kernel/linux.git/net/ipv6/ip6_vti.c, branch v5.16

ip6_vti: initialize __ip6_tnl_parm struct in vti6_siocdevprivate

2021-12-27T12:17:33+00:00

The "__ip6_tnl_parm" struct was left uninitialized causing an invalid load of random data when the "__ip6_tnl_parm" struct was used elsewhere. As an example, in the function "ip6_tnl_xmit_ctl()", it tries to access the "collect_md" member. With "__ip6_tnl_parm" being uninitialized and containing random data, the UBSAN detected that "collect_md" held a non-boolean value. The UBSAN issue is as follows: =============================================================== UBSAN: invalid-load in net/ipv6/ip6_tunnel.c:1025:14 load of value 30 is not a valid value for type '_Bool' CPU: 1 PID: 228 Comm: kworker/1:3 Not tainted 5.16.0-rc4+ #8 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work Call Trace: dump_stack_lvl+0x44/0x57 ubsan_epilogue+0x5/0x40 __ubsan_handle_load_invalid_value+0x66/0x70 ? __cpuhp_setup_state+0x1d3/0x210 ip6_tnl_xmit_ctl.cold.52+0x2c/0x6f [ip6_tunnel] vti6_tnl_xmit+0x79c/0x1e96 [ip6_vti] ? lock_is_held_type+0xd9/0x130 ? vti6_rcv+0x100/0x100 [ip6_vti] ? lock_is_held_type+0xd9/0x130 ? rcu_read_lock_bh_held+0xc0/0xc0 ? lock_acquired+0x262/0xb10 dev_hard_start_xmit+0x1e6/0x820 __dev_queue_xmit+0x2079/0x3340 ? mark_lock.part.52+0xf7/0x1050 ? netdev_core_pick_tx+0x290/0x290 ? kvm_clock_read+0x14/0x30 ? kvm_sched_clock_read+0x5/0x10 ? sched_clock_cpu+0x15/0x200 ? find_held_lock+0x3a/0x1c0 ? lock_release+0x42f/0xc90 ? lock_downgrade+0x6b0/0x6b0 ? mark_held_locks+0xb7/0x120 ? neigh_connected_output+0x31f/0x470 ? lockdep_hardirqs_on+0x79/0x100 ? neigh_connected_output+0x31f/0x470 ? ip6_finish_output2+0x9b0/0x1d90 ? rcu_read_lock_bh_held+0x62/0xc0 ? ip6_finish_output2+0x9b0/0x1d90 ip6_finish_output2+0x9b0/0x1d90 ? ip6_append_data+0x330/0x330 ? ip6_mtu+0x166/0x370 ? __ip6_finish_output+0x1ad/0xfb0 ? nf_hook_slow+0xa6/0x170 ip6_output+0x1fb/0x710 ? nf_hook.constprop.32+0x317/0x430 ? ip6_finish_output+0x180/0x180 ? __ip6_finish_output+0xfb0/0xfb0 ? lock_is_held_type+0xd9/0x130 ndisc_send_skb+0xb33/0x1590 ? __sk_mem_raise_allocated+0x11cf/0x1560 ? dst_output+0x4a0/0x4a0 ? ndisc_send_rs+0x432/0x610 addrconf_dad_completed+0x30c/0xbb0 ? addrconf_rs_timer+0x650/0x650 ? addrconf_dad_work+0x73c/0x10e0 addrconf_dad_work+0x73c/0x10e0 ? addrconf_dad_completed+0xbb0/0xbb0 ? rcu_read_lock_sched_held+0xaf/0xe0 ? rcu_read_lock_bh_held+0xc0/0xc0 process_one_work+0x97b/0x1740 ? pwq_dec_nr_in_flight+0x270/0x270 worker_thread+0x87/0xbf0 ? process_one_work+0x1740/0x1740 kthread+0x3ac/0x490 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x22/0x30 =============================================================== The solution is to initialize "__ip6_tnl_parm" struct to zeros in the "vti6_siocdevprivate()" function. Signed-off-by: William Zhao Signed-off-by: David S. Miller

ip: use dev_addr_set() in tunnels

2021-10-13T16:41:37+00:00

Use dev_addr_set() instead of writing to netdev->dev_addr directly in ip tunnels drivers. Signed-off-by: Jakub Kicinski

ip_tunnel: use ndo_siocdevprivate

2021-07-27T19:11:44+00:00

The various ipv4 and ipv6 tunnel drivers each implement a set of 12 SIOCDEVPRIVATE commands for managing tunnels. These all work correctly in compat mode. Move them over to the new .ndo_siocdevprivate operation. Cc: Hideaki YOSHIFUJI Cc: David Ahern Cc: Steffen Klassert Cc: Herbert Xu Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-04-10T03:48:35+00:00

Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski

ipv6: remove extra dev_hold() for fallback tunnels

2021-03-31T21:53:11+00:00

My previous commits added a dev_hold() in tunnels ndo_init(), but forgot to remove it from special functions setting up fallback tunnels. Fallback tunnels do call their respective ndo_init() This leads to various reports like : unregister_netdevice: waiting for ip6gre0 to become free. Usage count = 2 Fixes: 48bb5697269a ("ip6_tunnel: sit: proper dev_{hold|put} in ndo_[un]init methods") Fixes: 6289a98f0817 ("sit: proper dev_{hold|put} in ndo_[un]init methods") Fixes: 40cb881b5aaa ("ip6_vti: proper dev_{hold|put} in ndo_[un]init methods") Fixes: 7f700334be9a ("ip6_gre: proper dev_{hold|put} in ndo_[un]init methods") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec

2021-03-31T21:37:51+00:00

Steffen Klassert says: ==================== pull request (net): ipsec 2021-03-31 1) Fix ipv4 pmtu checks for xfrm anf vti interfaces. From Eyal Birger. 2) There are situations where the socket passed to xfrm_output_resume() is not the same as the one attached to the skb. Use the socket passed to xfrm_output_resume() to avoid lookup failures when xfrm is used with VRFs. From Evan Nimmo. 3) Make the xfrm_state_hash_generation sequence counter per network namespace because but its write serialization lock is also per network namespace. Write protection is insufficient otherwise. From Ahmed S. Darwish. 4) Fixup sctp featue flags when used with esp offload. From Xin Long. 5) xfrm BEET mode doesn't support fragments for inner packets. This is a limitation of the protocol, so no fix possible. Warn at least to notify the user about that situation. From Xin Long. 6) Fix NULL pointer dereference on policy lookup when namespaces are uses in combination with esp offload. 7) Fix incorrect transformation on esp offload when packets get segmented at layer 3. 8) Fix some user triggered usages of WARN_ONCE in the xfrm compat layer. From Dmitry Safonov. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller

ip6_vti: proper dev_{hold|put} in ndo_[un]init methods

2021-03-29T23:31:51+00:00

After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger a warning [1] Issue here is that: - all dev_put() should be paired with a corresponding prior dev_hold(). - A driver doing a dev_put() in its ndo_uninit() MUST also do a dev_hold() in its ndo_init(), only when ndo_init() is returning 0. Otherwise, register_netdevice() would call ndo_uninit() in its error path and release a refcount too soon. Therefore, we need to move dev_hold() call from vti6_tnl_create2() to vti6_dev_init_gen() [1] WARNING: CPU: 0 PID: 15951 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31 Modules linked in: CPU: 0 PID: 15951 Comm: syz-executor.3 Not tainted 5.12.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31 Code: 1d 6a 5a e8 09 31 ff 89 de e8 8d 1a ab fd 84 db 75 e0 e8 d4 13 ab fd 48 c7 c7 a0 e1 c1 89 c6 05 4a 5a e8 09 01 e8 2e 36 fb 04 <0f> 0b eb c4 e8 b8 13 ab fd 0f b6 1d 39 5a e8 09 31 ff 89 de e8 58 RSP: 0018:ffffc90001eaef28 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000040000 RSI: ffffffff815c51f5 RDI: fffff520003d5dd7 RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815bdf8e R11: 0000000000000000 R12: ffff88801bb1c568 R13: ffff88801f69e800 R14: 00000000ffffffff R15: ffff888050889d40 FS: 00007fc79314e700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1c1ff47108 CR3: 0000000020fd5000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __refcount_dec include/linux/refcount.h:344 [inline] refcount_dec include/linux/refcount.h:359 [inline] dev_put include/linux/netdevice.h:4135 [inline] vti6_dev_uninit+0x31a/0x360 net/ipv6/ip6_vti.c:297 register_netdevice+0xadf/0x1500 net/core/dev.c:10308 vti6_tnl_create2+0x1b5/0x400 net/ipv6/ip6_vti.c:190 vti6_newlink+0x9d/0xd0 net/ipv6/ip6_vti.c:1020 __rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3443 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3491 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x331/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmmsg+0x195/0x470 net/socket.c:2490 __do_sys_sendmmsg net/socket.c:2519 [inline] __se_sys_sendmmsg net/socket.c:2516 [inline] __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2516 Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller

vti6: fix ipv4 pmtu check to honor ip header df

2021-03-03T06:36:18+00:00

Frag needed should only be sent if the header enables DF. This fix allows IPv4 packets larger than MTU to pass the vti6 interface and be fragmented after encapsulation, aligning behavior with non-vti6 xfrm. Fixes: ccd740cbc6e0 ("vti6: Add pmtu handling to vti6_xmit.") Signed-off-by: Eyal Birger Reviewed-by: Sabrina Dubroca Signed-off-by: Steffen Klassert

net: always use icmp{,v6}_ndo_send from ndo_start_xmit

2021-03-01T21:11:35+00:00

There were a few remaining tunnel drivers that didn't receive the prior conversion to icmp{,v6}_ndo_send. Knowing now that this could lead to memory corrution (see ee576c47db60 ("net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending") for details), there's even more imperative to have these all converted. So this commit goes through the remaining cases that I could find and does a boring translation to the ndo variety. The Fixes: line below is the merge that originally added icmp{,v6}_ ndo_send and converted the first batch of icmp{,v6}_send users. The rationale then for the change applies equally to this patch. It's just that these drivers were left out of the initial conversion because these network devices are hiding in net/ rather than in drivers/net/. Cc: Florian Westphal Cc: Willem de Bruijn Cc: David S. Miller Cc: Hideaki YOSHIFUJI Cc: David Ahern Cc: Jakub Kicinski Cc: Steffen Klassert Fixes: 803381f9f117 ("Merge branch 'icmp-account-for-NAT-when-sending-icmps-from-ndo-layer'") Signed-off-by: Jason A. Donenfeld Acked-by: Willem de Bruijn Signed-off-by: David S. Miller

vti: switch to dev_get_tstats64

2020-11-10T01:50:28+00:00

Replace ip_tunnel_get_stats64() with the new identical core function dev_get_tstats64(). Signed-off-by: Heiner Kallweit Signed-off-by: Jakub Kicinski