kernel/linux.git/net/mptcp/protocol.h, branch v6.12.97

mptcp: add-addr: always drop other suboptions

2026-06-19T11:42:30+00:00

commit bd34fa0257261b76964df1c98f44b3cb4ee14620 upstream. When an ADD_ADDR needs to be sent, it could be prepared if there is enough remaining space and even if the packet is not a pure ACK. But it would be dropped soon after. Indeed, in mptcp_pm_add_addr_signal(), there is enough space to fit a DSS of 20 octets and an ADD_ADDR echo containing an IPv4 address on 8 octets for example. In this case, the packet would be prepared, the MPTCP_ADD_ADDR_ECHO bit would be removed from pm->addr_signal, but the option would be silently dropped in mptcp_established_options_add_addr() not to override DSS info in the union from 'struct mptcp_out_options', and also because mptcp_write_options() will enforce mutually exclusion with DSS. Instead, don't even try to send an ADD_ADDR if it is not a pure ACK. Retry for each new packet until a pure-ACK is emitted. That's fine to do that, because each time an ADD_ADDR (echo) is scheduled, a pure ACK is queued. This also simplifies the code, and the skb checks can be done earlier, before the lock. Note: also, since commit 6d0060f600ad ("mptcp: Write MPTCP DSS headers to outgoing data packets"), opts->ahmac would not have been set to 0 when other suboptions were not dropped, and when sending an ADD_ADDR echo. That would have resulted in sending an ADD_ADDR using garbage info, where there was not enough space, instead of an echo one without the ADD_ADDR HMAC. Fixes: 1bff1e43a30e ("mptcp: optimize out option generation") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-11-856831229976@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

mptcp: handle first subflow closing consistently

2026-06-09T10:26:03+00:00

[ Upstream commit 0eeb372deebce6c25b9afc09e35d6c75a744299a ] Currently, as soon as the PM closes a subflow, the msk stops accepting data from it, even if the TCP socket could be still formally open in the incoming direction, with the notable exception of the first subflow. The root cause of such behavior is that code currently piggy back two separate semantic on the subflow->disposable bit: the subflow context must be released and that the subflow must stop accepting incoming data. The first subflow is never disposed, so it also never stop accepting incoming data. Use a separate bit to mark the latter status and set such bit in __mptcp_close_ssk() for all subflows. Beyond making per subflow behaviour more consistent this will also simplify the next patch. Signed-off-by: Paolo Abeni Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251121-net-next-mptcp-memcg-backlog-imp-v1-11-1f34b6c1e0b1@kernel.org Signed-off-by: Jakub Kicinski Stable-dep-of: 50c2d91c5dfa ("mptcp: do not drop partial packets") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mptcp: drop __mptcp_fastopen_gen_msk_ackseq()

2026-05-23T11:05:01+00:00

[ Upstream commit f03afb3aeb9d81f6c5ab728a61a040012923e3b3 ] When we will move the whole RX path under the msk socket lock, updating the already queued skb for passive fastopen socket at 3rd ack time will be extremely painful and race prone The map_seq for already enqueued skbs is used only to allow correct coalescing with later data; preventing collapsing to the first skb of a fastopen connect we can completely remove the __mptcp_fastopen_gen_msk_ackseq() helper. Before dropping this helper, a new item had to be added to the mptcp_skb_cb structure. Because this item will be frequently tested in the fast path -- almost on every packet -- and because there is free space there, a single byte is used instead of a bitfield. This micro optimisation slightly reduces the number of CPU operations to do the associated check. Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20250218-net-next-mptcp-rx-path-refactor-v1-2-4a47d90d7998@kernel.org Signed-off-by: Jakub Kicinski Stable-dep-of: 6254a16d6f0c ("mptcp: fix rx timestamp corruption on fastopen") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mptcp: fix slab-use-after-free in __inet_lookup_established

