kernel/linux.git/net/ethtool/linkmodes.c, branch v5.10.257

ethtool: link up ethnl_header_policy as a nested policy

2020-10-06T13:25:55+00:00

To get the most out of parsing by the core, and to allow dumping full policies we need to specify which policy applies to nested attrs. For headers it's ethnl_header_policy. $ sed -i 's@$ETHTOOL_A_.*HEADER\].*=$ { .type = NLA_NESTED },@\1\n\t\tNLA_POLICY_NESTED(ethnl_header_policy),@' net/ethtool/* Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

ethtool: trim policy tables

2020-10-06T13:25:55+00:00

Since ethtool uses strict attribute validation there's no need to initialize all attributes in policy tables. 0 is NLA_UNSPEC which is going to be rejected. Remove the NLA_REJECTs. Similarly attributes above maxattrs are rejected, so there's no need to always size the policy tables to ETHTOOL_A_..._MAX. v2: - new patch Suggested-by: Johannes Berg Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

ethtool: wire up set policies to ops

2020-10-06T13:25:55+00:00

Similarly to get commands wire up the policies of set commands to get parsing by the core and policy dumps. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

ethtool: wire up get policies to ops

2020-10-06T13:25:55+00:00

Wire up policies for get commands in struct nla_policy of the ethtool family. Make use of genetlink code attr validation and parsing, as well as allow dumping policies to user space. For every ETHTOOL_MSG_*_GET: - add 'ethnl_' prefix to policy name - add extern declaration in net/ethtool/netlink.h - wire up the policy & attr in ethtool_genl_ops[]. - remove .request_policy and .max_attr from ethnl_request_ops. Obviously core only records the first "layer" of parsed attrs so we still need to parse the sub-attrs of the nested header attribute. v2: - merge of patches 1 and 2 from v1 - remove stray empty lines in ops - also remove .max_attr Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

ethtool: Add 100base-FX link mode entries

2020-09-19T23:54:35+00:00

Add entries for the 100base-FX full and half duplex supported modes. $ ethtool eth0 Supported ports: [ FIBRE ] Supported link modes: 100baseFX/Half 100baseFX/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 100baseFX/Half 100baseFX/Full Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 100Mb/s Duplex: Full Auto-negotiation: off Port: MII PHYAD: 1 Transceiver: external Supports Wake-on: gs Wake-on: d SecureOn password: 00:00:00:00:00:00 Current message level: 0x00000000 (0) Link detected: yes Signed-off-by: Dan Murphy Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

ethtool: ethnl_set_linkmodes: remove redundant null check

2020-08-03T22:11:49+00:00

info cannot be NULL here since its being accessed earlier in the function: nlmsg_parse(info->nlhdr...). Remove this redundant NULL check. Signed-off-by: Gaurav Singh Reviewed-by: Michal Kubecek Signed-off-by: David S. Miller

ethtool: Add support for 100Gbps per lane link modes

2020-07-08T22:30:42+00:00

Define 100G, 200G and 400G link modes using 100Gbps per lane LR, ER and FR are defined as a single link mode because they are using same technology and by design are fully interoperable. EEPROM content indicates if the module is LR, ER, or FR, and the user space ethtool decoder is planned to support decoding these modes in the EEPROM. Signed-off-by: Meir Lichtinger CC: Andrew Lunn Reviewed-by: Aya Levin Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller

ethtool: provide UAPI for PHY master/slave configuration.

2020-05-07T00:45:45+00:00

This UAPI is needed for BroadR-Reach 100BASE-T1 devices. Due to lack of auto-negotiation support, we needed to be able to configure the MASTER-SLAVE role of the port manually or from an application in user space. The same UAPI can be used for 1000BASE-T or MultiGBASE-T devices to force MASTER or SLAVE role. See IEEE 802.3-2018: 22.2.4.3.7 MASTER-SLAVE control register (Register 9) 22.2.4.3.8 MASTER-SLAVE status register (Register 10) 40.5.2 MASTER-SLAVE configuration resolution 45.2.1.185.1 MASTER-SLAVE config value (1.2100.14) 45.2.7.10 MultiGBASE-T AN control 1 register (Register 7.32) The MASTER-SLAVE role affects the clock configuration: ------------------------------------------------------------------------------- When the PHY is configured as MASTER, the PMA Transmit function shall source TX_TCLK from a local clock source. When configured as SLAVE, the PMA Transmit function shall source TX_TCLK from the clock recovered from data stream provided by MASTER. iMX6Q KSZ9031 XXX ------\ /-----------\ /------------\ | | | | | MAC |<----RGMII----->| PHY Slave |<------>| PHY Master | |<--- 125 MHz ---+-<------/ | | \ | ------/ \-----------/ \------------/ ^ \-TX_TCLK ------------------------------------------------------------------------------- Since some clock or link related issues are only reproducible in a specific MASTER-SLAVE-role, MAC and PHY configuration, it is beneficial to provide generic (not 100BASE-T1 specific) interface to the user space for configuration flexibility and trouble shooting. Signed-off-by: Oleksij Rempel Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-03-26T01:58:11+00:00

Overlapping header include additions in macsec.c A bug fix in 'net' overlapping with the removal of 'version' string in ena_netdev.c Overlapping test additions in selftests Makefile Overlapping PCI ID table adjustments in iwlwifi driver. Signed-off-by: David S. Miller

ethtool: fix reference leak in some *_SET handlers

2020-03-24T04:50:14+00:00

Andrew noticed that some handlers for *_SET commands leak a netdev reference if required ethtool_ops callbacks do not exist. A simple reproducer would be e.g. ip link add veth1 type veth peer name veth2 ethtool -s veth1 wol g ip link del veth1 Make sure dev_put() is called when ethtool_ops check fails. v2: add Fixes tags Fixes: a53f3d41e4d3 ("ethtool: set link settings with LINKINFO_SET request") Fixes: bfbcfe2032e7 ("ethtool: set link modes related data with LINKMODES_SET request") Fixes: e54d04e3afea ("ethtool: set message mask with DEBUG_SET request") Fixes: 8d425b19b305 ("ethtool: set wake-on-lan settings with WOL_SET request") Reported-by: Andrew Lunn Signed-off-by: Michal Kubecek Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Reviewed-by: Jakub Kicinski Signed-off-by: David S. Miller