe single packages to avoid conflict") Cc: stable@vger.kernel.org Signed-off-by: Paul Fertser Link: https://patch.msgid.link/20250116152900.8656-1-fercerpav@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net/ncsi: Fix the multi thread manner of NCSI driver

2024-07-05T07:12:22+00:00

[ Upstream commit e85e271dec0270982afed84f70dc37703fcc1d52 ] Currently NCSI driver will send several NCSI commands back to back without waiting the response of previous NCSI command or timeout in some state when NIC have multi channel. This operation against the single thread manner defined by NCSI SPEC(section 6.3.2.3 in DSP0222_1.1.1) According to NCSI SPEC(section 6.2.13.1 in DSP0222_1.1.1), we should probe one channel at a time by sending NCSI commands (Clear initial state, Get version ID, Get capabilities...), than repeat this steps until the max number of channels which we got from NCSI command (Get capabilities) has been probed. Fixes: e6f44ed6d04d ("net/ncsi: Package and channel management") Signed-off-by: DelphineCCChiu Link: https://lore.kernel.org/r/20240529065856.825241-1-delphine_cc_chiu@wiwynn.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net/ncsi: Simplify Kconfig/dts control flow

2024-07-05T07:12:21+00:00

[ Upstream commit c797ce168930ce3d62a9b7fc4d7040963ee6a01e ] Background: 1. CONFIG_NCSI_OEM_CMD_KEEP_PHY If this is enabled, we send an extra OEM Intel command in the probe sequence immediately after discovering a channel (e.g. after "Clear Initial State"). 2. CONFIG_NCSI_OEM_CMD_GET_MAC If this is enabled, we send one of 3 OEM "Get MAC Address" commands from Broadcom, Mellanox (Nvidida), and Intel in the *configuration* sequence for a channel. 3. mellanox,multi-host (or mlx,multi-host) Introduced by this patch: https://lore.kernel.org/all/20200108234341.2590674-1-vijaykhemka@fb.com/ Which was actually originally from cosmo.chou@quantatw.com: https://github.com/facebook/openbmc-linux/commit/9f132a10ec48db84613519258cd8a317fb9c8f1b Cosmo claimed that the Nvidia ConnectX-4 and ConnectX-6 NIC's don't respond to Get Version ID, et. al in the probe sequence unless you send the Set MC Affinity command first. Problem Statement: We've been using a combination of #ifdef code blocks and IS_ENABLED() conditions to conditionally send these OEM commands. It makes adding any new code around these commands hard to understand. Solution: In this patch, I just want to remove the conditionally compiled blocks of code, and always use IS_ENABLED(...) to do dynamic control flow. I don't think the small amount of code this adds to non-users of the OEM Kconfigs is a big deal. Signed-off-by: Peter Delevoryas Signed-off-by: David S. Miller Stable-dep-of: e85e271dec02 ("net/ncsi: Fix the multi thread manner of NCSI driver") Signed-off-by: Sasha Levin

net/ncsi: add NCSI Intel OEM command to keep PHY up

2024-07-05T07:12:21+00:00

[ Upstream commit abd2fddc94a619b96bf41c60429d4c32bd118e17 ] This allows to keep PHY link up and prevents any channel resets during the host load. It is KEEP_PHY_LINK_UP option(Veto bit) in i210 datasheet which block PHY reset and power state changes. Signed-off-by: Ivan Mikhaylov Signed-off-by: David S. Miller Stable-dep-of: e85e271dec02 ("net/ncsi: Fix the multi thread manner of NCSI driver") Signed-off-by: Sasha Levin

net/ncsi: Fix netlink major/minor version numbers

2024-01-25T22:37:44+00:00

[ Upstream commit 3084b58bfd0b9e4b5e034f31f31b42977db35f12 ] The netlink interface for major and minor version numbers doesn't actually return the major and minor version numbers. It reports a u32 that contains the (major, minor, update, alpha1) components as the major version number, and then alpha2 as the minor version number. For whatever reason, the u32 byte order was reversed (ntohl): maybe it was assumed that the encoded value was a single big-endian u32, and alpha2 was the minor version. The correct way to get the supported NC-SI version from the network controller is to parse the Get Version ID response as described in 8.4.44 of the NC-SI spec[1]. Get Version ID Response Packet Format Bits +--------+--------+--------+--------+ Bytes | 31..24 | 23..16 | 15..8 | 7..0 | +-------+--------+--------+--------+--------+ | 0..15 | NC-SI Header | +-------+--------+--------+--------+--------+ | 16..19| Response code | Reason code | +-------+--------+--------+--------+--------+ |20..23 | Major | Minor | Update | Alpha1 | +-------+--------+--------+--------+--------+ |24..27 | reserved | Alpha2 | +-------+--------+--------+--------+--------+ | .... other stuff .... | The major, minor, and update fields are all binary-coded decimal (BCD) encoded [2]. The spec provides examples below the Get Version ID response format in section 8.4.44.1, but for practical purposes, this is an example from a live network card: root@bmc:~# ncsi-util 0x15 NC-SI Command Response: cmd: GET_VERSION_ID(0x15) Response: COMMAND_COMPLETED(0x0000) Reason: NO_ERROR(0x0000) Payload length = 40 20: 0xf1 0xf1 0xf0 0x00 <<<<<<<<< (major, minor, update, alpha1) 24: 0x00 0x00 0x00 0x00 <<<<<<<<< (_, _, _, alpha2) 28: 0x6d 0x6c 0x78 0x30 32: 0x2e 0x31 0x00 0x00 36: 0x00 0x00 0x00 0x00 40: 0x16 0x1d 0x07 0xd2 44: 0x10 0x1d 0x15 0xb3 48: 0x00 0x17 0x15 0xb3 52: 0x00 0x00 0x81 0x19 This should be parsed as "1.1.0". "f" in the upper-nibble means to ignore it, contributing zero. If both nibbles are "f", I think the whole field is supposed to be ignored. Major and minor are "required", meaning they're not supposed to be "ff", but the update field is "optional" so I think it can be ff. I think the simplest thing to do is just set the major and minor to zero instead of juggling some conditional logic or something. bcd2bin() from "include/linux/bcd.h" seems to assume both nibbles are 0-9, so I've provided a custom BCD decoding function. Alpha1 and alpha2 are ISO/IEC 8859-1 encoded, which just means ASCII characters as far as I can tell, although the full encoding table for non-alphabetic characters is slightly different (I think). I imagine the alpha fields are just supposed to be alphabetic characters, but I haven't seen any network cards actually report a non-zero value for either. If people wrote software against this netlink behavior, and were parsing the major and minor versions themselves from the u32, then this would definitely break their code. [1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0222_1.0.0.pdf [2] https://en.wikipedia.org/wiki/Binary-coded_decimal [2] https://en.wikipedia.org/wiki/ISO/IEC_8859-1 Signed-off-by: Peter Delevoryas Fixes: 138635cc27c9 ("net/ncsi: NCSI response packet handler") Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ncsi: internal.h: Fix a spello

2024-01-25T22:37:44+00:00

[ Upstream commit 195a8ec4033b4124f6864892e71dcef24ba74a5a ] s/Firware/Firmware/ Signed-off-by: Bhaskar Chowdhury Signed-off-by: David S. Miller Stable-dep-of: 3084b58bfd0b ("net/ncsi: Fix netlink major/minor version numbers") Signed-off-by: Sasha Levin

Revert ncsi: Propagate carrier gain/loss events to the NCSI controller

2023-11-28T16:55:00+00:00

commit 9e2e7efbbbff69d8340abb56d375dd79d1f5770f upstream. This reverts commit 3780bb29311eccb7a1c9641032a112eed237f7e3. The cited commit introduced unwanted behavior. The intent for the commit was to be able to detect carrier loss/gain for just the NIC connected to the BMC. The unwanted effect is a carrier loss for auxiliary paths also causes the BMC to lose carrier. The BMC never regains carrier despite the secondary NIC regaining a link. This change, when merged, needs to be backported to stable kernels. 5.4-stable, 5.10-stable, 5.15-stable, 6.1-stable, 6.5-stable Fixes: 3780bb29311e ("ncsi: Propagate carrier gain/loss events to the NCSI controller") CC: stable@vger.kernel.org Signed-off-by: Johnathan Mantey Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman