kernel/linux.git/net/ipv6, branch v5.10.258

netfilter: ip6t_hbh: reject oversized option lists

2026-06-01T15:29:51+00:00

commit 4322dcde6b4173c2d8e8e6118ed290794263bcc8 upstream. struct ip6t_opts stores at most IP6T_OPTS_OPTSNR option descriptors, but hbh_mt6_check() does not reject larger optsnr values supplied from userspace. Validate optsnr in the rule setup path so only match data that fits the fixed-size opts array can be installed. This follows the existing xtables pattern of rejecting invalid user-provided counts in checkentry() and keeps the packet matching path unchanged. `struct ip6t_opts` has a fixed `opts[IP6T_OPTS_OPTSNR]` array, where `IP6T_OPTS_OPTSNR` is 16, then off-by-one array access is possible: [ 137.924693][ T8692] UBSAN: array-index-out-of-bounds in ../net/ipv6/netfilter/ip6t_hbh.c:110:29 [ 137.926167][ T8692] index 16 is out of range for type '__u16 [16]' Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Zhengchuan Liang Signed-off-by: Ren Wei Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman

ipv6: rename and move ip6_dst_lookup_tunnel()

2026-06-01T15:29:45+00:00

[ Upstream commit fc47e86dbfb75a864c0c9dd8e78affb6506296bb ] At the moment ip6_dst_lookup_tunnel() is used only by bareudp. Ideally, other UDP tunnel implementations should use it, but to do so the function needs to accept new parameters that are specific for UDP tunnels, such as the ports. Prepare for these changes by renaming the function to udp_tunnel6_dst_lookup() and move it to file net/ipv6/ip6_udp_tunnel.c. This is similar to what already done for IPv4 in commit bf3fcbf7e7a0 ("ipv4: rename and move ip_route_output_tunnel()"). Suggested-by: Guillaume Nault Signed-off-by: Beniamino Galvani Reviewed-by: David Ahern Signed-off-by: David S. Miller Stable-dep-of: aa6c6d9ee064 ("bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()") Signed-off-by: Sasha Levin

ipv6: fix possible UAF in icmpv6_rcv()

2026-06-01T15:29:39+00:00

[ Upstream commit f996edd7615e686ada141b7f3395025729ff8ccb ] Caching saddr and daddr before pskb_pull() is problematic since skb->head can change. Remove these temporary variables: - We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr when net_dbg_ratelimited() is called in the slow path. - Avoid potential future misuse after pskb_pull() call. Fixes: 4b3418fba0fe ("ipv6: icmp: include addresses in debug messages") Signed-off-by: Eric Dumazet Reviewed-by: Fernando Fernandez Mancera Reviewed-by: Joe Damato Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260416103505.2380753-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

ip6_gre: Use cached t->net in ip6erspan_changelink().

2026-06-01T15:29:24+00:00

commit 1d324c2f43f70c965f25c58cc3611c779adbe47e upstream. After commit 5e72ce3e3980 ("net: ipv6: Use link netns in newlink() of rtnl_link_ops"), ip6erspan_newlink() correctly resolves the per-netns ip6gre hash via link_net. ip6erspan_changelink() was not converted in that series and still uses dev_net(dev), which diverges from the device's creation netns after IFLA_NET_NS_FD migration. This re-inserts the tunnel into the wrong per-netns hash. The original netns keeps a stale entry. When that netns is later destroyed, ip6gre_exit_rtnl_net() walks the stale entry, producing a slab-use-after-free reported by KASAN, followed by a kernel BUG at net/core/dev.c (LIST_POISON1) in unregister_netdevice_many_notify(). Reachable from an unprivileged user namespace (unshare --user --map-root-user --net). ip6gre_changelink() earlier in the same file already uses the cached t->net; only ip6erspan_changelink() has the wrong shape. Fixes: 2d665034f239 ("net: ip6_gre: Fix ip6erspan hlen calculation") Cc: stable@vger.kernel.org # v5.15+ Signed-off-by: Maoyi Xie Reviewed-by: Eric Dumazet Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260430103318.3206018-1-maoyi.xie@ntu.edu.sg Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

ipv6: xfrm6: release dst on error in xfrm6_rcv_encap()

2026-06-01T15:29:23+00:00

commit bc0fcb9823cd0894934cf968b525c575833d7078 upstream. xfrm6_rcv_encap() performs an IPv6 route lookup when the skb does not already have a dst attached. ip6_route_input_lookup() returns a referenced dst entry even when the lookup resolves to an error route. If dst->error is set, xfrm6_rcv_encap() drops the skb without attaching the dst to the skb and without releasing the reference returned by the lookup. Repeated packets hitting this path therefore leak dst entries. Release the dst before jumping to the drop path. Fixes: 0146dca70b87 ("xfrm: add support for UDPv6 encapsulation of ESP") Cc: stable@kernel.org Reported-by: Yifan Wu Reported-by: Juefei Pu Co-developed-by: Yuan Tan Signed-off-by: Yuan Tan Suggested-by: Xin Liu Tested-by: Ruide Cao Signed-off-by: Yilin Zhu Signed-off-by: Ren Wei Reviewed-by: Simon Horman Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman

ipv6: rpl: reserve mac_len headroom when recompressed SRH grows

2026-06-01T15:29:21+00:00

commit 9e6bf146b55999a095bb14f73a843942456d1adc upstream. ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps the next segment into ipv6_hdr->daddr, recompresses, then pulls the old header and pushes the new one plus the IPv6 header back. The recompressed header can be larger than the received one when the swap reduces the common-prefix length the segments share with daddr (CmprI=0, CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes). pskb_expand_head() was gated on segments_left == 0, so on earlier segments the push consumed unchecked headroom. Once skb_push() leaves fewer than skb->mac_len bytes in front of data, skb_mac_header_rebuild()'s call to: skb_set_mac_header(skb, -skb->mac_len); will store (data - head) - mac_len into the u16 mac_header field, which wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB past skb->head. A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv. Fix this by expanding the head whenever the remaining room is less than the push size plus mac_len, and request that much extra so the rebuilt MAC header fits afterwards. Fixes: 8610c7c6e3bd ("net: ipv6: add support for rpl sr exthdr") Cc: stable Reported-by: Anthropic Signed-off-by: Greg Kroah-Hartman Link: https://patch.msgid.link/2026042133-gout-unvented-1bd9@gregkh Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

ipv6: add NULL checks for idev in SRv6 paths

2026-06-01T15:29:13+00:00

[ Upstream commit 06413793526251870e20402c39930804f14d59c0 ] __in6_dev_get() can return NULL when the device has no IPv6 configuration (e.g. MTU < IPV6_MIN_MTU or after NETDEV_UNREGISTER). Add NULL checks for idev returned by __in6_dev_get() in both seg6_hmac_validate_skb() and ipv6_srh_rcv() to prevent potential NULL pointer dereferences. Fixes: 1ababeba4a21 ("ipv6: implement dataplane support for rthdr type 4 (Segment Routing Header)") Fixes: bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support") Signed-off-by: Minhong He Reviewed-by: Andrea Mayer Link: https://patch.msgid.link/20260316073301.106643-1-heminhong@kylinos.cn Signed-off-by: Jakub Kicinski Signed-off-by: Li hongliang <1468888505@139.com> Signed-off-by: Sasha Levin

netfilter: ip6t_eui64: reject invalid MAC header for all packets

2026-06-01T15:29:09+00:00

[ Upstream commit fdce0b3590f724540795b874b4c8850c90e6b0a8 ] `eui64_mt6()` derives a modified EUI-64 from the Ethernet source address and compares it with the low 64 bits of the IPv6 source address. The existing guard only rejects an invalid MAC header when `par->fragoff != 0`. For packets with `par->fragoff == 0`, `eui64_mt6()` can still reach `eth_hdr(skb)` even when the MAC header is not valid. Fix this by removing the `par->fragoff != 0` condition so that packets with an invalid MAC header are rejected before accessing `eth_hdr(skb)`. Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") Reported-by: Yifan Wu Reported-by: Juefei Pu Co-developed-by: Yuan Tan Signed-off-by: Yuan Tan Suggested-by: Xin Liu Tested-by: Ren Wei Signed-off-by: Zhengchuan Liang Signed-off-by: Ren Wei Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin

xfrm: esp: avoid in-place decrypt on shared skb frags

2026-05-08T10:45:22+00:00

commit f4c50a4034e62ab75f1d5cdd191dd5f9c77fdff4 upstream. MSG_SPLICE_PAGES can attach pages from a pipe directly to an skb. TCP marks such skbs with SKBFL_SHARED_FRAG after skb_splice_from_iter(), so later paths that may modify packet data can first make a private copy. The IPv4/IPv6 datagram append paths did not set this flag when splicing pages into UDP skbs. That leaves an ESP-in-UDP packet made from shared pipe pages looking like an ordinary uncloned nonlinear skb. ESP input then takes the no-COW fast path for uncloned skbs without a frag_list and decrypts in place over data that is not owned privately by the skb. Mark IPv4/IPv6 datagram splice frags with SKBFL_SHARED_FRAG, matching TCP. Also make ESP input fall back to skb_cow_data() when the flag is present, so ESP does not decrypt externally backed frags in place. Private nonlinear skb frags still use the existing fast path. This intentionally does not change ESP output. In esp_output_head(), the path that appends the ESP trailer to existing skb tailroom without calling skb_cow_data() is not reachable for nonlinear skbs: skb_tailroom() returns zero when skb->data_len is nonzero, while ESP tailen is positive. Thus ESP output will either use the separate destination-frag path or fall back to skb_cow_data(). Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible") Fixes: 7da0dde68486 ("ip, udp: Support MSG_SPLICE_PAGES") Fixes: 6d8192bd69bb ("ip6, udp6: Support MSG_SPLICE_PAGES") Reported-by: Hyunwoo Kim Reported-by: Kuan-Ting Chen Tested-by: Hyunwoo Kim Cc: stable@vger.kernel.org Signed-off-by: Kuan-Ting Chen Signed-off-by: Steffen Klassert [bwh: Backported to 5.10: set the SKBTX_SHARED_FRAG flag in ip_append_page() instead of __ip{,6}_append_data()] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

seg6: separate dst_cache for input and output paths in seg6 lwtunnel

2026-04-18T08:31:16+00:00

[ Upstream commit c3812651b522fe8437ebb7063b75ddb95b571643 ] The seg6 lwtunnel uses a single dst_cache per encap route, shared between seg6_input_core() and seg6_output_core(). These two paths can perform the post-encap SID lookup in different routing contexts (e.g., ip rules matching on the ingress interface, or VRF table separation). Whichever path runs first populates the cache, and the other reuses it blindly, bypassing its own lookup. Fix this by splitting the cache into cache_input and cache_output, so each path maintains its own cached dst independently. Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Cc: stable@vger.kernel.org Signed-off-by: Andrea Mayer Reviewed-by: Nicolas Dichtel Reviewed-by: Justin Iurman Link: https://patch.msgid.link/20260404004405.4057-2-andrea.mayer@uniroma2.it Signed-off-by: Jakub Kicinski [ adapted cache field references ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman