kernel/linux.git/net/dccp, branch linux-6.0.y

dccp/tcp: Reset saddr on failure after inet6?_hash_connect().

2022-12-02T16:43:08+00:00

[ Upstream commit 77934dc6db0d2b111a8f2759e9ad2fb67f5cffa5 ] When connect() is called on a socket bound to the wildcard address, we change the socket's saddr to a local address. If the socket fails to connect() to the destination, we have to reset the saddr. However, when an error occurs after inet_hash6?_connect() in (dccp|tcp)_v[46]_conect(), we forget to reset saddr and leave the socket bound to the address. From the user's point of view, whether saddr is reset or not varies with errno. Let's fix this inconsistent behaviour. Note that after this patch, the repro [0] will trigger the WARN_ON() in inet_csk_get_port() again, but this patch is not buggy and rather fixes a bug papering over the bhash2's bug for which we need another fix. For the record, the repro causes -EADDRNOTAVAIL in inet_hash6_connect() by this sequence: s1 = socket() s1.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1) s1.bind(('127.0.0.1', 10000)) s1.sendto(b'hello', MSG_FASTOPEN, (('127.0.0.1', 10000))) # or s1.connect(('127.0.0.1', 10000)) s2 = socket() s2.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1) s2.bind(('0.0.0.0', 10000)) s2.connect(('127.0.0.1', 10000)) # -EADDRNOTAVAIL s2.listen(32) # WARN_ON(inet_csk(sk)->icsk_bind2_hash != tb2); [0]: https://syzkaller.appspot.com/bug?extid=015d756bbd1f8b5c8f09 Fixes: 3df80d9320bc ("[DCCP]: Introduce DCCPv6") Fixes: 7c657876b63c ("[DCCP]: Initial implementation") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima Acked-by: Joanne Koong Reviewed-by: Eric Dumazet Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock

2022-08-01T19:11:56+00:00

In the case of sk->dccps_qpolicy == DCCPQ_POLICY_PRIO, dccp_qpolicy_full will drop a skb when qpolicy is full. And the lock in dccp_sendmsg is released before sock_alloc_send_skb and then relocked after sock_alloc_send_skb. The following conditions may lead dccp_qpolicy_push to add skb to an already full sk_write_queue: thread1--->lock thread1--->dccp_qpolicy_full: queue is full. drop a skb thread1--->unlock thread2--->lock thread2--->dccp_qpolicy_full: queue is not full. no need to drop. thread2--->unlock thread1--->lock thread1--->dccp_qpolicy_push: add a skb. queue is full. thread1--->unlock thread2--->lock thread2--->dccp_qpolicy_push: add a skb! thread2--->unlock Fix this by moving dccp_qpolicy_full. Fixes: b1308dc015eb ("[DCCP]: Set TX Queue Length Bounds via Sysctl") Signed-off-by: Hangyu Hua Link: https://lore.kernel.org/r/20220729110027.40569-1-hbh25y@gmail.com Signed-off-by: Jakub Kicinski

Revert "net: Add a second bind table hashed by port and address"

2022-06-16T18:07:59+00:00

This reverts: commit d5a42de8bdbe ("net: Add a second bind table hashed by port and address") commit 538aaf9b2383 ("selftests: Add test for timing a bind request to a port with a populated bhash entry") Link: https://lore.kernel.org/netdev/20220520001834.2247810-1-kuba@kernel.org/ There are a few things that need to be fixed here: * Updating bhash2 in cases where the socket's rcv saddr changes * Adding bhash2 hashbucket locks Links to syzbot reports: https://lore.kernel.org/netdev/00000000000022208805e0df247a@google.com/ https://lore.kernel.org/netdev/0000000000003f33bc05dfaf44fe@google.com/ Fixes: d5a42de8bdbe ("net: Add a second bind table hashed by port and address") Reported-by: syzbot+015d756bbd1f8b5c8f09@syzkaller.appspotmail.com Reported-by: syzbot+98fd2d1422063b0f8c44@syzkaller.appspotmail.com Reported-by: syzbot+0a847a982613c6438fba@syzkaller.appspotmail.com Signed-off-by: Joanne Koong Link: https://lore.kernel.org/r/20220615193213.2419568-1-joannelkoong@gmail.com Signed-off-by: Jakub Kicinski

net: Add a second bind table hashed by port and address

2022-05-21T01:16:24+00:00

We currently have one tcp bind table (bhash) which hashes by port number only. In the socket bind path, we check for bind conflicts by traversing the specified port's inet_bind2_bucket while holding the bucket's spinlock (see inet_csk_get_port() and inet_csk_bind_conflict()). In instances where there are tons of sockets hashed to the same port at different addresses, checking for a bind conflict is time-intensive and can cause softirq cpu lockups, as well as stops new tcp connections since __inet_inherit_port() also contests for the spinlock. This patch proposes adding a second bind table, bhash2, that hashes by port and ip address. Searching the bhash2 table leads to significantly faster conflict resolution and less time holding the spinlock. Signed-off-by: Joanne Koong Reviewed-by: Eric Dumazet Acked-by: Kuniyuki Iwashima Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-05-19T18:23:59+00:00

