kernel/linux.git/net/mac80211/trace.h, branch v6.12.91

wifi: mac80211: inform the low level if drv_stop() is a suspend

2024-06-26T08:25:46+00:00

This will allow the low level driver to take different actions for different flows. Signed-off-by: Emmanuel Grumbach Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid Signed-off-by: Johannes Berg

tracing/treewide: Remove second parameter of __assign_str()

2024-05-23T00:14:47+00:00

With the rework of how the __string() handles dynamic strings where it saves off the source string in field in the helper structure[1], the assignment of that value to the trace event field is stored in the helper value and does not need to be passed in again. This means that with: __string(field, mystring) Which use to be assigned with __assign_str(field, mystring), no longer needs the second parameter and it is unused. With this, __assign_str() will now only get a single parameter. There's over 700 users of __assign_str() and because coccinelle does not handle the TRACE_EVENT() macro I ended up using the following sed script: git grep -l __assign_str | while read a ; do sed -e 's/$__assign_str([^,]*[^ ,]$ *,[^;]*/\1)/' $a > /tmp/test-file; mv /tmp/test-file $a; done I then searched for __assign_str() that did not end with ';' as those were multi line assignments that the sed script above would fail to catch. Note, the same updates will need to be done for: __assign_str_len() __assign_rel_str() __assign_rel_str_len() I tested this with both an allmodconfig and an allyesconfig (build only for both). [1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home Cc: Masami Hiramatsu Cc: Mathieu Desnoyers Cc: Linus Torvalds Cc: Julia Lawall Signed-off-by: Steven Rostedt (Google) Acked-by: Jani Nikula Acked-by: Christian König for the amdgpu parts. Acked-by: Thomas Hellström #for Acked-by: Rafael J. Wysocki # for thermal Acked-by: Takashi Iwai Acked-by: Darrick J. Wong # xfs Tested-by: Guenter Roeck

wifi: mac80211: pass link_id to channel switch ops

2024-03-04T13:33:54+00:00

For CSA to work correctly in multi-link scenarios, pass the link_id to the relevant callbacks. While at it, unify/deduplicate the tracing for them. Reviewed-by: Miriam Rachel Korenblit Reviewed-by: Emmanuel Grumbach Link: https://msgid.link/20240228095718.b7726635c054.I0be5d00af4acb48cfbd23a9dbf067f9aeb66469d@changeid Signed-off-by: Johannes Berg

wifi: mac80211: support wider bandwidth OFDMA config

2024-02-08T12:07:37+00:00

EHT requires that stations are able to participate in wider bandwidth OFDMA, i.e. parse downlink OFDMA and uplink OFDMA triggers when they're not capable of (or not connected at) the (wider) bandwidth that the AP is using. This requires hardware configuration, since the entity responsible for parsing (possibly hardware) needs to know the AP bandwidth. To support this, change the channel request to have the AP's bandwidth for clients, and track that in the channel context in mac80211. This means that the same chandef might need to be split up into two different contexts, if the APs are different. Interfaces other than client are not participating in OFDMA the same way, so they don't request any AP setting. Note that this doesn't introduce any API to split a channel context, so that there are cases where this might lead to a disconnect, e.g. if there are two client interfaces using the same channel context, e.g. both 160 MHz connected to different 320 MHz APs, and one of the APs switches to 160 MHz. Note also there are possible cases where this can be optimised, e.g. when using the upper or lower 160 Mhz, but I haven't been able to really fully understand the spec and/or hardware limitations. If, for some reason, there are no hardware limits on this because the OFDMA (downlink/trigger) parsing is done in firmware and can take the transmitter into account, then drivers can set the new flag IEEE80211_VIF_IGNORE_OFDMA_WIDER_BW on interfaces to not have them request any AP bandwidth in the channel context and ignore this issue entirely. The bss_conf still contains the AP configuration (if any, i.e. EHT) in the chanreq. Link: https://msgid.link/20240129194108.d3d5b35dd783.I939d04674f4ff06f39934b1591c8d36a30ce74c2@changeid Signed-off-by: Johannes Berg

wifi: mac80211: introduce 'channel request'

