kernel/linux.git/net/ethtool/common.c, branch v6.6.132

net: transfer rtnl_lock() requirement from ethtool_set_ethtool_phy_ops() to caller

2023-08-03T02:11:06+00:00

phy_init() and phy_exit() will have to do more stuff under rtnl_lock() in a future change. Since rtnl_unlock() -> netdev_run_todo() does a lot of stuff under the hood, it's a pity to lock and unlock the rtnetlink mutex twice in a row. Change the calling convention such that the only caller of ethtool_set_ethtool_phy_ops(), phy_device.c, provides a context where the rtnl_mutex is already acquired. Signed-off-by: Vladimir Oltean Link: https://lore.kernel.org/r/20230801142824.1772134-11-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

drivers/net/phy: add the link modes for the 10BASE-T1S Ethernet PHY

2023-01-11T08:35:02+00:00

This patch adds the link modes for the IEEE 802.3cg Clause 147 10BASE-T1S Ethernet PHY. According to the specifications, the 10BASE-T1S supports Point-To-Point Full-Duplex, Point-To-Point Half-Duplex and/or Point-To-Multipoint (AKA Multi-Drop) Half-Duplex operations. Signed-off-by: Piergiorgio Beruto Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net_tstamp: add SOF_TIMESTAMPING_OPT_ID_TCP

2022-12-09T03:49:21+00:00

Add an option to initialize SOF_TIMESTAMPING_OPT_ID for TCP from write_seq sockets instead of snd_una. This should have been the behavior from the start. Because processes may now exist that rely on the established behavior, do not change behavior of the existing option, but add the right behavior with a new flag. It is encouraged to always set SOF_TIMESTAMPING_OPT_ID_TCP on stream sockets along with the existing SOF_TIMESTAMPING_OPT_ID. Intuitively the contract is that the counter is zero after the setsockopt, so that the next write N results in a notification for the last byte N - 1. On idle sockets snd_una == write_seq and this holds for both. But on sockets with data in transmission, snd_una records the unacked offset in the stream. This depends on the ACK response from the peer. A process cannot learn this in a race free manner (ioctl SIOCOUTQ is one racy approach). write_seq records the offset at the last byte written by the process. This is a better starting point. It matches the intuitive contract in all circumstances, unaffected by external behavior. The new timestamp flag necessitates increasing sk_tsflags to 32 bits. Move the field in struct sock to avoid growing the socket (for some common CONFIG variants). The UAPI interface so_timestamping.flags is already int, so 32 bits wide. Reported-by: Sotirios Delimanolis Signed-off-by: Willem de Bruijn Link: https://lore.kernel.org/r/20221207143701.29861-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski

ethtool: Fail number of channels change when it conflicts with rxnfc

2022-11-08T11:08:44+00:00

Similar to what we do with the hash indirection table [1], when network flow classification rules are forwarding traffic to channels greater than the requested number of channels, fail the operation. Without this, traffic could be directed to channels which no longer exist (dropped) after changing number of channels. [1] commit d4ab4286276f ("ethtool: correctly ensure {GS}CHANNELS doesn't conflict with GS{RXFH}") Reviewed-by: Tariq Toukan Signed-off-by: Gal Pressman Link: https://lore.kernel.org/r/20221106123127.522985-1-gal@nvidia.com Signed-off-by: Paolo Abeni

ethtool: Add support for 800Gbps link modes

2022-10-24T09:43:39+00:00

Add support for 800Gbps speed, link modes of 100Gbps per lane. As mentioned in slide 21 in IEEE documentation [1], all adopted 802.3df copper and optical PMDs baselines using 100G/lane will be supported. Add the relevant PMDs which are mentioned in slide 5 in IEEE documentation [1] and were approved on 10-2022 [2]: BP - KR8 Cu Cable - CR8 MMF 50m - VR8 MMF 100m - SR8 SMF 500m - DR8 SMF 2km - DR8-2 [1]: https://www.ieee802.org/3/df/public/22_10/22_1004/shrikhande_3df_01a_221004.pdf [2]: https://ieee802.org/3/df/KeyMotions_3df_221005.pdf Signed-off-by: Amit Cohen Reviewed-by: Ido Schimmel Signed-off-by: Petr Machata Signed-off-by: David S. Miller

ethtool: Add 10base-T1L link mode entry

2022-05-01T16:45:35+00:00

Add entry for the 10base-T1L full duplex mode. Reviewed-by: Andrew Lunn Reviewed-by: Oleksij Rempel Signed-off-by: Alexandru Tachici Signed-off-by: David S. Miller

ethtool: add support to set/get tx copybreak buf size via ethtool

2021-11-22T12:31:47+00:00

Add support for ethtool to set/get tx copybreak buf size. Signed-off-by: Hao Chen Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller

net: sock: extend SO_TIMESTAMPING for PHC binding

2021-07-01T20:08:18+00:00

Since PTP virtual clock support is added, there can be several PTP virtual clocks based on one PTP physical clock for timestamping. This patch is to extend SO_TIMESTAMPING API to support PHC (PTP Hardware Clock) binding by adding a new flag SOF_TIMESTAMPING_BIND_PHC. When PTP virtual clocks are in use, user space can configure to bind one for timestamping, but PTP physical clock is not supported and not needed to bind. This patch is preparation for timestamp conversion from raw timestamp to a specific PTP virtual clock time in core net. Signed-off-by: Yangbo Lu Signed-off-by: David S. Miller

ethtool: add a new command for getting PHC virtual clocks

2021-07-01T20:08:18+00:00

Add an interface for getting PHC (PTP Hardware Clock) virtual clocks, which are based on PHC physical clock providing hardware timestamp to network packets. Signed-off-by: Yangbo Lu Signed-off-by: David S. Miller

ethtool: Add lanes parameter for ETHTOOL_LINK_MODE_10000baseR_FEC_BIT

2021-04-07T21:53:04+00:00

Lanes field is missing for ETHTOOL_LINK_MODE_10000baseR_FEC_BIT link mode and it causes a failure when trying to set 'speed 10000 lanes 1' on Spectrum-2 machines when autoneg is set to on. Add the lanes parameter for ETHTOOL_LINK_MODE_10000baseR_FEC_BIT link mode. Fixes: c8907043c6ac9 ("ethtool: Get link mode in use instead of speed and duplex parameters") Signed-off-by: Danielle Ratson Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller