kernel/linux.git/net/ethtool/common.c, branch v7.0-rc7

Convert 'alloc_flex' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51+00:00

This is the exact same thing as the 'alloc_obj()' version, only much smaller because there are a lot fewer users of the *alloc_flex() interface. As with alloc_obj() version, this was done entirely with mindless brute force, using the same script, except using 'flex' in the pattern rather than 'objs*'. Signed-off-by: Linus Torvalds

treewide: Replace kmalloc with kmalloc_obj for non-scalar types

2026-02-21T09:02:28+00:00

This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2026-02-05T17:54:08+00:00

Cross-merge networking fixes after downstream PR (net-6.19-rc9). No adjacent changes, conflicts: drivers/net/ethernet/spacemit/k1_emac.c 3125fc1701694 ("net: spacemit: k1-emac: fix jumbo frame support") f66086798f91f ("net: spacemit: Remove broken flow control support") https://lore.kernel.org/aYIysFIE9ooavWia@sirena.org.uk Signed-off-by: Jakub Kicinski

net: rss: fix reporting RXH_XFRM_NO_CHANGE as input_xfrm for contexts

2026-02-03T01:09:48+00:00

Initializing input_xfrm to RXH_XFRM_NO_CHANGE in RSS contexts is problematic. I think I did this to make it clear that the context does not have its own settings applied. But unlike ETH_RSS_HASH_NO_CHANGE which is zero, RXH_XFRM_NO_CHANGE is 0xff. We need to be careful when reading the value back, and remember to treat 0xff as 0. Remove the initialization and switch to storing 0. This lets us also remove the workaround in ethnl_rss_set(). Get side does not need any adjustments and context get no longer reports: RSS input transformation: symmetric-xor: on symmetric-or-xor: on Unknown bits in RSS input transformation: 0xfc for NICs which don't support input_xfrm. Remove the init of hfunc to ETH_RSS_HASH_NO_CHANGE while at it. As already mentioned this is a noop since ETH_RSS_HASH_NO_CHANGE is 0 and struct is zalloc'd. But as this fix exemplifies storing NO_CHANGE as state is fragile. This issue is implicitly caught by running our selftests because YNL in selftests errors out on unknown bits. Fixes: d3e2c7bab124 ("ethtool: rss: support setting input-xfrm via Netlink") Link: https://patch.msgid.link/20260130190311.811129-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

ethtool: remove ETHTOOL_GRXRINGS fallback through get_rxnfc

2026-01-28T01:32:56+00:00

All drivers that need to report the RX ring count now implement the get_rx_ring_count callback directly. Remove the legacy fallback path that obtained this information by calling get_rxnfc with ETHTOOL_GRXRINGS. This simplifies the code and makes get_rx_ring_count the only way to retrieve the RX ring count. Note: ethtool_get_rx_ring_count() returns int to allow returning -EOPNOTSUPP, while the callback returns u32. The implicit conversion is safe since RX ring counts will not exceed INT_MAX while we are still alive. Signed-off-by: Breno Leitao Link: https://patch.msgid.link/20260126-grxring_final-v1-1-0981cb24512e@debian.org Signed-off-by: Jakub Kicinski

net: phy: Introduce PHY ports representation

2026-01-14T02:52:34+00:00

Ethernet provides a wide variety of layer 1 protocols and standards for data transmission. The front-facing ports of an interface have their own complexity and configurability. Introduce a representation of these front-facing ports. The current code is minimalistic and only support ports controlled by PHY devices, but the plan is to extend that to SFP as well as raw Ethernet MACs that don't use PHY devices. This minimal port representation allows describing the media and number of pairs of a BaseT port. From that information, we can derive the linkmodes usable on the port, which can be used to limit the capabilities of an interface. For now, the port pairs and medium is derived from devicetree, defined by the PHY driver, or populated with default values (as we assume that all PHYs expose at least one port). The typical example is 100M ethernet. 100BaseTX works using only 2 pairs on a Cat 5 cables. However, in the situation where a 10/100/1000 capable PHY is wired to its RJ45 port through 2 pairs only, we have no way of detecting that. The "max-speed" DT property can be used, but a more accurate representation can be used : mdi { connector-0 { media = "BaseT"; pairs = <2>; }; }; From that information, we can derive the max speed reachable on the port. Another benefit of having that is to avoid vendor-specific DT properties (micrel,fiber-mode or ti,fiber-mode). This basic representation is meant to be expanded, by the introduction of port ops, userspace listing of ports, and support for multi-port devices. Reviewed-by: Christophe Leroy Signed-off-by: Maxime Chevallier Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20260108080041.553250-4-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski

net: ethtool: Introduce ETHTOOL_LINK_MEDIUM_* values

2026-01-14T02:52:34+00:00

In an effort to have a better representation of Ethernet ports, introduce enumeration values representing the various ethernet Mediums. This is part of the 802.3 naming convention, for example : 1000 Base T 4 | | | | | | | \_ pairs (4) | | \___ Medium (T == Twisted Copper Pairs) | \_______ Baseband transmission \____________ Speed Other example : 10000 Base K X 4 | | \_ lanes (4) | \___ encoding (BaseX is 8b/10b while BaseR is 66b/64b) \_____ Medium (K is backplane ethernet) In the case of representing a physical port, only the medium and number of pairs should be relevant. One exception would be 1000BaseX, which is currently also used as a medium in what appears to be any of 1000BaseSX, 1000BaseCX, 1000BaseLX, 1000BaseEX, 1000BaseBX10 and some other. This was reflected in the mediums associated with the 1000BaseX linkmode. These mediums are set in the net/ethtool/common.c lookup table that maintains a list of all linkmodes with their number of pairs, medium, encoding, speed and duplex. One notable exception to this is 100BaseT Ethernet. It emcompasses 100BaseTX, which is a 2-pairs protocol but also 100BaseT4, that will also work on 4-pairs cables. As we don't make a disctinction between these, the lookup table contains 2 sets of pair numbers, indicating the min number of pairs for a protocol to work and the "nominal" number of pairs as well. Another set of exceptions are linkmodes such 100000baseLR4_ER4, where the same link mode seems to represent 100GBaseLR4 and 100GBaseER4. The macro __DEFINE_LINK_MODE_PARAMS_MEDIUMS is here used to populate the .mediums bitfield with all appropriate mediums. Reviewed-by: Christophe Leroy Signed-off-by: Maxime Chevallier Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20260108080041.553250-3-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski

net: ethtool: Add support for 1600Gbps speed

2025-11-21T02:21:29+00:00

Add support for 1600Gbps link modes based on 200Gbps per lane [1]. This includes the adopted IEEE 802.3dj copper and optical PMDs that use 200G/lane signaling [2]. Add the following PMD types: - KR8 (backplane) - CR8 (copper cable) - DR8 (SMF 500m) - DR8-2 (SMF 2km) These modes are defined in the 802.3dj specifications. References: [1] https://www.ieee802.org/3/dj/public/23_03/opsasnick_3dj_01a_2303.pdf [2] https://www.ieee802.org/3/dj/projdoc/objectives_P802d3dj_240314.pdf Signed-off-by: Yael Chemla Reviewed-by: Shahar Shitrit Signed-off-by: Tariq Toukan Reviewed-by: Maxime Chevallier Link: https://patch.msgid.link/1763585297-1243980-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2025-09-18T18:26:06+00:00

Cross-merge networking fixes after downstream PR (net-6.17-rc7). No conflicts. Adjacent changes: drivers/net/ethernet/mellanox/mlx5/core/en/fs.h 9536fbe10c9d ("net/mlx5e: Add PSP steering in local NIC RX") 7601a0a46216 ("net/mlx5e: Add a miss level for ipsec crypto offload") Signed-off-by: Jakub Kicinski

net: ethtool: add get_rx_ring_count callback to optimize RX ring queries

2025-09-18T14:07:37+00:00

Add a new optional get_rx_ring_count callback in ethtool_ops to allow drivers to provide the number of RX rings directly without going through the full get_rxnfc flow classification interface. Create ethtool_get_rx_ring_count() to use .get_rx_ring_count if available, falling back to get_rxnfc() otherwise. It needs to be non-static, given it will be called by other ethtool functions laters, as those calling get_rxfh(). Signed-off-by: Breno Leitao Link: https://patch.msgid.link/20250917-gxrings-v4-4-dae520e2e1cb@debian.org Signed-off-by: Jakub Kicinski