2026-04-18T08:41:55+00:00

commit 9b55b253907e7431210483519c5ad711a37dafa1 upstream. The ehash table lookups are lockless and rely on SLAB_TYPESAFE_BY_RCU to guarantee socket memory stability during RCU read-side critical sections. Both tcp_prot and tcpv6_prot have their slab caches created with this flag via proto_register(). However, MPTCP's mptcp_subflow_init() copies tcpv6_prot into tcpv6_prot_override during inet_init() (fs_initcall, level 5), before inet6_init() (module_init/device_initcall, level 6) has called proto_register(&tcpv6_prot). At that point, tcpv6_prot.slab is still NULL, so tcpv6_prot_override.slab remains NULL permanently. This causes MPTCP v6 subflow child sockets to be allocated via kmalloc (falling into kmalloc-4k) instead of the TCPv6 slab cache. The kmalloc-4k cache lacks SLAB_TYPESAFE_BY_RCU, so when these sockets are freed without SOCK_RCU_FREE (which is cleared for child sockets by design), the memory can be immediately reused. Concurrent ehash lookups under rcu_read_lock can then access freed memory, triggering a slab-use-after-free in __inet_lookup_established. Fix this by splitting the IPv6-specific initialization out of mptcp_subflow_init() into a new mptcp_subflow_v6_init(), called from mptcp_proto_v6_init() before protocol registration. This ensures tcpv6_prot_override.slab correctly inherits the SLAB_TYPESAFE_BY_RCU slab cache. Fixes: b19bc2945b40 ("mptcp: implement delegated actions") Cc: stable@vger.kernel.org Signed-off-by: Jiayuan Chen Reviewed-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260406031512.189159-1-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

mptcp: pm: avoid sending RM_ADDR over same subflow

2026-03-25T10:08:41+00:00

[ Upstream commit fb8d0bccb221080630efcd9660c9f9349e53cc9e ] RM_ADDR are sent over an active subflow, the first one in the subflows list. There is then a high chance the initial subflow is picked. With the in-kernel PM, when an endpoint is removed, a RM_ADDR is sent, then linked subflows are closed. This is done for each active MPTCP connection. MPTCP endpoints are likely removed because the attached network is no longer available or usable. In this case, it is better to avoid sending this RM_ADDR over the subflow that is going to be removed, but prefer sending it over another active and non stale subflow, if any. This modification avoids situations where the other end is not notified when a subflow is no longer usable: typically when the endpoint linked to the initial subflow is removed, especially on the server side. Fixes: 8dd5efb1f91b ("mptcp: send ack for rm_addr") Cc: stable@vger.kernel.org Reported-by: Frank Lorenz Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/612 Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-2-4b5462b6f016@kernel.org Signed-off-by: Jakub Kicinski [ adapted to _nl-prefixed function names in pm_netlink.c and omitted stale subflow fallback ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mptcp: fix receive space timestamp initialization

2026-03-04T12:20:08+00:00

[ Upstream commit 70274765fef555af92a1532d5bd5450c691fca9d ] MPTCP initialize the receive buffer stamp in mptcp_rcv_space_init(), using the provided subflow stamp. Such helper is invoked in several places; for passive sockets, space init happened at clone time. In such scenario, MPTCP ends-up accesses the subflow stamp before its initialization, leading to quite randomic timing for the first receive buffer auto-tune event, as the timestamp for newly created subflow is not refreshed there. Fix the issue moving the stamp initialization out of the mentioned helper, at the data transfer start, and always using a fresh timestamp. Fixes: 013e3179dbd2 ("mptcp: fix rcv space initialization") Reviewed-by: Mat Martineau Signed-off-by: Paolo Abeni Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-2-31ec8bfc56d1@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

mptcp: ensure context reset on disconnect()

