kernel/linux.git/net/ipv6/ip6_output.c, branch v5.18

ipv6: fix panic when forwarding a pkt with no in6 dev

2022-04-11T11:28:43+00:00

kongweibin reported a kernel panic in ip6_forward() when input interface has no in6 dev associated. The following tc commands were used to reproduce this panic: tc qdisc del dev vxlan100 root tc qdisc add dev vxlan100 root netem corrupt 5% CC: stable@vger.kernel.org Fixes: ccd27f05ae7b ("ipv6: fix 'disable_policy' for fwd packets") Reported-by: kongweibin Signed-off-by: Nicolas Dichtel Reviewed-by: David Ahern Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-03-17T20:56:58+00:00

No conflicts. Signed-off-by: Jakub Kicinski

net: Add l3mdev index to flow struct and avoid oif reset for port devices

2022-03-16T03:20:02+00:00

The fundamental premise of VRF and l3mdev core code is binding a socket to a device (l3mdev or netdev with an L3 domain) to indicate L3 scope. Legacy code resets flowi_oif to the l3mdev losing any original port device binding. Ben (among others) has demonstrated use cases where the original port device binding is important and needs to be retained. This patch handles that by adding a new entry to the common flow struct that can indicate the l3mdev index for later rule and table matching avoiding the need to reset flowi_oif. In addition to allowing more use cases that require port device binds, this patch brings a few datapath simplications: 1. l3mdev_fib_rule_match is only called when walking fib rules and always after l3mdev_update_flow. That allows an optimization to bail early for non-VRF type uses cases when flowi_l3mdev is not set. Also, only that index needs to be checked for the FIB table id. 2. l3mdev_update_flow can be called with flowi_oif set to a l3mdev (e.g., VRF) device. By resetting flowi_oif only for this case the FLOWI_FLAG_SKIP_NH_OIF flag is not longer needed and can be removed, removing several checks in the datapath. The flowi_iif path can be simplified to only be called if the it is not loopback (loopback can not be assigned to an L3 domain) and the l3mdev index is not already set. 3. Avoid another device lookup in the output path when the fib lookup returns a reject failure. Note: 2 functional tests for local traffic with reject fib rules are updated to reflect the new direct failure at FIB lookup time for ping rather than the failure on packet path. The current code fails like this: HINT: Fails since address on vrf device is out of device scope COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1 ping: Warning: source address might be selected on device other than: eth1 PING 172.16.3.1 (172.16.3.1) from 172.16.3.1 eth1: 56(84) bytes of data. --- 172.16.3.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms where the test now directly fails: HINT: Fails since address on vrf device is out of device scope COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1 ping: connect: No route to host Signed-off-by: David Ahern Tested-by: Ben Greear Link: https://lore.kernel.org/r/20220314204551.16369-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski

net: ipv6: fix skb_over_panic in __ip6_append_data

2022-03-12T01:11:38+00:00

Syzbot found a kernel bug in the ipv6 stack: LINK: https://syzkaller.appspot.com/bug?id=205d6f11d72329ab8d62a610c44c5e7e25415580 The reproducer triggers it by sending a crafted message via sendmmsg() call, which triggers skb_over_panic, and crashes the kernel: skbuff: skb_over_panic: text:ffffffff84647fb4 len:65575 put:65575 head:ffff888109ff0000 data:ffff888109ff0088 tail:0x100af end:0xfec0 dev: Update the check that prevents an invalid packet with MTU equal to the fregment header size to eat up all the space for payload. The reproducer can be found here: LINK: https://syzkaller.appspot.com/text?tag=ReproC&x=1648c83fb00000 Reported-by: syzbot+e223cf47ec8ae183f2a0@syzkaller.appspotmail.com Signed-off-by: Tadeusz Struk Acked-by: Willem de Bruijn Link: https://lore.kernel.org/r/20220310232538.1044947-1-tadeusz.struk@linaro.org Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-03-03T19:55:12+00:00

net/batman-adv/hard-interface.c commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check") commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message") https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/ net/smc/af_smc.c commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails") commit 462791bbfa35 ("net/smc: add sysctl interface for SMC") https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/ Signed-off-by: Jakub Kicinski

net: Add skb_clear_tstamp() to keep the mono delivery_time

2022-03-03T14:38:48+00:00

Right now, skb->tstamp is reset to 0 whenever the skb is forwarded. If skb->tstamp has the mono delivery_time, clearing it can hurt the performance when it finally transmits out to fq@phy-dev. The earlier patch added a skb->mono_delivery_time bit to flag the skb->tstamp carrying the mono delivery_time. This patch adds skb_clear_tstamp() helper which keeps the mono delivery_time and clears everything else. The delivery_time clearing will be postponed until the stack knows the skb will be delivered locally. It will be done in a latter patch. Signed-off-by: Martin KaFai Lau Signed-off-by: David S. Miller

net: Add skb->mono_delivery_time to distinguish mono delivery_time from (rcv) timestamp

2022-03-03T14:38:48+00:00

skb->tstamp was first used as the (rcv) timestamp. The major usage is to report it to the user (e.g. SO_TIMESTAMP). Later, skb->tstamp is also set as the (future) delivery_time (e.g. EDT in TCP) during egress and used by the qdisc (e.g. sch_fq) to make decision on when the skb can be passed to the dev. Currently, there is no way to tell skb->tstamp having the (rcv) timestamp or the delivery_time, so it is always reset to 0 whenever forwarded between egress and ingress. While it makes sense to always clear the (rcv) timestamp in skb->tstamp to avoid confusing sch_fq that expects the delivery_time, it is a performance issue [0] to clear the delivery_time if the skb finally egress to a fq@phy-dev. For example, when forwarding from egress to ingress and then finally back to egress: tcp-sender => veth@netns => veth@hostns => fq@eth0@hostns ^ ^ reset rest This patch adds one bit skb->mono_delivery_time to flag the skb->tstamp is storing the mono delivery_time (EDT) instead of the (rcv) timestamp. The current use case is to keep the TCP mono delivery_time (EDT) and to be used with sch_fq. A latter patch will also allow tc-bpf@ingress to read and change the mono delivery_time. In the future, another bit (e.g. skb->user_delivery_time) can be added for the SCM_TXTIME where the clock base is tracked by sk->sk_clockid. [ This patch is a prep work. The following patches will get the other parts of the stack ready first. Then another patch after that will finally set the skb->mono_delivery_time. ] skb_set_delivery_time() function is added. It is used by the tcp_output.c and during ip[6] fragmentation to assign the delivery_time to the skb->tstamp and also set the skb->mono_delivery_time. A note on the change in ip_send_unicast_reply() in ip_output.c. It is only used by TCP to send reset/ack out of a ctl_sk. Like the new skb_set_delivery_time(), this patch sets the skb->mono_delivery_time to 0 for now as a place holder. It will be enabled in a latter patch. A similar case in tcp_ipv6 can be done with skb_set_delivery_time() in tcp_v6_send_response(). [0] (slide 22): https://linuxplumbersconf.org/event/11/contributions/953/attachments/867/1658/LPC_2021_BPF_Datapath_Extensions.pdf Signed-off-by: Martin KaFai Lau Signed-off-by: David S. Miller

net: ip: add skb drop reasons for ip egress path

2022-02-26T12:53:58+00:00

Replace kfree_skb() which is used in the packet egress path of IP layer with kfree_skb_reason(). Functions that are involved include: __ip_queue_xmit() ip_finish_output() ip_mc_finish_output() ip6_output() ip6_finish_output() ip6_finish_output2() Following new drop reasons are introduced: SKB_DROP_REASON_IP_OUTNOROUTES SKB_DROP_REASON_BPF_CGROUP_EGRESS SKB_DROP_REASON_IPV6DISABLED SKB_DROP_REASON_NEIGH_CREATEFAIL Reviewed-by: Mengen Sun Reviewed-by: Hao Peng Signed-off-by: Menglong Dong Reviewed-by: David Ahern Signed-off-by: David S. Miller

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec

2022-02-25T10:44:15+00:00

Steffen Klassert says: ==================== 1) Fix PMTU for IPv6 if the reported MTU minus the ESP overhead is smaller than 1280. From Jiri Bohac. 2) Fix xfrm interface ID and inter address family tunneling when migrating xfrm states. From Yan Yan. 3) Add missing xfrm intrerface ID initialization on xfrmi_changelink. From Antony Antony. 4) Enforce validity of xfrm offload input flags so that userspace can't send undefined flags to the offload driver. From Leon Romanovsky. ==================== Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-02-25T01:54:25+00:00

tools/testing/selftests/net/mptcp/mptcp_join.sh 34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers") 857898eb4b28 ("selftests: mptcp: add missing join check") 6ef84b1517e0 ("selftests: mptcp: more robust signal race test") https://lore.kernel.org/all/20220221131842.468893-1-broonie@kernel.org/ drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/ct.c fb7e76ea3f3b6 ("net/mlx5e: TC, Skip redundant ct clear actions") c63741b426e11 ("net/mlx5e: Fix MPLSoUDP encap to use MPLS action information") 09bf97923224f ("net/mlx5e: TC, Move pedit_headers_action to parse_attr") 84ba8062e383 ("net/mlx5e: Test CT and SAMPLE on flow attr") efe6f961cd2e ("net/mlx5e: CT, Don't set flow flag CT for ct clear flow") 3b49a7edec1d ("net/mlx5e: TC, Reject rules with multiple CT actions") Signed-off-by: Jakub Kicinski