kernel/linux.git/net/ipv6/icmp.c, branch v5.18

ipv6: do not use per netns icmp sockets

2022-01-25T11:25:21+00:00

Back in linux-2.6.25 (commit 98c6d1b261e7 "[NETNS]: Make icmpv6_sk per namespace.", we added private per-cpu/per-netns ipv6 icmp sockets. This adds memory and cpu costs, which do not seem needed. Now typical servers have 256 or more cores, this adds considerable tax to netns users. icmp sockets are used from BH context, are not receiving packets, and do not store any persistent state but the 'struct net' pointer. icmpv6_xmit_lock() already makes sure to lock the chosen per-cpu socket. This patch has a considerable impact on the number of netns that the worker thread in cleanup_net() can dismantle per second, because ip6mr_sk_done() is no longer called, meaning we no longer acquire the rtnl mutex, competing with other threads adding new netns. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller

icmp: ICMPV6: Examine invoking packet for Segment Route Headers.

2022-01-04T12:17:35+00:00

RFC8754 says: ICMP error packets generated within the SR domain are sent to source nodes within the SR domain. The invoking packet in the ICMP error message may contain an SRH. Since the destination address of a packet with an SRH changes as each segment is processed, it may not be the destination used by the socket or application that generated the invoking packet. For the source of an invoking packet to process the ICMP error message, the ultimate destination address of the IPv6 header may be required. The following logic is used to determine the destination address for use by protocol-error handlers. * Walk all extension headers of the invoking IPv6 packet to the routing extension header preceding the upper-layer header. - If routing header is type 4 Segment Routing Header (SRH) o The SID at Segment List[0] may be used as the destination address of the invoking packet. Mangle the skb so the network header points to the invoking packet inside the ICMP packet. The seg6 helpers can then be used on the skb to find any segment routing headers. If found, mark this fact in the IPv6 control block of the skb, and store the offset into the packet of the SRH. Then restore the skb back to its old state. Signed-off-by: Andrew Lunn Reviewed-by: David Ahern Reviewed-by: Willem de Bruijn Signed-off-by: David S. Miller

ipv6: ICMPV6: add response to ICMPV6 RFC 8335 PROBE messages

2021-06-28T21:29:45+00:00

This patch builds off of commit 2b246b2569cd2ac6ff700d0dce56b8bae29b1842 and adds functionality to respond to ICMPV6 PROBE requests. Add icmp_build_probe function to construct PROBE requests for both ICMPV4 and ICMPV6. Modify icmpv6_rcv to detect ICMPV6 PROBE messages and call the icmpv6_echo_reply handler. Modify icmpv6_echo_reply to build a PROBE response message based on the queried interface. This patch has been tested using a branch of the iputils git repo which can be found here: https://github.com/Juniper-Clinic-2020/iputils/tree/probe-request Signed-off-by: Andreas Roeseler Reviewed-by: Willem de Bruijn Signed-off-by: David S. Miller

icmp: ICMPV6: pass RFC 8335 reply messages to ping_rcv

2021-04-13T21:38:01+00:00

The current icmp_rcv function drops all unknown ICMP types, including ICMP_EXT_ECHOREPLY (type 43). In order to parse Extended Echo Reply messages, we have to pass these packets to the ping_rcv function, which does not do any other filtering and passes the packet to the designated socket. Pass incoming RFC 8335 ICMP Extended Echo Reply packets to the ping_rcv handler instead of discarding the packet. Signed-off-by: Andreas Roeseler Signed-off-by: David S. Miller

ipv6: convert elligible sysctls to u8

2021-03-31T21:48:20+00:00

Convert most sysctls that can fit in a byte. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller

mld: add new workqueues for process mld events

2021-03-26T22:14:56+00:00

When query/report packets are received, mld module processes them. But they are processed under BH context so it couldn't use sleepable functions. So, in order to switch context, the two workqueues are added which processes query and report event. In the struct inet6_dev, mc_{query | report}_queue are added so it is per-interface queue. And mc_{query | report}_work are workqueue structure. When the query or report event is received, skb is queued to proper queue and worker function is scheduled immediately. Workqueues and queues are protected by spinlock, which is mc_{query | report}_lock, and worker functions are protected by RTNL. Suggested-by: Cong Wang Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller

net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending

2021-02-23T19:29:52+00:00

The icmp{,v6}_send functions make all sorts of use of skb->cb, casting it with IPCB or IP6CB, assuming the skb to have come directly from the inet layer. But when the packet comes from the ndo layer, especially when forwarded, there's no telling what might be in skb->cb at that point. As a result, the icmp sending code risks reading bogus memory contents, which can result in nasty stack overflows such as this one reported by a user: panic+0x108/0x2ea __stack_chk_fail+0x14/0x20 __icmp_send+0x5bd/0x5c0 icmp_ndo_send+0x148/0x160 In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read from it. The optlen parameter there is of particular note, as it can induce writes beyond bounds. There are quite a few ways that can happen in __ip_options_echo. For example: // sptr/skb are attacker-controlled skb bytes sptr = skb_network_header(skb); // dptr/dopt points to stack memory allocated by __icmp_send dptr = dopt->__data; // sopt is the corrupt skb->cb in question if (sopt->rr) { optlen = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data // this now writes potentially attacker-controlled data, over // flowing the stack: memcpy(dptr, sptr+sopt->rr, optlen); } In the icmpv6_send case, the story is similar, but not as dire, as only IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is worse than the iif case, but it is passed to ipv6_find_tlv, which does a bit of bounds checking on the value. This is easy to simulate by doing a `memset(skb->cb, 0x41, sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by good fortune and the rarity of icmp sending from that context that we've avoided reports like this until now. For example, in KASAN: BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0 Write of size 38 at addr ffff888006f1f80e by task ping/89 CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5 Call Trace: dump_stack+0x9a/0xcc print_address_description.constprop.0+0x1a/0x160 __kasan_report.cold+0x20/0x38 kasan_report+0x32/0x40 check_memory_region+0x145/0x1a0 memcpy+0x39/0x60 __ip_options_echo+0xa0e/0x12b0 __icmp_send+0x744/0x1700 Actually, out of the 4 drivers that do this, only gtp zeroed the cb for the v4 case, while the rest did not. So this commit actually removes the gtp-specific zeroing, while putting the code where it belongs in the shared infrastructure of icmp{,v6}_ndo_send. This commit fixes the issue by passing an empty IPCB or IP6CB along to the functions that actually do the work. For the icmp_send, this was already trivial, thanks to __icmp_send providing the plumbing function. For icmpv6_send, this required a tiny bit of refactoring to make it behave like the v4 case, after which it was straight forward. Fixes: a2b78e9b2cac ("sunvnet: generate ICMP PTMUD messages for smaller port MTUs") Reported-by: SinYu Reviewed-by: Willem de Bruijn Link: https://lore.kernel.org/netdev/CAF=yD-LOF116aHub6RMe8vB8ZpnrrnoTdqhobEx+bvoA8AsP0w@mail.gmail.com/T/ Signed-off-by: Jason A. Donenfeld Link: https://lore.kernel.org/r/20210223131858.72082-1-Jason@zx2c4.com Signed-off-by: Jakub Kicinski

Merge tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux

2020-12-16T19:01:04+00:00

Pull selinux updates from Paul Moore: "While we have a small number of SELinux patches for v5.11, there are a few changes worth highlighting: - Change the LSM network hooks to pass flowi_common structs instead of the parent flowi struct as the LSMs do not currently need the full flowi struct and they do not have enough information to use it safely (missing information on the address family). This patch was discussed both with Herbert Xu (representing team netdev) and James Morris (representing team LSMs-other-than-SELinux). - Fix how we handle errors in inode_doinit_with_dentry() so that we attempt to properly label the inode on following lookups instead of continuing to treat it as unlabeled. - Tweak the kernel logic around allowx, auditallowx, and dontauditx SELinux policy statements such that the auditx/dontauditx are effective even without the allowx statement. Everything passes our test suite" * tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: lsm,selinux: pass flowi_common instead of flowi to the LSM hooks selinux: Fix fall-through warnings for Clang selinux: drop super_block backpointer from superblock_security_struct selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling selinux: allow dontauditx and auditallowx rules to take effect without allowx selinux: fix error initialization in inode_doinit_with_dentry()

lsm,selinux: pass flowi_common instead of flowi to the LSM hooks

2020-11-23T23:36:21+00:00

As pointed out by Herbert in a recent related patch, the LSM hooks do not have the necessary address family information to use the flowi struct safely. As none of the LSMs currently use any of the protocol specific flowi information, replace the flowi pointers with pointers to the address family independent flowi_common struct. Reported-by: Herbert Xu Acked-by: James Morris Signed-off-by: Paul Moore

IPv6: reply ICMP error if the first fragment don't include all headers

2020-10-31T20:16:02+00:00

Based on RFC 8200, Section 4.5 Fragment Header: - If the first fragment does not include all headers through an Upper-Layer header, then that fragment should be discarded and an ICMP Parameter Problem, Code 3, message should be sent to the source of the fragment, with the Pointer field set to zero. Checking each packet header in IPv6 fast path will have performance impact, so I put the checking in ipv6_frag_rcv(). As the packet may be any kind of L4 protocol, I only checked some common protocols' header length and handle others by (offset + 1) > skb->len. Also use !(frag_off & htons(IP6_OFFSET)) to catch atomic fragments (fragmented packet with only one fragment). When send ICMP error message, if the 1st truncated fragment is ICMP message, icmp6_send() will break as is_ineligible() return true. So I added a check in is_ineligible() to let fragment packet with nexthdr ICMP but no ICMP header return false. Signed-off-by: Hangbin Liu Signed-off-by: Jakub Kicinski