kernel/linux.git/net/mac80211/trace.h, branch v6.18.22

wifi: cfg80211/mac80211: Add support to get radio index

2025-06-24T13:19:27+00:00

Currently, per-radio attributes are set on per-phy basis, i.e., all the radios present in a wiphy will take attributes values sent from user. But each radio in a wiphy can get different values from userspace based on its requirement. To extend support to set per-radio attributes, add support to get radio index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX, to get user specified radio index for which attributes should be changed. Pass this to individual drivers, so that the drivers can use this radio index to change per-radio attributes when necessary. Currently, per-radio attributes identified are: NL80211_ATTR_WIPHY_TX_POWER_LEVEL NL80211_ATTR_WIPHY_ANTENNA_TX NL80211_ATTR_WIPHY_ANTENNA_RX NL80211_ATTR_WIPHY_RETRY_SHORT NL80211_ATTR_WIPHY_RETRY_LONG NL80211_ATTR_WIPHY_FRAG_THRESHOLD NL80211_ATTR_WIPHY_RTS_THRESHOLD NL80211_ATTR_WIPHY_COVERAGE_CLASS NL80211_ATTR_TXQ_LIMIT NL80211_ATTR_TXQ_MEMORY_LIMIT NL80211_ATTR_TXQ_QUANTUM By default, the radio index is set to -1. This means the attribute should be treated as a global configuration. If the user has not specified any index, then the radio index passed to individual drivers would be -1. This would indicate that the attribute applies to all radios in that wiphy. Signed-off-by: Roopni Devanathan Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com Signed-off-by: Johannes Berg

wifi: mac80211: add link_sta_statistics ops to fill link station statistics

2025-06-24T13:19:27+00:00

Currently, link station statistics for MLO are filled by mac80211. But there are some statistics that kept by mac80211 might not be accurate, so let the driver pre-fill the link statistics. The driver can fill the values (indicating which field is filled, by setting the filled bitmapin in link_station structure). Statistics that driver don't fill are filled by mac80211. Hence, add link_sta_statistics callback to fill link station statistics for MLO in sta_set_link_sinfo() by drivers. Signed-off-by: Sarika Sharma Link: https://patch.msgid.link/20250528054420.3050133-11-quic_sarishar@quicinc.com Signed-off-by: Johannes Berg

wifi: mac80211: improve stop/wake queue tracing

2025-01-13T14:26:44+00:00

Add the refcount. This can be useful when we want to understand why a queue stays stopped after it is woken. Signed-off-by: Emmanuel Grumbach Reviewed-by: Johannes Berg Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20250101070249.bd320c6e6702.I6ae0f19d922aea1f28236d72bf260acac428fc02@changeid Signed-off-by: Johannes Berg

wifi: mac80211: add some support for RX OMI power saving

2025-01-13T14:26:43+00:00

In order to save power, it can be desirable to change the RX operating mode using OMI to reduce the bandwidth. As the handshake must be done in the HTC+ field, it cannot be done by mac80211 directly, so expose functions to the driver to request and finalize the necessary updates. Note that RX OMI really only changes what the peer (AP) will transmit to us, but in order to use it to actually save some power (by reducing the listen bandwidth) we also update rate scaling and then the channel context's mindef accordingly. The updates are split into two in order to sequence them correctly, when reducing bandwidth first reduce the rate scaling and thus TX, then send OMI, then reduce the listen bandwidth (chandef); when increasing bandwidth this is the other way around. This also requires tracking in different variables which part is applicable already. Signed-off-by: Johannes Berg Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20250101070249.2c1a1934bd73.I4e90fd503504e37f9eac5bdae62e3f07e7071275@changeid Signed-off-by: Johannes Berg

wifi: mac80211: get tx power per link

2024-12-04T15:17:40+00:00

ML interfaces can have multiple affiliated links to it and hence there is a need to report tx power of specified link rather deflink. Add changes to report tx power of requested link from mac80211, also pass link id as an argument in get_tx_power op so that supported drivers can use it to report link's tx power. Co-developed-by: Aaradhana Sahu Signed-off-by: Aaradhana Sahu Signed-off-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20241125083217.216095-3-quic_ramess@quicinc.com Signed-off-by: Johannes Berg

wifi: mac80211: call rate_control_rate_update() for link STA

2024-10-23T14:43:27+00:00

In order to update the right link information, call the update rate_control_rate_update() with the right link_sta, and then pass that through to the driver's sta_rc_update() method. The software rate control still doesn't support it, but that'll be skipped by not having a rate control ref. Since it now operates on a link sta, rename the driver method. Signed-off-by: Johannes Berg Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20241007144851.5851b6b5fd41.Ibdf50d96afa4b761dd9b9dfd54a1147e77a75329@changeid Signed-off-by: Johannes Berg

wifi: mac80211: Add support to indicate that a new interface is to be added

2024-10-23T14:42:56+00:00

Add support to indicate to the driver that an interface is about to be added so that the driver could prepare its resources early if it needs so. Signed-off-by: Ilan Peer Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20241007144851.e0e8563e1c30.Ifccc96a46a347eb15752caefc9f4eff31f75ed47@changeid Signed-off-by: Johannes Berg

wifi: mac80211: inform the low level if drv_stop() is a suspend

2024-06-26T08:25:46+00:00

This will allow the low level driver to take different actions for different flows. Signed-off-by: Emmanuel Grumbach Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid Signed-off-by: Johannes Berg

tracing/treewide: Remove second parameter of __assign_str()

2024-05-23T00:14:47+00:00

With the rework of how the __string() handles dynamic strings where it saves off the source string in field in the helper structure[1], the assignment of that value to the trace event field is stored in the helper value and does not need to be passed in again. This means that with: __string(field, mystring) Which use to be assigned with __assign_str(field, mystring), no longer needs the second parameter and it is unused. With this, __assign_str() will now only get a single parameter. There's over 700 users of __assign_str() and because coccinelle does not handle the TRACE_EVENT() macro I ended up using the following sed script: git grep -l __assign_str | while read a ; do sed -e 's/$__assign_str([^,]*[^ ,]$ *,[^;]*/\1)/' $a > /tmp/test-file; mv /tmp/test-file $a; done I then searched for __assign_str() that did not end with ';' as those were multi line assignments that the sed script above would fail to catch. Note, the same updates will need to be done for: __assign_str_len() __assign_rel_str() __assign_rel_str_len() I tested this with both an allmodconfig and an allyesconfig (build only for both). [1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home Cc: Masami Hiramatsu Cc: Mathieu Desnoyers Cc: Linus Torvalds Cc: Julia Lawall Signed-off-by: Steven Rostedt (Google) Acked-by: Jani Nikula Acked-by: Christian König for the amdgpu parts. Acked-by: Thomas Hellström #for Acked-by: Rafael J. Wysocki # for thermal Acked-by: Takashi Iwai Acked-by: Darrick J. Wong # xfs Tested-by: Guenter Roeck

wifi: mac80211: pass link_id to channel switch ops

2024-03-04T13:33:54+00:00

For CSA to work correctly in multi-link scenarios, pass the link_id to the relevant callbacks. While at it, unify/deduplicate the tracing for them. Reviewed-by: Miriam Rachel Korenblit Reviewed-by: Emmanuel Grumbach Link: https://msgid.link/20240228095718.b7726635c054.I0be5d00af4acb48cfbd23a9dbf067f9aeb66469d@changeid Signed-off-by: Johannes Berg