kernel/linux.git/net/ethtool/pse-pd.c, branch v6.12.93

ethtool: pse-pd: fix missing ethnl_ops_complete()

2026-06-09T10:25:42+00:00

[ Upstream commit ab5bf428fb6bd361163c7247b92750d1d24ca2ed ] pse_prepare_data() is missing ethnl_ops_complete() if ethnl_req_get_phydev() returned an error. Move getting phydev up so that we don't have to worry about this (similar order to linkstate_prepare_data()). Note that phydev may still be NULL (this is checked in pse_get_pse_attributes()), the goal isn't really to avoid the _begin() / _complete() calls, only to simplify the error handling. While at it propagate the original error. Why this code overrides the error with -ENODEV but !phydev generates -EOPNOTSUPP is unclear to me... Fixes: 31748765bed3 ("net: ethtool: pse-pd: Target the command to the requested PHY") Reviewed-by: Maxime Chevallier Link: https://patch.msgid.link/20260526153533.2779187-5-kuba@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device

2025-03-13T12:02:08+00:00

[ Upstream commit 637399bf7e77797811adf340090b561a8f9d1213 ] ethnl_req_get_phydev() is used to lookup a phy_device, in the case an ethtool netlink command targets a specific phydev within a netdev's topology. It takes as a parameter a const struct nlattr *header that's used for error handling : if (!phydev) { NL_SET_ERR_MSG_ATTR(extack, header, "no phy matching phyindex"); return ERR_PTR(-ENODEV); } In the notify path after a ->set operation however, there's no request attributes available. The typical callsite for the above function looks like: phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_XXX_HEADER], info->extack); So, when tb is NULL (such as in the ethnl notify path), we have a nice crash. It turns out that there's only the PLCA command that is in that case, as the other phydev-specific commands don't have a notification. This commit fixes the crash by passing the cmd index and the nlattr array separately, allowing NULL-checking it directly inside the helper. Fixes: c15e065b46dc ("net: ethtool: Allow passing a phy index for some commands") Signed-off-by: Maxime Chevallier Reviewed-by: Kory Maincent Reported-by: Parthiban Veerasooran Link: https://patch.msgid.link/20250301141114.97204-1-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

ethtool: pse-pd: move pse validation into set

2024-08-30T19:14:57+00:00

Move validation into set, removing .set_validate operation as its current implementation holds the rtnl lock for acquiring the PHY device, defeating the intended purpose of checking before grabbing the lock. Reported-by: syzbot+ec369e6d58e210135f71@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ec369e6d58e210135f71 Fixes: 31748765bed3 ("net: ethtool: pse-pd: Target the command to the requested PHY") Signed-off-by: Diogo Jahchan Koike Reviewed-by: Maxime Chevallier Link: https://patch.msgid.link/20240829184830.5861-1-djahchankoike@gmail.com Signed-off-by: Jakub Kicinski

net: ethtool: pse-pd: Target the command to the requested PHY

2024-08-23T12:04:34+00:00

PSE and PD configuration is a PHY-specific command. Instead of targeting the command towards dev->phydev, use the request to pick the targeted PHY device. As we don't get the PHY directly from the netdev's attached phydev, also adjust the error messages. Signed-off-by: Maxime Chevallier Reviewed-by: Christophe Leroy Tested-by: Christophe Leroy Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-07-15T20:19:17+00:00

Merge in late fixes to prepare for the 6.11 net-next PR. Conflicts: 93c3a96c301f ("net: pse-pd: Do not return EOPNOSUPP if config is null") 4cddb0f15ea9 ("net: ethtool: pse-pd: Fix possible null-deref") 30d7b6727724 ("net: ethtool: Add new power limit get and set features") https://lore.kernel.org/20240715123204.623520bb@canb.auug.org.au/ Signed-off-by: Jakub Kicinski

net: ethtool: pse-pd: Fix possible null-deref

2024-07-14T14:16:18+00:00

Fix a possible null dereference when a PSE supports both c33 and PoDL, but only one of the netlink attributes is specified. The c33 or PoDL PSE capabilities are already validated in the ethnl_set_pse_validate() call. Signed-off-by: Kory Maincent Reported-by: Jakub Kicinski Closes: https://lore.kernel.org/netdev/20240705184116.13d8235a@kernel.org/ Fixes: 4d18e3ddf427 ("net: ethtool: pse-pd: Expand pse commands with the PSE PoE interface") Link: https://patch.msgid.link/20240711-fix_pse_pd_deref-v3-2-edd78fc4fe42@bootlin.com Signed-off-by: Jakub Kicinski

net: pse-pd: Do not return EOPNOSUPP if config is null

2024-07-14T14:16:18+00:00

For a PSE supporting both c33 and PoDL, setting config for one type of PoE leaves the other type's config null. Currently, this case returns EOPNOTSUPP, which is incorrect. Instead, we should do nothing if the configuration is empty. Signed-off-by: Kory Maincent Fixes: d83e13761d5b ("net: pse-pd: Use regulator framework within PSE framework") Link: https://patch.msgid.link/20240711-fix_pse_pd_deref-v3-1-edd78fc4fe42@bootlin.com Signed-off-by: Jakub Kicinski

net: ethtool: Add new power limit get and set features

2024-07-06T01:30:00+00:00

This patch expands the status information provided by ethtool for PSE c33 with available power limit and available power limit ranges. It also adds a call to pse_ethtool_set_pw_limit() to configure the PSE control power limit. Reviewed-by: Oleksij Rempel Signed-off-by: Kory Maincent Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-5-320003204264@bootlin.com Signed-off-by: Jakub Kicinski

net: ethtool: pse-pd: Expand C33 PSE status with class, power and extended state

2024-07-06T01:30:00+00:00

This update expands the status information provided by ethtool for PSE c33. It includes details such as the detected class, current power delivered, and extended state information. Reviewed-by: Oleksij Rempel Signed-off-by: Kory Maincent Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-1-320003204264@bootlin.com Signed-off-by: Jakub Kicinski

net: ethtool: pse-pd: Expand pse commands with the PSE PoE interface

2024-04-19T01:27:02+00:00

Add PSE PoE interface support in the ethtool pse command. Reviewed-by: Andrew Lunn Signed-off-by: Kory Maincent Link: https://lore.kernel.org/r/20240417-feature_poe-v9-3-242293fd1900@bootlin.com Signed-off-by: Jakub Kicinski