kernel/linux.git/net/mptcp, branch v6.1.174

Revert "mptcp: add needs_id for netlink appending addr"

2026-04-18T08:35:57+00:00

[ Upstream commit 8e2760eaab778494fc1fa257031e0e1799647f46 ] This commit was originally adding the ability to add MPTCP endpoints with ID 0 by accident. The in-kernel PM, handling MPTCP endpoints at the net namespace level, is not supposed to handle endpoints with such ID, because this ID 0 is reserved to the initial subflow, as mentioned in the MPTCPv1 protocol [1], a per-connection setting. Note that 'ip mptcp endpoint add id 0' stops early with an error, but other tools might still request the in-kernel PM to create MPTCP endpoints with this restricted ID 0. In other words, it was wrong to call the mptcp_pm_has_addr_attr_id helper to check whether the address ID attribute is set: if it was set to 0, a new MPTCP endpoint would be created with ID 0, which is not expected, and might cause various issues later. Fixes: 584f38942626 ("mptcp: add needs_id for netlink appending addr") Cc: stable@vger.kernel.org Link: https://datatracker.ietf.org/doc/html/rfc8684#section-3.2-9 [1] Reviewed-by: Geliang Tang Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260407-net-mptcp-revert-pm-needs-id-v2-1-7a25cbc324f8@kernel.org Signed-off-by: Jakub Kicinski [ applied changes to net/mptcp/pm_netlink.c instead of renamed net/mptcp/pm_kernel.c ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mptcp: fix slab-use-after-free in __inet_lookup_established

2026-04-18T08:35:55+00:00

commit 9b55b253907e7431210483519c5ad711a37dafa1 upstream. The ehash table lookups are lockless and rely on SLAB_TYPESAFE_BY_RCU to guarantee socket memory stability during RCU read-side critical sections. Both tcp_prot and tcpv6_prot have their slab caches created with this flag via proto_register(). However, MPTCP's mptcp_subflow_init() copies tcpv6_prot into tcpv6_prot_override during inet_init() (fs_initcall, level 5), before inet6_init() (module_init/device_initcall, level 6) has called proto_register(&tcpv6_prot). At that point, tcpv6_prot.slab is still NULL, so tcpv6_prot_override.slab remains NULL permanently. This causes MPTCP v6 subflow child sockets to be allocated via kmalloc (falling into kmalloc-4k) instead of the TCPv6 slab cache. The kmalloc-4k cache lacks SLAB_TYPESAFE_BY_RCU, so when these sockets are freed without SOCK_RCU_FREE (which is cleared for child sockets by design), the memory can be immediately reused. Concurrent ehash lookups under rcu_read_lock can then access freed memory, triggering a slab-use-after-free in __inet_lookup_established. Fix this by splitting the IPv6-specific initialization out of mptcp_subflow_init() into a new mptcp_subflow_v6_init(), called from mptcp_proto_v6_init() before protocol registration. This ensures tcpv6_prot_override.slab correctly inherits the SLAB_TYPESAFE_BY_RCU slab cache. Fixes: b19bc2945b40 ("mptcp: implement delegated actions") Cc: stable@vger.kernel.org Signed-off-by: Jiayuan Chen Reviewed-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260406031512.189159-1-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

MPTCP: fix lock class name family in pm_nl_create_listen_socket

2026-04-11T12:16:36+00:00

commit 7ab4a7c5d969642782b8a5b608da0dd02aa9f229 upstream. In mptcp_pm_nl_create_listen_socket(), use entry->addr.family instead of sk->sk_family for lock class setup. The 'sk' parameter is a netlink socket, not the MPTCP subflow socket being created. Fixes: cee4034a3db1 ("mptcp: fix lockdep false positive in mptcp_pm_nl_create_listen_socket()") Signed-off-by: Li Xiasong Reviewed-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260319112159.3118874-1-lixiasong1@huawei.com Signed-off-by: Jakub Kicinski [ Conflict in pm_kernel.c, because commit 8617e85e04bd ("mptcp: pm: split in-kernel PM specific code") is not in this version, and moves code from pm_netlink.c to pm_kernel.c. ] Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Greg Kroah-Hartman

mptcp: pm: in-kernel: always set ID as avail when rm endp

2026-03-25T10:03:25+00:00

commit d191101dee25567c2af3b28565f45346c33d65f5 upstream. Syzkaller managed to find a combination of actions that was generating this warning: WARNING: net/mptcp/pm_kernel.c:1074 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538, CPU#1: syz.7.48/2535 Modules linked in: CPU: 1 UID: 0 PID: 2535 Comm: syz.7.48 Not tainted 6.18.0-03987-gea5f5e676cf5 #17 PREEMPT(voluntary) Hardware name: QEMU Ubuntu 25.10 PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline] RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline] RIP: 0010:mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline] RIP: 0010:mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538 Code: 89 c7 e8 c5 8c 73 fe e9 f7 fd ff ff 49 83 ef 80 e8 b7 8c 73 fe 4c 89 ff be 03 00 00 00 e8 4a 29 e3 fe eb ac e8 a3 8c 73 fe 90 <0f> 0b 90 e9 3d ff ff ff e8 95 8c 73 fe b8 a1 ff ff ff eb 1a e8 89 RSP: 0018:ffffc9001535b820 EFLAGS: 00010287 netdevsim0: tun_chr_ioctl cmd 1074025677 RAX: ffffffff82da294d RBX: 0000000000000001 RCX: 0000000000080000 RDX: ffffc900096d0000 RSI: 00000000000006d6 RDI: 00000000000006d7 netdevsim0: linktype set to 823 RBP: ffff88802cdb2240 R08: 00000000000104ae R09: ffffffffffffffff R10: ffffffff82da27d4 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88801246d8c0 R14: ffffc9001535b8b8 R15: ffff88802cdb1800 FS: 00007fc6ac5a76c0(0000) GS:ffff8880f90c8000(0000) knlGS:0000000000000000 netlink: 'syz.3.50': attribute type 5 has an invalid length. CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 netlink: 1232 bytes leftover after parsing attributes in process `syz.3.50'. CR2: 0000200000010000 CR3: 0000000025b1a000 CR4: 0000000000350ef0 Call Trace: mptcp_pm_set_flags net/mptcp/pm_netlink.c:277 [inline] mptcp_pm_nl_set_flags_doit+0x1d7/0x210 net/mptcp/pm_netlink.c:282 genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x4ab/0x5b0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0xc9/0xf0 net/socket.c:733 ____sys_sendmsg+0x272/0x3b0 net/socket.c:2608 ___sys_sendmsg+0x2de/0x320 net/socket.c:2662 __sys_sendmsg net/socket.c:2694 [inline] __do_sys_sendmsg net/socket.c:2699 [inline] __se_sys_sendmsg net/socket.c:2697 [inline] __x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2697 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xed/0x360 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fc6adb66f6d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6ac5a6ff8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fc6addf5fa0 RCX: 00007fc6adb66f6d RDX: 0000000000048084 RSI: 00002000000002c0 RDI: 000000000000000e RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 netlink: 'syz.5.51': attribute type 2 has an invalid length. R13: 00007fff25e91fe0 R14: 00007fc6ac5a7ce4 R15: 00007fff25e920d7 The actions that caused that seem to be: - Create an MPTCP endpoint for address A without any flags - Create a new MPTCP connection from address A - Remove the MPTCP endpoint: the corresponding subflows will be removed - Recreate the endpoint with the same ID, but with the subflow flag - Change the same endpoint to add the fullmesh flag In this case, msk->pm.local_addr_used has been kept to 0 as expected, but the corresponding bit in msk->pm.id_avail_bitmap was still unset after having removed the endpoint, causing the splat later on. When removing an endpoint, the corresponding endpoint ID was only marked as available for "signal" types with an announced address, plus all "subflow" types, but not the other types like an endpoint corresponding to the initial subflow. In these cases, re-creating an endpoint with the same ID didn't signal/create anything. Here, adding the fullmesh flag was creating the splat when calling __mark_subflow_endp_available() from mptcp_pm_nl_fullmesh(), because msk->pm.local_addr_used was set to 0 while the ID was marked as used. To fix this issue, the corresponding bit in msk->pm.id_avail_bitmap can always be set as available when removing an MPTCP in-kernel endpoint. In other words, moving the call to __set_bit() to do it in all cases, except for "subflow" types where this bit is handled in a dedicated helper. Note: instead of adding a new spin_(un)lock_bh that would be taken in all cases, do all the actions requiring the spin lock under the same block. This modification potentially fixes another issue reported by syzbot, see [1]. But without a reproducer or more details about what exactly happened before, it is hard to confirm. Fixes: e255683c06df ("mptcp: pm: re-using ID of unused removed ADD_ADDR") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/606 Reported-by: syzbot+f56f7d56e2c6e11a01b6@syzkaller.appspotmail.com Closes: https://lore.kernel.org/68fcfc4a.050a0220.346f24.02fb.GAE@google.com [1] Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260205-net-mptcp-misc-fixes-6-19-rc8-v2-1-c2720ce75c34@kernel.org Signed-off-by: Jakub Kicinski [ Conflict in pm_netlink.c, because commit 8617e85e04bd ("mptcp: pm: split in-kernel PM specific code") is not in this version, and move code from pm_netlink.c to pm_kernel.c. Also, commit 636113918508 ("mptcp: pm: remove '_nl' from mptcp_pm_nl_rm_addr_received") renamed mptcp_pm_nl_rm_subflow_received() to mptcp_pm_rm_subflow(). Apart from that, the same patch can be applied in pm_netlink.c. ] Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Greg Kroah-Hartman

mptcp: pm: in-kernel: always mark signal+subflow endp as used

2026-03-25T10:03:14+00:00

[ Upstream commit 579a752464a64cb5f9139102f0e6b90a1f595ceb ] Syzkaller managed to find a combination of actions that was generating this warning: msk->pm.local_addr_used == 0 WARNING: net/mptcp/pm_kernel.c:1071 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline], CPU#1: syz.2.17/961 WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline], CPU#1: syz.2.17/961 WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210, CPU#1: syz.2.17/961 Modules linked in: CPU: 1 UID: 0 PID: 961 Comm: syz.2.17 Not tainted 6.19.0-08368-gfafda3b4b06b #22 PREEMPT(full) Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.17.0-debian-1.17.0-1build1 04/01/2014 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline] RIP: 0010:mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline] RIP: 0010:mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210 Code: 89 c5 e8 46 30 6f fe e9 21 fd ff ff 49 83 ed 80 e8 38 30 6f fe 4c 89 ef be 03 00 00 00 e8 db 49 df fe eb ac e8 24 30 6f fe 90 <0f> 0b 90 e9 1d ff ff ff e8 16 30 6f fe eb 05 e8 0f 30 6f fe e8 9a RSP: 0018:ffffc90001663880 EFLAGS: 00010293 RAX: ffffffff82de1a6c RBX: 0000000000000000 RCX: ffff88800722b500 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8880158b22d0 R08: 0000000000010425 R09: ffffffffffffffff R10: ffffffff82de18ba R11: 0000000000000000 R12: ffff88800641a640 R13: ffff8880158b1880 R14: ffff88801ec3c900 R15: ffff88800641a650 FS: 00005555722c3500(0000) GS:ffff8880f909d000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f66346e0f60 CR3: 000000001607c000 CR4: 0000000000350ef0 Call Trace: genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x4aa/0x5b0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0xc9/0xf0 net/socket.c:742 ____sys_sendmsg+0x272/0x3b0 net/socket.c:2592 ___sys_sendmsg+0x2de/0x320 net/socket.c:2646 __sys_sendmsg net/socket.c:2678 [inline] __do_sys_sendmsg net/socket.c:2683 [inline] __se_sys_sendmsg net/socket.c:2681 [inline] __x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2681 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x143/0x440 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f66346f826d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc83d8bdc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6634985fa0 RCX: 00007f66346f826d RDX: 00000000040000b0 RSI: 0000200000000740 RDI: 0000000000000007 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6634985fa8 R13: 00007f6634985fac R14: 0000000000000000 R15: 0000000000001770 The actions that caused that seem to be: - Set the MPTCP subflows limit to 0 - Create an MPTCP endpoint with both the 'signal' and 'subflow' flags - Create a new MPTCP connection from a different address: an ADD_ADDR linked to the MPTCP endpoint will be sent ('signal' flag), but no subflows is initiated ('subflow' flag) - Remove the MPTCP endpoint In this case, msk->pm.local_addr_used has been kept to 0 -- because no subflows have been created -- but the corresponding bit in msk->pm.id_avail_bitmap has been cleared when the ADD_ADDR has been sent. This later causes a splat when removing the MPTCP endpoint because msk->pm.local_addr_used has been kept to 0. Now, if an endpoint has both the signal and subflow flags, but it is not possible to create subflows because of the limits or the c-flag case, then the local endpoint counter is still incremented: the endpoint is used at the end. This avoids issues later when removing the endpoint and calling __mark_subflow_endp_available(), which expects msk->pm.local_addr_used to have been previously incremented if the endpoint was marked as used according to msk->pm.id_avail_bitmap. Note that signal_and_subflow variable is reset to false when the limits and the c-flag case allows subflows creation. Also, local_addr_used is only incremented for non ID0 subflows. Fixes: 85df533a787b ("mptcp: pm: do not ignore 'subflow' if 'signal' flag is also set") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/613 Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-4-4b5462b6f016@kernel.org Signed-off-by: Jakub Kicinski [ pm_kernel.c => pm_netlink.c ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mptcp: pm: avoid sending RM_ADDR over same subflow

2026-03-25T10:03:14+00:00

[ Upstream commit fb8d0bccb221080630efcd9660c9f9349e53cc9e ] RM_ADDR are sent over an active subflow, the first one in the subflows list. There is then a high chance the initial subflow is picked. With the in-kernel PM, when an endpoint is removed, a RM_ADDR is sent, then linked subflows are closed. This is done for each active MPTCP connection. MPTCP endpoints are likely removed because the attached network is no longer available or usable. In this case, it is better to avoid sending this RM_ADDR over the subflow that is going to be removed, but prefer sending it over another active and non stale subflow, if any. This modification avoids situations where the other end is not notified when a subflow is no longer usable: typically when the endpoint linked to the initial subflow is removed, especially on the server side. Fixes: 8dd5efb1f91b ("mptcp: send ack for rm_addr") Cc: stable@vger.kernel.org Reported-by: Frank Lorenz Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/612 Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-2-4b5462b6f016@kernel.org Signed-off-by: Jakub Kicinski [ adapted to _nl-prefixed function names in pm_netlink.c and omitted stale subflow fallback ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mptcp: fix race in mptcp_pm_nl_flush_addrs_doit()

2026-02-19T15:25:20+00:00

commit e2a9eeb69f7d4ca4cf4c70463af77664fdb6ab1d upstream. syzbot and Eulgyu Kim reported crashes in mptcp_pm_nl_get_local_id() and/or mptcp_pm_nl_is_backup() Root cause is list_splice_init() in mptcp_pm_nl_flush_addrs_doit() which is not RCU ready. list_splice_init_rcu() can not be called here while holding pernet->lock spinlock. Many thanks to Eulgyu Kim for providing a repro and testing our patches. Fixes: 141694df6573 ("mptcp: remove address when netlink flushes addrs") Signed-off-by: Eric Dumazet Reported-by: syzbot+5498a510ff9de39d37da@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/6970a46d.a00a0220.3ad28e.5cf0.GAE@google.com/T/ Reported-by: Eulgyu Kim Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/611 Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260124-net-mptcp-race_nl_flush_addrs-v3-1-b2dc1b613e9d@kernel.org Signed-off-by: Jakub Kicinski [ Conflicts because the code has been moved from pm_netlink.c to pm_kernel.c later on in commit 8617e85e04bd ("mptcp: pm: split in-kernel PM specific code"). The same modifications can be applied in pm_netlink.c with one exception, because 'pernet->local_addr_list' has been renamed to 'pernet->endp_list' in commit 35e71e43a56d ("mptcp: pm: in-kernel: rename 'local_addr_list' to 'endp_list'"). The previous name is then still being used in this version. Also, another conflict is caused by commit 7bcf4d8022f9 ("mptcp: pm: rename helpers linked to 'flush'") which is not in this version: mptcp_nl_remove_addrs_list() has been renamed to mptcp_nl_flush_addrs_list(). The previous name has then been kept. ] Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Greg Kroah-Hartman

mptcp: ensure context reset on disconnect()

2026-02-19T15:25:18+00:00

commit 86730ac255b0497a272704de9a1df559f5d6602e upstream. After the blamed commit below, if the MPC subflow is already in TCP_CLOSE status or has fallback to TCP at mptcp_disconnect() time, mptcp_do_fastclose() skips setting the `send_fastclose flag` and the later __mptcp_close_ssk() does not reset anymore the related subflow context. Any later connection will be created with both the `request_mptcp` flag and the msk-level fallback status off (it is unconditionally cleared at MPTCP disconnect time), leading to a warning in subflow_data_ready(): WARNING: CPU: 26 PID: 8996 at net/mptcp/subflow.c:1519 subflow_data_ready (net/mptcp/subflow.c:1519 (discriminator 13)) Modules linked in: CPU: 26 UID: 0 PID: 8996 Comm: syz.22.39 Not tainted 6.18.0-rc7-05427-g11fc074f6c36 #1 PREEMPT(voluntary) Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 RIP: 0010:subflow_data_ready (net/mptcp/subflow.c:1519 (discriminator 13)) Code: 90 0f 0b 90 90 e9 04 fe ff ff e8 b7 1e f5 fe 89 ee bf 07 00 00 00 e8 db 19 f5 fe 83 fd 07 0f 84 35 ff ff ff e8 9d 1e f5 fe 90 <0f> 0b 90 e9 27 ff ff ff e8 8f 1e f5 fe 4c 89 e7 48 89 de e8 14 09 RSP: 0018:ffffc9002646fb30 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88813b218000 RCX: ffffffff825c8435 RDX: ffff8881300b3580 RSI: ffffffff825c8443 RDI: 0000000000000005 RBP: 000000000000000b R08: ffffffff825c8435 R09: 000000000000000b R10: 0000000000000005 R11: 0000000000000007 R12: ffff888131ac0000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f88330af6c0(0000) GS:ffff888a93dd2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f88330aefe8 CR3: 000000010ff59000 CR4: 0000000000350ef0 Call Trace: tcp_data_ready (net/ipv4/tcp_input.c:5356) tcp_data_queue (net/ipv4/tcp_input.c:5445) tcp_rcv_state_process (net/ipv4/tcp_input.c:7165) tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1955) __release_sock (include/net/sock.h:1158 (discriminator 6) net/core/sock.c:3180 (discriminator 6)) release_sock (net/core/sock.c:3737) mptcp_sendmsg (net/mptcp/protocol.c:1763 net/mptcp/protocol.c:1857) inet_sendmsg (net/ipv4/af_inet.c:853 (discriminator 7)) __sys_sendto (net/socket.c:727 (discriminator 15) net/socket.c:742 (discriminator 15) net/socket.c:2244 (discriminator 15)) __x64_sys_sendto (net/socket.c:2247) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f883326702d Address the issue setting an explicit `fastclosing` flag at fastclose time, and checking such flag after mptcp_do_fastclose(). Fixes: ae155060247b ("mptcp: fix duplicate reset on fastclose") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251212-net-mptcp-subflow_data_ready-warn-v1-2-d1f9fd1c36c8@kernel.org Signed-off-by: Paolo Abeni [ Conflicts in protocol.[ch] because the context has changed. ] Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Greg Kroah-Hartman

mptcp: schedule rtx timer only after pushing data

2026-02-19T15:25:18+00:00

commit 2ea6190f42d0416a4310e60a7fcb0b49fcbbd4fb upstream. The MPTCP protocol usually schedule the retransmission timer only when there is some chances for such retransmissions to happen. With a notable exception: __mptcp_push_pending() currently schedule such timer unconditionally, potentially leading to unnecessary rtx timer expiration. The issue is present since the blamed commit below but become easily reproducible after commit 27b0e701d387 ("mptcp: drop bogus optimization in __mptcp_check_push()") Fixes: 33d41c9cd74c ("mptcp: more accurate timeout") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-3-9e4781a6c1b8@kernel.org Signed-off-by: Jakub Kicinski [ Conflicts in protocol.c, because commit 0fa1b3783a17 ("mptcp: use get_send wrapper") is not in this version, and is changing the context. The same modification can still be applied. ] Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Greg Kroah-Hartman

mptcp: avoid dup SUB_CLOSED events after disconnect

2026-02-06T15:44:25+00:00

[ Upstream commit 280d654324e33f8e6e3641f76764694c7b64c5db ] In case of subflow disconnect(), which can also happen with the first subflow in case of errors like timeout or reset, mptcp_subflow_ctx_reset will reset most fields from the mptcp_subflow_context structure, including close_event_done. Then, when another subflow is closed, yet another SUB_CLOSED event for the disconnected initial subflow is sent. Because of the previous reset, there are no source address and destination port. A solution is then to also check the subflow's local id: it shouldn't be negative anyway. Another solution would be not to reset subflow->close_event_done at disconnect time, but when reused. But then, probably the whole reset could be done when being reused. Let's not change this logic, similar to TCP with tcp_disconnect(). Fixes: d82809b6c5f2 ("mptcp: avoid duplicated SUB_CLOSED events") Cc: stable@vger.kernel.org Reported-by: Marco Angaroni Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/603 Reviewed-by: Geliang Tang Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-1-7f71e1bc4feb@kernel.org Signed-off-by: Jakub Kicinski [ Adjust context ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman