kernel/linux.git/net/ethtool/common.h, branch v6.12.80

ethtool: refactor checking max channels

2024-08-10T04:52:13+00:00

Currently ethtool_set_channel calls separate functions to check whether the new channel number violates rss configuration or flow steering configuration. Very soon we need to check whether the new channel number violates memory provider configuration as well. To do all 3 checks cleanly, add a wrapper around ethtool_get_max_rxnfc_channel() and ethtool_get_max_rxfh_channel(), which does both checks. We can later extend this wrapper to add the memory provider check in one place. Note that in the current code, we put a descriptive genl error message when we run into issues. To preserve the error message, we pass the genl_info* to the common helper. The ioctl calls can pass NULL instead. Suggested-by: Jakub Kicinski Signed-off-by: Mina Almasry Link: https://patch.msgid.link/20240808205345.2141858-1-almasrymina@google.com Signed-off-by: Jakub Kicinski

Merge branch 'net-make-timestamping-selectable'

2024-07-15T15:02:30+00:00

First part of "net: Make timestamping selectable" from Kory Maincent. Change the driver-facing type already to lower rebasing pain. Link: https://lore.kernel.org/20240709-feature_ptp_netnext-v17-0-b5317f50df2a@bootlin.com/ Signed-off-by: Jakub Kicinski

net: Add struct kernel_ethtool_ts_info

2024-07-15T15:02:26+00:00

In prevision to add new UAPI for hwtstamp we will be limited to the struct ethtool_ts_info that is currently passed in fixed binary format through the ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code already started operating on an extensible kernel variant of that structure, similar in concept to struct kernel_hwtstamp_config vs struct hwtstamp_config. Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here we introduce the kernel-only structure in include/linux/ethtool.h. The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO. Acked-by: Shannon Nelson Acked-by: Alexandra Winter Signed-off-by: Kory Maincent Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com Signed-off-by: Jakub Kicinski

ethtool: fail closed if we can't get max channel used in indirection tables

2024-07-11T21:41:41+00:00

Commit 0d1b7d6c9274 ("bnxt: fix crashes when reducing ring count with active RSS contexts") proves that allowing indirection table to contain channels with out of bounds IDs may lead to crashes. Currently the max channel check in the core gets skipped if driver can't fetch the indirection table or when we can't allocate memory. Both of those conditions should be extremely rare but if they do happen we should try to be safe and fail the channel change. Reviewed-by: Jacob Keller Link: https://patch.msgid.link/20240710174043.754664-2-kuba@kernel.org Signed-off-by: Jakub Kicinski

net: ethtool: netlink: retrieve stats from multiple sources (eMAC, pMAC)

2023-01-23T12:44:18+00:00

IEEE 802.3-2018 clause 99 defines a MAC Merge sublayer which contains an Express MAC and a Preemptible MAC. Both MACs are hidden to higher and lower layers and visible as a single MAC (packet classification to eMAC or pMAC on TX is done based on priority; classification on RX is done based on SFD). For devices which support a MAC Merge sublayer, it is desirable to retrieve individual packet counters from the eMAC and the pMAC, as well as aggregate statistics (their sum). Introduce a new ETHTOOL_A_STATS_SRC attribute which is part of the policy of ETHTOOL_MSG_STATS_GET and, and an ETHTOOL_A_PAUSE_STATS_SRC which is part of the policy of ETHTOOL_MSG_PAUSE_GET (accepted when ETHTOOL_FLAG_STATS is set in the common ethtool header). Both of these take values from enum ethtool_mac_stats_src, defaulting to "aggregate" in the absence of the attribute. Existing drivers do not need to pay attention to this enum which was added to all driver-facing structures, just the ones which report the MAC merge layer as supported. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

ethtool: Fail number of channels change when it conflicts with rxnfc

2022-11-08T11:08:44+00:00

Similar to what we do with the hash indirection table [1], when network flow classification rules are forwarding traffic to channels greater than the requested number of channels, fail the operation. Without this, traffic could be directed to channels which no longer exist (dropped) after changing number of channels. [1] commit d4ab4286276f ("ethtool: correctly ensure {GS}CHANNELS doesn't conflict with GS{RXFH}") Reviewed-by: Tariq Toukan Signed-off-by: Gal Pressman Link: https://lore.kernel.org/r/20221106123127.522985-1-gal@nvidia.com Signed-off-by: Paolo Abeni

ethtool: add interface to interact with Ethernet Power Equipment

2022-10-04T00:33:57+00:00

Add interface to support Power Sourcing Equipment. At current step it provides generic way to address all variants of PSE devices as defined in IEEE 802.3-2018 but support only objects specified for IEEE 802.3-2018 104.4 PoDL Power Sourcing Equipment (PSE). Currently supported and mandatory objects are: IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState IEEE 802.3-2018 30.15.1.2.1 acPoDLPSEAdminControl This is minimal interface needed to control PSE on each separate ethernet port but it provides not all mandatory objects specified in IEEE 802.3-2018. Since "PoDL PSE" and "PSE" have similar names, but some different values I decide to not merge them and keep separate naming schema. This should allow as to be as close to IEEE 802.3 spec as possible and avoid name conflicts in the future. This implementation is connected to PHYs instead of MACs because PSE auto classification can potentially interfere with PHY auto negotiation. So, may be some extra PHY related initialization will be needed. With WIP version of ethtools interaction with PSE capable link looks as following: $ ip l ... 5: t1l1@eth0: .. ... $ ethtool --show-pse t1l1 PSE attributs for t1l1: PoDL PSE Admin State: disabled PoDL PSE Power Detection Status: disabled $ ethtool --set-pse t1l1 podl-pse-admin-control enable $ ethtool --show-pse t1l1 PSE attributs for t1l1: PoDL PSE Admin State: enabled PoDL PSE Power Detection Status: delivering power Signed-off-by: kernel test robot Signed-off-by: Oleksij Rempel Reviewed-by: Bagas Sanjaya Reviewed-by: Andrew Lunn Signed-off-by: Jakub Kicinski

net: ethtool: Export helpers for getting EEPROM info

2021-04-11T23:34:56+00:00

There are two ways to retrieve information from SFP EEPROMs. Many devices make use of the common code, and assign the sfp_bus pointer in the netdev to point to the bus holding the SFP device. Some MAC drivers directly implement ops in there ethool structure. Export within net/ethtool the two helpers used to call these methods, so that they can also be used in the new netlink code. Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

ethtool: Get link mode in use instead of speed and duplex parameters

2021-02-04T02:37:29+00:00

Currently, when user space queries the link's parameters, as speed and duplex, each parameter is passed from the driver to ethtool. Instead, get the link mode bit in use, and derive each of the parameters from it in ethtool. Signed-off-by: Danielle Ratson Signed-off-by: Jakub Kicinski

ethtool: add tunnel info interface

2020-07-10T20:54:00+00:00

Add an interface to report offloaded UDP ports via ethtool netlink. Now that core takes care of tracking which UDP tunnel ports the NICs are aware of we can quite easily export this information out to user space. The responsibility of writing the netlink dumps is split between ethtool code and udp_tunnel_nic.c - since udp_tunnel module may not always be loaded, yet we should always report the capabilities of the NIC. $ ethtool --show-tunnels eth0 Tunnel information for eth0: UDP port table 0: Size: 4 Types: vxlan No entries UDP port table 1: Size: 4 Types: geneve, vxlan-gpe Entries (1): port 1230, vxlan-gpe v4: - back to v2, build fix is now directly in udp_tunnel.h v3: - don't compile ETHTOOL_MSG_TUNNEL_INFO_GET in if CONFIG_INET not set. v2: - fix string set count, - reorder enums in the uAPI, - fix type of ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES to bitset in docs and comments. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller