kernel/linux.git/net/ipv4/igmp.c, branch v6.6.148

ipv4: igmp: Fix potential UAF in igmp_gq_start_timer()

2026-07-24T14:03:28+00:00

[ Upstream commit 7b19c0f81ed1fdaec6bc522569be367199a9edf3 ] A race condition exists between device teardown (inetdev_destroy) and incoming IGMP query processing (igmp_rcv), leading to a Use-After-Free in the IGMP timer callback. During device destruction, inetdev_destroy() drops the primary reference to in_device, which can drop its refcount to 0. The actual freeing of in_device memory is deferred via RCU (using call_rcu()). Concurrently, igmp_rcv() runs under RCU read lock and obtains the in_device pointer. Because the memory is RCU-protected, CPU-0 can safely dereference in_device even if its refcount has hit 0. However, if CPU-0 calls igmp_gq_start_timer() and re-arms the timer, it attempts to acquire a reference using in_dev_hold(). This increments the refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning. Since the in_device memory is still scheduled to be freed after the RCU grace period (as the free callback does not check the refcount again), the device is freed while the timer is still armed. When the timer expires, it accesses the freed memory, causing a kernel panic. Fix this by using refcount_inc_not_zero() (via a new helper in_dev_hold_safe()) to prevent acquiring a reference if the device is already being destroyed. If the refcount is 0, we do not arm the timer. A similar issue in IPv6 MLD is fixed in a subsequent patch. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Zero Day Initiative Signed-off-by: Eric Dumazet Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260705181756.963063-2-edumazet@google.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

ipv4: igmp: remove multicast group from hash table on device destruction

2026-07-24T14:02:45+00:00

commit 7993211bde166471dffac074dc965489f86531f8 upstream. When a device is destroyed under RTNL, ip_mc_destroy_dev() iterates through the multicast list and calls ip_ma_put() on each membership, scheduling them for RCU reclamation. However, they are not unlinked from the device's multicast hash table (mc_hash). Since the device remains published in dev->ip_ptr until after ip_mc_destroy_dev() completes, concurrent RCU readers traversing mc_hash can still locate and access the multicast group after its refcount is decremented. If the RCU callback runs and frees the group while a reader is accessing it, a use-after-free occurs. Fix this by unlinking the multicast group from mc_hash using ip_mc_hash_remove() before scheduling it for reclamation. BUG: KASAN: slab-use-after-free in ip_check_mc_rcu+0x149/0x3f0 Read of size 4 at addr ffff888009bf1408 by task mausezahn/2276 Call Trace: dump_stack_lvl+0x67/0x90 print_report+0x175/0x7c0 kasan_report+0x147/0x180 ip_check_mc_rcu+0x149/0x3f0 udp_v4_early_demux+0x36d/0x12d0 ip_rcv_finish_core+0xb8b/0x1390 ip_rcv_finish+0x54/0x120 NF_HOOK+0x213/0x2b0 __netif_receive_skb+0x126/0x340 process_backlog+0x4f2/0xf00 __napi_poll+0x92/0x2c0 net_rx_action+0x583/0xc60 handle_softirqs+0x236/0x7f0 do_softirq+0x57/0x80 Allocated by task 2239: kasan_save_track+0x3e/0x80 __kasan_kmalloc+0x72/0x90 ____ip_mc_inc_group+0x31a/0xa40 __ip_mc_join_group+0x334/0x3f0 do_ip_setsockopt+0x16fa/0x2010 ip_setsockopt+0x3f/0x90 do_sock_setsockopt+0x1ad/0x300 Freed by task 0: kasan_save_track+0x3e/0x80 kasan_save_free_info+0x40/0x50 __kasan_slab_free+0x3a/0x60 __rcu_free_sheaf_prepare+0xd4/0x220 rcu_free_sheaf+0x36/0x190 rcu_core+0x8d9/0x12f0 handle_softirqs+0x236/0x7f0 Fixes: e9897071350b ("igmp: hash a hash table to speedup ip_check_mc_rcu()") Cc: stable@vger.kernel.org Signed-off-by: Yuyang Huang Reviewed-by: Kuniyuki Iwashima Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260701235014.73505-1-yuyanghuang@google.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

ipv4: igmp: annotate data-races around idev->mr_maxdelay

2026-03-04T12:20:47+00:00

[ Upstream commit e4faaf65a75f650ac4366ddff5dabb826029ca5a ] idev->mr_maxdelay is read and written locklessly, add READ_ONCE()/WRITE_ONCE() annotations. While we are at it, make this field an u32. Signed-off-by: Eric Dumazet Reviewed-by: David Ahern Link: https://patch.msgid.link/20260122172247.2429403-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

ipv4: igmp: fix refcnt uaf issue when receiving igmp query packet

2023-12-08T07:52:21+00:00

[ Upstream commit e2b706c691905fe78468c361aaabc719d0a496f1 ] When I perform the following test operations: 1.ip link add br0 type bridge 2.brctl addif br0 eth0 3.ip addr add 239.0.0.1/32 dev eth0 4.ip addr add 239.0.0.1/32 dev br0 5.ip addr add 224.0.0.1/32 dev br0 6.while ((1)) do ifconfig br0 up ifconfig br0 down done 7.send IGMPv2 query packets to port eth0 continuously. For example, ./mausezahn ethX -c 0 "01 00 5e 00 00 01 00 72 19 88 aa 02 08 00 45 00 00 1c 00 01 00 00 01 02 0e 7f c0 a8 0a b7 e0 00 00 01 11 64 ee 9b 00 00 00 00" The preceding tests may trigger the refcnt uaf issue of the mc list. The stack is as follows: refcount_t: addition on 0; use-after-free. WARNING: CPU: 21 PID: 144 at lib/refcount.c:25 refcount_warn_saturate (lib/refcount.c:25) CPU: 21 PID: 144 Comm: ksoftirqd/21 Kdump: loaded Not tainted 6.7.0-rc1-next-20231117-dirty #80 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:refcount_warn_saturate (lib/refcount.c:25) RSP: 0018:ffffb68f00657910 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8a00c3bf96c0 RCX: ffff8a07b6160908 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff8a07b6160900 RBP: ffff8a00cba36862 R08: 0000000000000000 R09: 00000000ffff7fff R10: ffffb68f006577c0 R11: ffffffffb0fdcdc8 R12: ffff8a00c3bf9680 R13: ffff8a00c3bf96f0 R14: 0000000000000000 R15: ffff8a00d8766e00 FS: 0000000000000000(0000) GS:ffff8a07b6140000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f10b520b28 CR3: 000000039741a000 CR4: 00000000000006f0 Call Trace: igmp_heard_query (net/ipv4/igmp.c:1068) igmp_rcv (net/ipv4/igmp.c:1132) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205) ip_local_deliver_finish (net/ipv4/ip_input.c:234) __netif_receive_skb_one_core (net/core/dev.c:5529) netif_receive_skb_internal (net/core/dev.c:5729) netif_receive_skb (net/core/dev.c:5788) br_handle_frame_finish (net/bridge/br_input.c:216) nf_hook_bridge_pre (net/bridge/br_input.c:294) __netif_receive_skb_core (net/core/dev.c:5423) __netif_receive_skb_list_core (net/core/dev.c:5606) __netif_receive_skb_list (net/core/dev.c:5674) netif_receive_skb_list_internal (net/core/dev.c:5764) napi_gro_receive (net/core/gro.c:609) e1000_clean_rx_irq (drivers/net/ethernet/intel/e1000/e1000_main.c:4467) e1000_clean (drivers/net/ethernet/intel/e1000/e1000_main.c:3805) __napi_poll (net/core/dev.c:6533) net_rx_action (net/core/dev.c:6735) __do_softirq (kernel/softirq.c:554) run_ksoftirqd (kernel/softirq.c:913) smpboot_thread_fn (kernel/smpboot.c:164) kthread (kernel/kthread.c:388) ret_from_fork (arch/x86/kernel/process.c:153) ret_from_fork_asm (arch/x86/entry/entry_64.S:250) The root causes are as follows: Thread A Thread B ... netif_receive_skb br_dev_stop ... br_multicast_leave_snoopers ... __ip_mc_dec_group ... __igmp_group_dropped igmp_rcv igmp_stop_timer igmp_heard_query //ref = 1 ip_ma_put igmp_mod_timer refcount_dec_and_test igmp_start_timer //ref = 0 ... refcount_inc //ref increases from 0 When the device receives an IGMPv2 Query message, it starts the timer immediately, regardless of whether the device is running. If the device is down and has left the multicast group, it will cause the mc list refcount uaf issue. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhengchao Shao Reviewed-by: Eric Dumazet Reviewed-by: Hangbin Liu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU

2023-09-05T16:49:40+00:00

This is a follow up of commit 915d975b2ffa ("net: deal with integer overflows in kmalloc_reserve()") based on David Laight feedback. Back in 2010, I failed to realize malicious users could set dev->mtu to arbitrary values. This mtu has been since limited to 0x7fffffff but regardless of how big dev->mtu is, it makes no sense for igmpv3_newpack() to allocate more than IP_MAX_MTU and risk various skb fields overflows. Fixes: 57e1ab6eaddc ("igmp: refine skb allocations") Link: https://lore.kernel.org/netdev/d273628df80f45428e739274ab9ecb72@AcuMS.aculab.com/ Signed-off-by: Eric Dumazet Reported-by: David Laight Cc: Kyle Zeng Reviewed-by: Simon Horman Signed-off-by: David S. Miller

inet: move inet->mc_all to inet->inet_frags

2023-08-16T10:09:17+00:00

IP_MULTICAST_ALL socket option can now be set/read without locking the socket. Signed-off-by: Eric Dumazet Acked-by: Soheil Hassas Yeganeh Reviewed-by: Simon Horman Signed-off-by: David S. Miller

ipv4: constify ip_mc_sf_allow() socket argument

2023-03-17T08:56:37+00:00

This clarifies ip_mc_sf_allow() intent. Signed-off-by: Eric Dumazet Reviewed-by: Simon Horman Signed-off-by: David S. Miller

treewide: use get_random_u32_below() instead of deprecated function

2022-11-18T01:15:15+00:00

This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook Reviewed-by: Greg Kroah-Hartman Acked-by: Darrick J. Wong # for xfs Reviewed-by: SeongJae Park # for damon Reviewed-by: Jason Gunthorpe # for infiniband Reviewed-by: Russell King (Oracle) # for arm Acked-by: Ulf Hansson # for mmc Signed-off-by: Jason A. Donenfeld

treewide: use prandom_u32_max() when possible, part 1

2022-10-11T23:42:55+00:00

Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman Reviewed-by: Kees Cook Reviewed-by: Yury Norov Reviewed-by: KP Singh Reviewed-by: Jan Kara # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder # for drbd Acked-by: Jakub Kicinski Acked-by: Heiko Carstens # for s390 Acked-by: Ulf Hansson # for mmc Acked-by: Darrick J. Wong # for xfs Signed-off-by: Jason A. Donenfeld

bpf: net: Change do_ip_getsockopt() to take the sockptr_t argument

2022-09-03T03:34:31+00:00

Similar to the earlier patch that changes sk_getsockopt() to take the sockptr_t argument. This patch also changes do_ip_getsockopt() to take the sockptr_t argument such that a latter patch can make bpf_getsockopt(SOL_IP) to reuse do_ip_getsockopt(). Note on the change in ip_mc_gsfget(). This function is to return an array of sockaddr_storage in optval. This function is shared between ip_get_mcast_msfilter() and compat_ip_get_mcast_msfilter(). However, the sockaddr_storage is stored at different offset of the optval because of the difference between group_filter and compat_group_filter. Thus, a new 'ss_offset' argument is added to ip_mc_gsfget(). Signed-off-by: Martin KaFai Lau Link: https://lore.kernel.org/r/20220902002828.2890585-1-kafai@fb.com Signed-off-by: Alexei Starovoitov