kernel/linux.git/net/mac80211/agg-tx.c, branch linux-4.16.y

mac80211: use timeout from the AddBA response instead of the request

2018-06-20T19:01:38+00:00

[ Upstream commit 914eac248d876f9c00cd1792ffec3d182c863f13 ] 2016 spec, section 10.24.2 specifies that the block ack timeout in the ADD BA request is advisory. That means we should check the value in the response and act upon it (same as buffer size). Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Revert "mac80211: Add TXQ scheduling API"

2017-12-19T09:12:48+00:00

This reverts commit e937b8da5a591f141fe41aa48a2e898df9888c95. Turns out that a new driver (mt76) is coming in through Kalle's tree, and will conflict with this. It also has some conflicting requirements, so we'll revisit this later. Signed-off-by: Johannes Berg

mac80211: Add TXQ scheduling API

2017-12-11T11:37:51+00:00

This adds an API to mac80211 to handle scheduling of TXQs and changes the interface between driver and mac80211 for TXQ handling as follows: - The wake_tx_queue callback interface no longer includes the TXQ. Instead, the driver is expected to retrieve that from ieee80211_next_txq() - Two new mac80211 functions are added: ieee80211_next_txq() and ieee80211_schedule_txq(). The former returns the next TXQ that should be scheduled, and is how the driver gets a queue to pull packets from. The latter is called internally by mac80211 to start scheduling a queue, and the driver is supposed to call it to re-schedule the TXQ after it is finished pulling packets from it (unless the queue emptied). The ath9k and ath10k drivers are changed to use the new API. Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: Johannes Berg

mac80211: call synchronize_net once in the restart flow

2017-12-11T11:18:56+00:00

Currently the restart flow enables RX back, and then proceeds to tear down RX and TX aggregations. The TX aggregation tear down calls synchronize_net(), which waits for packet receiving to be done. This is done for every session, while RX processing is already active, and in some reproductions it takes up to 3 seconds. Add a call once in the restart_work, before we have traffic active again, and remove the subsequent calls when tearing down the aggregation. This requires to move down the code that turns off the reconfig flag in order to be able to test it in _ieee80211_stop_tx_ba_session(). Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg

mac80211: avoid looking up tid_tx/tid_rx from timers

2017-12-11T11:16:04+00:00

There's no need to re-lookup the data structures now that we actually get them immediately with from_timer(), just avoid that. The struct has to be valid anyway, otherwise the timer object itself would no longer be valid, and we can't have a different version of the struct since only a single session per TID is permitted. Signed-off-by: Johannes Berg

mac80211: properly free requested-but-not-started TX agg sessions

2017-11-20T16:01:31+00:00

When deleting a station or otherwise tearing down all aggregation sessions, make sure to delete requested but not yet started ones, to avoid the following scenario: * session is requested, added to tid_start_tx[] * ieee80211_ba_session_work() runs, gets past BLOCK_BA check * ieee80211_sta_tear_down_BA_sessions() runs, locks &sta->ampdu_mlme.mtx, e.g. while deleting the station - deleting all active sessions * ieee80211_ba_session_work() continues since tear down flushes it, and calls ieee80211_tx_ba_session_handle_start() for the new session, arms the timer for it * station deletion continues to __cleanup_single_sta() and frees the session struct, while the timer is armed Reported-by: Fengguang Wu Signed-off-by: Johannes Berg

mac80211: aggregation: Convert timers to use timer_setup()

2017-11-20T15:55:23+00:00

In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. This removes the tid mapping array and expands the tid structures to add a pointer back to the station, along with the tid index itself. Cc: Johannes Berg Cc: "David S. Miller" Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook [switch tid variables to u8, the valid range is 0-15 at most, initialize tid_tx->sta/tid properly] Signed-off-by: Johannes Berg

mac80211: agg-tx: call drv_wake_tx_queue in proper context

2017-09-05T14:25:07+00:00

Since drv_wake_tx_queue() is normally called in the TX path, which is already in an RCU critical section, we should call it the same way in the aggregation code path, so if the driver expects to be able to use RCU, it'll already be protected without having to enter a nested critical section. Additionally, disable soft-IRQs, since not doing so could cause issues in a driver that relies on them already being disabled like in the other path. Fixes: ba8c3d6f16a1 ("mac80211: add an intermediate software queue implementation") Signed-off-by: Johannes Berg

mac80211: shorten debug prints using ht_dbg() to avoid warning

2017-09-05T09:28:50+00:00

Invoking ht_dbg() with too long of a string will print a warning. Shorten the messages while retaining the printed patameters. Signed-off-by: Sharon Dvir Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg

networking: convert many more places to skb_put_zero()

2017-06-16T15:48:35+00:00

There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: Johannes Berg Signed-off-by: David S. Miller