2026-01-11T14:25:20+00:00

[ Upstream commit 86730ac255b0497a272704de9a1df559f5d6602e ] After the blamed commit below, if the MPC subflow is already in TCP_CLOSE status or has fallback to TCP at mptcp_disconnect() time, mptcp_do_fastclose() skips setting the `send_fastclose flag` and the later __mptcp_close_ssk() does not reset anymore the related subflow context. Any later connection will be created with both the `request_mptcp` flag and the msk-level fallback status off (it is unconditionally cleared at MPTCP disconnect time), leading to a warning in subflow_data_ready(): WARNING: CPU: 26 PID: 8996 at net/mptcp/subflow.c:1519 subflow_data_ready (net/mptcp/subflow.c:1519 (discriminator 13)) Modules linked in: CPU: 26 UID: 0 PID: 8996 Comm: syz.22.39 Not tainted 6.18.0-rc7-05427-g11fc074f6c36 #1 PREEMPT(voluntary) Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 RIP: 0010:subflow_data_ready (net/mptcp/subflow.c:1519 (discriminator 13)) Code: 90 0f 0b 90 90 e9 04 fe ff ff e8 b7 1e f5 fe 89 ee bf 07 00 00 00 e8 db 19 f5 fe 83 fd 07 0f 84 35 ff ff ff e8 9d 1e f5 fe 90 <0f> 0b 90 e9 27 ff ff ff e8 8f 1e f5 fe 4c 89 e7 48 89 de e8 14 09 RSP: 0018:ffffc9002646fb30 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88813b218000 RCX: ffffffff825c8435 RDX: ffff8881300b3580 RSI: ffffffff825c8443 RDI: 0000000000000005 RBP: 000000000000000b R08: ffffffff825c8435 R09: 000000000000000b R10: 0000000000000005 R11: 0000000000000007 R12: ffff888131ac0000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f88330af6c0(0000) GS:ffff888a93dd2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f88330aefe8 CR3: 000000010ff59000 CR4: 0000000000350ef0 Call Trace: tcp_data_ready (net/ipv4/tcp_input.c:5356) tcp_data_queue (net/ipv4/tcp_input.c:5445) tcp_rcv_state_process (net/ipv4/tcp_input.c:7165) tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1955) __release_sock (include/net/sock.h:1158 (discriminator 6) net/core/sock.c:3180 (discriminator 6)) release_sock (net/core/sock.c:3737) mptcp_sendmsg (net/mptcp/protocol.c:1763 net/mptcp/protocol.c:1857) inet_sendmsg (net/ipv4/af_inet.c:853 (discriminator 7)) __sys_sendto (net/socket.c:727 (discriminator 15) net/socket.c:742 (discriminator 15) net/socket.c:2244 (discriminator 15)) __x64_sys_sendto (net/socket.c:2247) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f883326702d Address the issue setting an explicit `fastclosing` flag at fastclose time, and checking such flag after mptcp_do_fastclose(). Fixes: ae155060247b ("mptcp: fix duplicate reset on fastclose") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251212-net-mptcp-subflow_data_ready-warn-v1-2-d1f9fd1c36c8@kernel.org Signed-off-by: Paolo Abeni [ Adjust context ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mptcp: fallback earlier on simult connection

2026-01-11T14:25:19+00:00

[ Upstream commit 71154bbe49423128c1c8577b6576de1ed6836830 ] Syzkaller reports a simult-connect race leading to inconsistent fallback status: WARNING: CPU: 3 PID: 33 at net/mptcp/subflow.c:1515 subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515 Modules linked in: CPU: 3 UID: 0 PID: 33 Comm: ksoftirqd/3 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515 Code: 89 ee e8 78 61 3c f6 40 84 ed 75 21 e8 8e 66 3c f6 44 89 fe bf 07 00 00 00 e8 c1 61 3c f6 41 83 ff 07 74 09 e8 76 66 3c f6 90 <0f> 0b 90 e8 6d 66 3c f6 48 89 df e8 e5 ad ff ff 31 ff 89 c5 89 c6 RSP: 0018:ffffc900006cf338 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888031acd100 RCX: ffffffff8b7f2abf RDX: ffff88801e6ea440 RSI: ffffffff8b7f2aca RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000007 R10: 0000000000000004 R11: 0000000000002c10 R12: ffff88802ba69900 R13: 1ffff920000d9e67 R14: ffff888046f81800 R15: 0000000000000004 FS: 0000000000000000(0000) GS:ffff8880d69bc000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000560fc0ca1670 CR3: 0000000032c3a000 CR4: 0000000000352ef0 Call Trace: tcp_data_queue+0x13b0/0x4f90 net/ipv4/tcp_input.c:5197 tcp_rcv_state_process+0xfdf/0x4ec0 net/ipv4/tcp_input.c:6922 tcp_v6_do_rcv+0x492/0x1740 net/ipv6/tcp_ipv6.c:1672 tcp_v6_rcv+0x2976/0x41e0 net/ipv6/tcp_ipv6.c:1918 ip6_protocol_deliver_rcu+0x188/0x1520 net/ipv6/ip6_input.c:438 ip6_input_finish+0x1e4/0x4b0 net/ipv6/ip6_input.c:489 NF_HOOK include/linux/netfilter.h:318 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ip6_input+0x105/0x2f0 net/ipv6/ip6_input.c:500 dst_input include/net/dst.h:471 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK include/linux/netfilter.h:318 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x264/0x650 net/ipv6/ip6_input.c:311 __netif_receive_skb_one_core+0x12d/0x1e0 net/core/dev.c:5979 __netif_receive_skb+0x1d/0x160 net/core/dev.c:6092 process_backlog+0x442/0x15e0 net/core/dev.c:6444 __napi_poll.constprop.0+0xba/0x550 net/core/dev.c:7494 napi_poll net/core/dev.c:7557 [inline] net_rx_action+0xa9f/0xfe0 net/core/dev.c:7684 handle_softirqs+0x216/0x8e0 kernel/softirq.c:579 run_ksoftirqd kernel/softirq.c:968 [inline] run_ksoftirqd+0x3a/0x60 kernel/softirq.c:960 smpboot_thread_fn+0x3f7/0xae0 kernel/smpboot.c:160 kthread+0x3c2/0x780 kernel/kthread.c:463 ret_from_fork+0x5d7/0x6f0 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 The TCP subflow can process the simult-connect syn-ack packet after transitioning to TCP_FIN1 state, bypassing the MPTCP fallback check, as the sk_state_change() callback is not invoked for * -> FIN_WAIT1 transitions. That will move the msk socket to an inconsistent status and the next incoming data will hit the reported splat. Close the race moving the simult-fallback check at the earliest possible stage - that is at syn-ack generation time. About the fixes tags: [2] was supposed to also fix this issue introduced by [3]. [1] is required as a dependence: it was not explicitly marked as a fix, but it is one and it has already been backported before [3]. In other words, this commit should be backported up to [3], including [2] and [1] if that's not already there. Fixes: 23e89e8ee7be ("tcp: Don't drop SYN+ACK for simultaneous connect().") [1] Fixes: 4fd19a307016 ("mptcp: fix inconsistent state on fastopen race") [2] Fixes: 1e777f39b4d7 ("mptcp: add MSG_FASTOPEN sendmsg flag support") [3] Cc: stable@vger.kernel.org Reported-by: syzbot+0ff6b771b4f7a5bce83b@syzkaller.appspotmail.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/586 Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251212-net-mptcp-subflow_data_ready-warn-v1-1-d1f9fd1c36c8@kernel.org Signed-off-by: Paolo Abeni [ adapted mptcp_try_fallback() call ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mptcp: decouple mptcp fastclose from tcp close

2025-12-01T10:43:27+00:00

commit fff0c87996672816a84c3386797a5e69751c5888 upstream. With the current fastclose implementation, the mptcp_do_fastclose() helper is in charge of two distinct actions: send the fastclose reset and cleanup the subflows. Formally decouple the two steps, ensuring that mptcp explicitly closes all the subflows after the mentioned helper. This will make the upcoming fix simpler, and allows dropping the 2nd argument from mptcp_destroy_common(). The Fixes tag is then the same as in the next commit to help with the backports. Fixes: d21f83485518 ("mptcp: use fastclose on more edge scenarios") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni Reviewed-by: Geliang Tang Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-5-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

mptcp: avoid unneeded subflow-level drops

2025-12-01T10:43:26+00:00

commit 4f102d747cadd8f595f2b25882eed9bec1675fb1 upstream. The rcv window is shared among all the subflows. Currently, MPTCP sync the TCP-level rcv window with the MPTCP one at tcp_transmit_skb() time. The above means that incoming data may sporadically observe outdated TCP-level rcv window and being wrongly dropped by TCP. Address the issue checking for the edge condition before queuing the data at TCP level, and eventually syncing the rcv window as needed. Note that the issue is actually present from the very first MPTCP implementation, but backports older than the blamed commit below will range from impossible to useless. Before: $ nstat -n; sleep 1; nstat -z TcpExtBeyondWindow TcpExtBeyondWindow 14 0.0 After: $ nstat -n; sleep 1; nstat -z TcpExtBeyondWindow TcpExtBeyondWindow 0 0.0 Fixes: fa3fe2b15031 ("mptcp: track window announced to peer") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-2-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman