kernel/linux.git/net/ipv6/udp_offload.c, branch v5.16

udp: properly complete L4 GRO over UDP tunnel packet

2021-03-31T00:06:49+00:00

After the previous patch, the stack can do L4 UDP aggregation on top of a UDP tunnel. In such scenario, udp{4,6}_gro_complete will be called twice. This function will enter its is_flist branch immediately, even though that is only correct on the second call, as GSO_FRAGLIST is only relevant for the inner packet. Instead, we need to try first UDP tunnel-based aggregation, if the GRO packet requires that. This patch changes udp{4,6}_gro_complete to skip the frag list processing when while encap_mark == 1, identifying processing of the outer tunnel header. Additionally, clears the field in udp_gro_complete() so that we can enter the frag list path on the next round, for the inner header. v1 -> v2: - hopefully clarified the commit message Reviewed-by: Willem de Bruijn Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller

udp: ipv4: manipulate network header of NATed UDP GRO fraglist

2021-02-02T04:02:16+00:00

UDP/IP header of UDP GROed frag_skbs are not updated even after NAT forwarding. Only the header of head_skb from ip_finish_output_gso -> skb_gso_segment is updated but following frag_skbs are not updated. A call path skb_mac_gso_segment -> inet_gso_segment -> udp4_ufo_fragment -> __udp_gso_segment -> __udp_gso_segment_list does not try to update UDP/IP header of the segment list but copy only the MAC header. Update port, addr and check of each skb of the segment list in __udp_gso_segment_list. It covers both SNAT and DNAT. Fixes: 9fd1ff5d2ac7 (udp: Support UDP fraglist GRO/GSO.) Signed-off-by: Dongseok Yi Acked-by: Steffen Klassert Link: https://lore.kernel.org/r/1611962007-80092-1-git-send-email-dseok.yi@samsung.com Signed-off-by: Jakub Kicinski

Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-11-13T00:54:48+00:00

Signed-off-by: Jakub Kicinski

net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO

2020-11-12T17:55:51+00:00

udp{4,6}_lib_lookup_skb() use ip{,v6}_hdr() to get IP header of the packet. While it's probably OK for non-frag0 paths, this helpers will also point to junk on Fast/frag0 GRO when all headers are located in frags. As a result, sk/skb lookup may fail or give wrong results. To support both GRO modes, skb_gro_network_header() might be used. To not modify original functions, add private versions of udp{4,6}_lib_lookup_skb() only to perform correct sk lookups on GRO. Present since the introduction of "application-level" UDP GRO in 4.7-rc1. Misc: replace totally unneeded ternaries with plain ifs. Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket") Suggested-by: Willem de Bruijn Cc: Eric Dumazet Signed-off-by: Alexander Lobakin Acked-by: Willem de Bruijn Signed-off-by: Jakub Kicinski

udp6: move the mss check after udp gso tunnel processing

2020-10-30T22:23:41+00:00

For some protocol's gso, like SCTP, it's using GSO_BY_FRAGS for gso_size. When using UDP to encapsulate its packet, it will return error in udp6_ufo_fragment() as skb->len < gso_size, and it will never go to the gso tunnel processing. So we should move this check after udp gso tunnel processing, the same as udp4_ufo_fragment() does. v1->v2: - no change. v2->v3: - not do any cleanup. Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: Jakub Kicinski

udp: Support UDP fraglist GRO/GSO.

2020-01-27T10:00:21+00:00

This patch extends UDP GRO to support fraglist GRO/GSO by using the previously introduced infrastructure. If the feature is enabled, all UDP packets are going to fraglist GRO (local input and forward). After validating the csum, we mark ip_summed as CHECKSUM_UNNECESSARY for fraglist GRO packets to make sure that the csum is not touched. Signed-off-by: Steffen Klassert Reviewed-by: Willem de Bruijn Signed-off-by: David S. Miller

net: remove the check argument from __skb_gro_checksum_convert

2020-01-03T20:24:34+00:00

The argument is always ignored, so remove it. Signed-off-by: Li RongQing Reviewed-by: Simon Horman Signed-off-by: David S. Miller

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

net: use indirect call wrappers at GRO transport layer

2018-12-15T21:23:02+00:00

This avoids an indirect call in the receive path for TCP and UDP packets. TCP takes precedence on UDP, so that we have a single additional conditional in the common case. When IPV6 is build as module, all gro symbols except UDPv6 are builtin, while the latter belong to the ipv6 module, so we need some special care. v1 -> v2: - adapted to INDIRECT_CALL_ changes v2 -> v3: - fix build issue with CONFIG_IPV6=m Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller

udp: implement GRO for plain UDP sockets.

2018-11-08T00:23:04+00:00

This is the RX counterpart of commit bec1f6f69736 ("udp: generate gso with UDP_SEGMENT"). When UDP_GRO is enabled, such socket is also eligible for GRO in the rx path: UDP segments directed to such socket are assembled into a larger GSO_UDP_L4 packet. The core UDP GRO support is enabled with setsockopt(UDP_GRO). Initial benchmark numbers: Before: udp rx: 1079 MB/s 769065 calls/s After: udp rx: 1466 MB/s 24877 calls/s This change introduces a side effect in respect to UDP tunnels: after a UDP tunnel creation, now the kernel performs a lookup per ingress UDP packet, while before such lookup happened only if the ingress packet carried a valid internal header csum. rfc v2 -> rfc v3: - fixed typos in macro name and comments - really enforce UDP_GRO_CNT_MAX, instead of UDP_GRO_CNT_MAX + 1 - acquire socket lock in UDP_GRO setsockopt rfc v1 -> rfc v2: - use a new option to enable UDP GRO - use static keys to protect the UDP GRO socket lookup Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller