kernel/linux.git/net/dsa/dsa2.c, branch linux-4.16.y

net: dsa: Do not register devlink for unused ports

2018-05-25T14:46:02+00:00

[ Upstream commit 5447d78623da2eded06d4cd9469d1a71eba43bc4 ] Even if commit 1d27732f411d ("net: dsa: setup and teardown ports") indicated that registering a devlink instance for unused ports is not a problem, and this is true, this can be confusing nonetheless, so let's not do it. Fixes: 1d27732f411d ("net: dsa: setup and teardown ports") Reported-by: Jiri Pirko Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: dsa: Support internal phy on 'cpu' port

2018-01-24T00:22:38+00:00

This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: assign a CPU port to DSA port

2017-12-05T23:01:34+00:00

DSA ports also need to have a dedicated CPU port assigned to them, because they need to know where to egress frames targeting the CPU, e.g. To_Cpu frames received on a Marvell Tag port. Signed-off-by: Vivien Didelot Signed-off-by: David S. Miller

net: dsa: fix 'increment on 0' warning

2017-11-25T19:23:10+00:00

Setting the refcount to 0 when allocating a tree to match the number of switch devices it holds may cause an 'increment on 0; use-after-free', if CONFIG_REFCOUNT_FULL is enabled. To fix this, do not decrement the refcount of a newly allocated tree, increment it when an already allocated tree is found, and decrement it after the probing of a switch, as done with the previous behavior. At the same time, make dsa_tree_get and dsa_tree_put accept a NULL argument to simplify callers, and return the tree after incrementation, as most kref users like of_node_get and of_node_put do. Fixes: 8e5bf9759a06 ("net: dsa: simplify tree reference counting") Signed-off-by: Vivien Didelot Reviewed-by: Florian Fainelli Tested-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: Pass a port to get_tag_protocol()

2017-11-13T01:34:54+00:00

A number of drivers want to check whether the configured CPU port is a possible configuration for enabling tagging, pass down the CPU port number so they verify that. Signed-off-by: Florian Fainelli Reviewed-by: Vivien Didelot Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: dsa: rename probe and remove switch functions

2017-11-09T00:26:49+00:00

This commit brings no functional changes. It gets rid of the underscore prefixed _dsa_register_switch and _dsa_unregister_switch functions in favor of dsa_switch_probe() which parses and adds a switch to a tree and dsa_switch_remove() which removes a switch from a tree. Signed-off-by: Vivien Didelot Signed-off-by: David S. Miller

net: dsa: setup a tree when adding a switch to it

2017-11-09T00:26:49+00:00

Now that the tree setup is centralized, we can simplify the code a bit more by setting up or tearing down the tree directly when adding or removing a switch to/from it. Signed-off-by: Vivien Didelot Signed-off-by: David S. Miller

net: dsa: setup routing table

2017-11-09T00:26:49+00:00

The *_complete() functions take too much arguments to do only one thing: they try to fetch the dsa_port structures corresponding to device nodes under the "link" list property of DSA ports, and use them to setup the routing table of switches. This patch simplifies them by providing instead simpler dsa_{port,switch,tree}_setup_routing_table functions which return a boolean value, true if the tree is complete. dsa_tree_setup_routing_table is called inside dsa_tree_setup which simplifies the switch registering function as well. A switch's routing table is now initialized before its setup. This also makes dsa_port_is_valid obsolete, remove it. Signed-off-by: Vivien Didelot Signed-off-by: David S. Miller

net: dsa: use of_for_each_phandle

2017-11-09T00:26:49+00:00

The OF code provides a of_for_each_phandle() helper to iterate over phandles. Use it instead of arbitrary iterating ourselves over the list of phandles hanging to the "link" property of the port's device node. The of_phandle_iterator_next() helper calls of_node_put() itself on it.node. Thus We must only do it ourselves if we break the loop. Signed-off-by: Vivien Didelot Signed-off-by: David S. Miller

net: dsa: add find port by node helper

2017-11-09T00:26:49+00:00

Instead of having two dsa_ds_find_port_dn (which returns a bool) and dsa_dst_find_port_dn (which returns a switch) functions, provide a more explicit dsa_tree_find_port_by_node function which returns a matching port. Signed-off-by: Vivien Didelot Signed-off-by: David S. Miller