2024-02-08T12:07:34+00:00

For channel contexts, mac80211 currently uses the cfg80211 chandef struct (control channel, center freq(s), width) to define towards drivers and internally how these behave. In fact, there are _two_ such structs used, where the min_def can reduce bandwidth according to the stations connected. Unfortunately, with EHT this is longer be sufficient, at least not for all hardware. EHT requires that non-AP STAs that are connected to an AP with a lower bandwidth than it (the AP) advertises (e.g. 160 MHz STA connected to 320 MHz AP) still be able to receive downlink OFDMA and respond to trigger frames for uplink OFDMA that specify the position and bandwidth for the non-AP STA relative to the channel the AP is using. Therefore, they need to be aware of this, and at least for some hardware (e.g. Intel) this awareness is in the hardware. As a result, use of the "same" channel may need to be split over two channel contexts where they differ by the AP being used. As a first step, introduce a concept of a channel request ('chanreq') for each interface, to control the context it requests. This step does nothing but reorganise the code, so that later the AP's chandef can be added to the request in order to handle the EHT case described above. Link: https://msgid.link/20240129194108.2e88e48bd2e9.I4256183debe975c5ed71621611206fdbb69ba330@changeid Signed-off-by: Johannes Berg

wifi: mac80211: trace SMPS requests from driver

2024-02-02T13:20:42+00:00

Even if there are a lot of possible ways drivers might call this, at least knowing when they do and with what settings can be useful. Add tracing for it. Link: https://msgid.link/20240129195435.b20d2ead2013.I8213e65c274451d523a3397519ac578c3ed2df4d@changeid [removed link-id contortions as suggested by Jeff] Signed-off-by: Johannes Berg

wifi: mac80211: process and save negotiated TID to Link mapping request

2024-01-26T08:39:48+00:00

An MLD may send TID-to-Link mapping request frame to negotiate TID to link mapping with a peer MLD. Support handling negotiated TID-to-Link mapping request frame by parsing the frame, asking the driver whether it supports the received mapping or not, and sending a TID-to-Link mapping response to the AP MLD. Theoretically, links that became inactive due to the received TID-to-Link mapping request, can be selected to be activated but this would require tearing down the negotiated TID-to-Link mapping, which is still not supported. Signed-off-by: Ayala Beker Reviewed-by: Johannes Berg Reviewed-by: Gregory Greenman Signed-off-by: Miri Korenblit Link: https://msgid.link/20240102213313.0bc1a24fcc9d.Ie72e47dc6f8c77d4a2f0947b775ef6367fe0edac@changeid Signed-off-by: Johannes Berg

wifi: mac80211: add a driver callback to check active_links

2023-12-21T19:35:15+00:00

During ieee80211_set_active_links() we do (among the others): 1. Call drv_change_vif_links() with both old_active and new_active 2. Unassign the chanctx for the removed link(s) (if any) 3. Assign chanctx to the added link(s) (if any) 4. Call drv_change_vif_links() with the new_active links bitmap The problem here is that during step #1 the driver doesn't know whether we will activate multiple links simultaneously or are just doing a link switch, so it can't check there if multiple links are supported/enabled. (Some of the drivers might enable/disable this option dynamically) And during step #3, in which the driver already knows that, returning an error code (for example when multiple links are not supported or disabled), will cause a warning, and we will still complete the transition to the new_active links. (It is hard to undo things in that stage, since we released channels etc.) Therefore add a driver callback to check if the desired new_active links will be supported by the driver or not. This callback will be called in the beginning of ieee80211_set_active_links() so we won't do anything before we are sure it is supported. Signed-off-by: Miri Korenblit Reviewed-by: Gregory Greenman Reviewed-by: Johannes Berg Link: https://msgid.link/20231220133549.64c4d70b33b8.I79708619be76b8ecd4ef3975205b8f903e24a2cd@changeid Signed-off-by: Johannes Berg

wifi: mac80211: add support for mld in ieee80211_chswitch_done

2023-09-11T10:31:31+00:00

This allows to finalize the CSA per link. In case the switch didn't work, tear down the MLD connection. Also pass the ieee80211_bss_conf to post_channel_switch to let the driver know which link completed the switch. Signed-off-by: Emmanuel Grumbach Signed-off-by: Gregory Greenman Link: https://lore.kernel.org/r/20230828130311.3d3eacc88436.Ic2d14e2285aa1646216a56806cfd4a8d0054437c@changeid Signed-off-by: Johannes Berg

wifi: mac80211: Replace strlcpy with strscpy

2023-06-14T10:32:19+00:00

strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). Direct replacement is safe here since LOCAL_ASSIGN is only used by TRACE macros and the return values are ignored. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh Reviewed-by: Kees Cook Link: https://lore.kernel.org/r/20230613003404.3538524-1-azeemshaikh38@gmail.com Signed-off-by: Johannes Berg