kernel/linux.git/net/mac80211/key.h, branch v5.18

mac80211: prevent mixed key and fragment cache attacks

2021-05-11T18:12:51+00:00

Simultaneously prevent mixed key attacks (CVE-2020-24587) and fragment cache attacks (CVE-2020-24586). This is accomplished by assigning a unique color to every key (per interface) and using this to track which key was used to decrypt a fragment. When reassembling frames, it is now checked whether all fragments were decrypted using the same key. To assure that fragment cache attacks are also prevented, the ID that is assigned to keys is unique even over (re)associations and (re)connects. This means fragments separated by a (re)association or (re)connect will not be reassembled. Because mac80211 now also prevents the reassembly of mixed encrypted and plaintext fragments, all cache attacks are prevented. Cc: stable@vger.kernel.org Signed-off-by: Mathy Vanhoef Link: https://lore.kernel.org/r/20210511200110.3f8290e59823.I622a67769ed39257327a362cfc09c812320eb979@changeid Signed-off-by: Johannes Berg

mac80211: Support BIGTK configuration for Beacon protection

2020-02-24T09:35:57+00:00

Extend mac80211 key configuration to support the new BIGTK with key index values 6 and 7. Support for actually protecting Beacon frames (adding the MME in AP mode and checking it in STA mode) is covered in separate commits. Signed-off-by: Jouni Malinen Link: https://lore.kernel.org/r/20200222132548.20835-3-jouni@codeaurora.org Signed-off-by: Johannes Berg

mac80211: clear crypto tx tailroom counter upon keys enable

2019-09-11T07:33:28+00:00

In case we got a fw restart while roaming from encrypted AP to non-encrypted one, we might end up with hitting a warning on the pending counter crypto_tx_tailroom_pending_dec having a non-zero value. The following comment taken from net/mac80211/key.c explains the rational for the delayed tailroom needed: /* * The reason for the delayed tailroom needed decrementing is to * make roaming faster: during roaming, all keys are first deleted * and then new keys are installed. The first new key causes the * crypto_tx_tailroom_needed_cnt to go from 0 to 1, which invokes * the cost of synchronize_net() (which can be slow). Avoid this * by deferring the crypto_tx_tailroom_needed_cnt decrementing on * key removal for a while, so if we roam the value is larger than * zero and no 0->1 transition happens. * * The cost is that if the AP switching was from an AP with keys * to one without, we still allocate tailroom while it would no * longer be needed. However, in the typical (fast) roaming case * within an ESS this usually won't happen. */ The next flow lead to the warning eventually reported as a bug: 1. Disconnect from encrypted AP 2. Set crypto_tx_tailroom_pending_dec = 1 for the key 3. Schedule work 4. Reconnect to non-encrypted AP 5. Add a new key, setting the tailroom counter = 1 6. Got FW restart while pending counter is set ---> hit the warning While on it, the ieee80211_reset_crypto_tx_tailroom() func was merged into its single caller ieee80211_reenable_keys (previously called ieee80211_enable_keys). Also, we reset the crypto_tx_tailroom_pending_dec and remove the counters warning as we just reset both. Signed-off-by: Lior Cohen Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/20190830112451.21655-7-luca@coelho.fi Signed-off-by: Johannes Berg

Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

2019-07-09T03:57:08+00:00

Pull crypto updates from Herbert Xu: "Here is the crypto update for 5.3: API: - Test shash interface directly in testmgr - cra_driver_name is now mandatory Algorithms: - Replace arc4 crypto_cipher with library helper - Implement 5 way interleave for ECB, CBC and CTR on arm64 - Add xxhash - Add continuous self-test on noise source to drbg - Update jitter RNG Drivers: - Add support for SHA204A random number generator - Add support for 7211 in iproc-rng200 - Fix fuzz test failures in inside-secure - Fix fuzz test failures in talitos - Fix fuzz test failures in qat" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits) crypto: stm32/hash - remove interruptible condition for dma crypto: stm32/hash - Fix hmac issue more than 256 bytes crypto: stm32/crc32 - rename driver file crypto: amcc - remove memset after dma_alloc_coherent crypto: ccp - Switch to SPDX license identifiers crypto: ccp - Validate the the error value used to index error messages crypto: doc - Fix formatting of new crypto engine content crypto: doc - Add parameter documentation crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR crypto: arm64/aes-ce - add 5 way interleave routines crypto: talitos - drop icv_ool crypto: talitos - fix hash on SEC1. crypto: talitos - move struct talitos_edesc into talitos.h lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE crypto/NX: Set receive window credits to max number of CRBs in RxFIFO crypto: asymmetric_keys - select CRYPTO_HASH where needed crypto: serpent - mark __serpent_setkey_sbox noinline crypto: testmgr - dynamically allocate crypto_shash crypto: testmgr - dynamically allocate testvec_config crypto: talitos - eliminate unneeded 'done' functions at build time ...

net/mac80211: move WEP handling to ARC4 library interface

2019-06-20T06:18:33+00:00

The WEP code in the mac80211 subsystem currently uses the crypto API to access the arc4 (RC4) cipher, which is overly complicated, and doesn't really have an upside in this particular case, since ciphers are always synchronous and therefore always implemented in software. Given that we have no accelerated software implementations either, it is much more straightforward to invoke a generic library interface directly. Signed-off-by: Ard Biesheuvel Signed-off-by: Herbert Xu

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

mac80211: IEEE 802.11 Extended Key ID support

2019-04-26T11:02:11+00:00

Add support for Extended Key ID as defined in IEEE 802.11-2016. - Implement the nl80211 API for Extended Key ID - Extend mac80211 API to allow drivers to support Extended Key ID - Enable Extended Key ID by default for drivers only supporting SW crypto (e.g. mac80211_hwsim) - Allow unicast Tx usage to be supressed (IEEE80211_KEY_FLAG_NO_AUTO_TX) - Select the decryption key based on the MPDU keyid - Enforce existing assumptions in the code that rekeys don't change the cipher Signed-off-by: Alexander Wetzel [remove module parameter] Signed-off-by: Johannes Berg

mac80211: aes-cmac: switch to shash CMAC driver

2017-02-08T08:19:33+00:00

Instead of open coding the CMAC algorithm in the mac80211 driver using byte wide xors and calls into the crypto layer for each block of data, instantiate a cmac(aes) synchronous hash and pass all the data into it directly. This does not only simplify the code, it also allows the use of more efficient and more secure implementations, especially on platforms where SIMD ciphers have a considerable setup cost. Signed-off-by: Ard Biesheuvel Signed-off-by: Johannes Berg

mac80211: move TKIP TX IVs to public part of key struct

2016-02-24T08:04:38+00:00

Some drivers/devices might want to set the IVs by themselves (and still let mac80211 generate MMIC). Specifically, this is needed when the device does offloading at certain times, and the driver has to make sure that the IVs of new tx frames (from the host) are synchronized with IVs that were potentially used during the offloading. Similarly to CCMP, move the TX IVs of TKIP keys to the public part of the key struct, and export a function to add the IV right into the crypto header. The public tx_pn field is defined as atomic64, so define TKIP_PN_TO_IV16/32 helper macros to convert it to iv16/32 when needed. Since the iv32 used for the p1k cache is taken directly from the frame, we can safely remove iv16/32 from being protected by tkip.txlock. Signed-off-by: Eliad Peller Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg

mac80211: remove key TX/RX counter

2015-07-17T13:38:01+00:00

This counter is inherently racy (since it can be incremented by RX as well as by concurrent TX) and only available in debugfs. Instead of fixing it to be per-CPU or similar, remove it for now. If needed it should be added without races and with proper nl80211, perhaps even addressing the threshold reporting TODO item that's been there since the code was originally added. Signed-off-by: Johannes Berg