drivers/net/ethernet/mellanox/mlx5/core/main.c b33886971dbc ("net/mlx5: Initialize flow steering during driver probe") 40379a0084c2 ("net/mlx5_fpga: Drop INNOVA TLS support") f2b41b32cde8 ("net/mlx5: Remove ipsec_ops function table") https://lore.kernel.org/all/20220519040345.6yrjromcdistu7vh@sx1/ 16d42d313350 ("net/mlx5: Drain fw_reset when removing device") 8324a02c342a ("net/mlx5: Add exit route when waiting for FW") https://lore.kernel.org/all/20220519114119.060ce014@canb.auug.org.au/ tools/testing/selftests/net/mptcp/mptcp_join.sh e274f7154008 ("selftests: mptcp: add subflow limits test-cases") b6e074e171bc ("selftests: mptcp: add infinite map testcase") 5ac1d2d63451 ("selftests: mptcp: Add tests for userspace PM type") https://lore.kernel.org/all/20220516111918.366d747f@canb.auug.org.au/ net/mptcp/options.c ba2c89e0ea74 ("mptcp: fix checksum byte order") 1e39e5a32ad7 ("mptcp: infinite mapping sending") ea66758c1795 ("tcp: allow MPTCP to update the announced window") https://lore.kernel.org/all/20220519115146.751c3a37@canb.auug.org.au/ net/mptcp/pm.c 95d686517884 ("mptcp: fix subflow accounting on close") 4d25247d3ae4 ("mptcp: bypass in-kernel PM restrictions for non-kernel PMs") https://lore.kernel.org/all/20220516111435.72f35dca@canb.auug.org.au/ net/mptcp/subflow.c ae66fb2ba6c3 ("mptcp: Do TCP fallback on early DSS checksum failure") 0348c690ed37 ("mptcp: add the fallback check") f8d4bcacff3b ("mptcp: infinite mapping receiving") https://lore.kernel.org/all/20220519115837.380bb8d4@canb.auug.org.au/ Signed-off-by: Jakub Kicinski

dccp: use READ_ONCE() to read sk->sk_bound_dev_if

2022-05-16T09:31:06+00:00

When reading listener sk->sk_bound_dev_if locklessly, we must use READ_ONCE(). Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller

Revert "tcp/dccp: get rid of inet_twsk_purge()"

2022-05-13T11:24:12+00:00

This reverts commits: 0dad4087a86a2cbe177404dc73f18ada26a2c390 ("tcp/dccp: get rid of inet_twsk_purge()") d507204d3c5cc57d9a8bdf0a477615bb59ea1611 ("tcp/dccp: add tw->tw_bslot") As Leonard pointed out, a newly allocated netns can happen to reuse a freed 'struct net'. While TCP TW timers were covered by my patches, other things were not: 1) Lookups in rx path (INET_MATCH() and INET6_MATCH()), as they look at 4-tuple plus the 'struct net' pointer. 2) /proc/net/tcp[6] and inet_diag, same reason. 3) hashinfo->bhash[], same reason. Fixing all this seems risky, lets instead revert. In the future, we might have a per netns tcp hash table, or a per netns list of timewait sockets... Fixes: 0dad4087a86a ("tcp/dccp: get rid of inet_twsk_purge()") Signed-off-by: Eric Dumazet Reported-by: Leonard Crestez Tested-by: Leonard Crestez Signed-off-by: David S. Miller

net: inet: Retire port only listening_hash

2022-05-12T23:52:18+00:00

The listen sk is currently stored in two hash tables, listening_hash (hashed by port) and lhash2 (hashed by port and address). After commit 0ee58dad5b06 ("net: tcp6: prefer listeners bound to an address") and commit d9fbc7f6431f ("net: tcp: prefer listeners bound to an address"), the TCP-SYN lookup fast path does not use listening_hash. The commit 05c0b35709c5 ("tcp: seq_file: Replace listening_hash with lhash2") also moved the seq_file (/proc/net/tcp) iteration usage from listening_hash to lhash2. There are still a few listening_hash usages left. One of them is inet_reuseport_add_sock() which uses the listening_hash to search a listen sk during the listen() system call. This turns out to be very slow on use cases that listen on many different VIPs at a popular port (e.g. 443). [ On top of the slowness in adding to the tail in the IPv6 case ]. The latter patch has a selftest to demonstrate this case. This patch takes this chance to move all remaining listening_hash usages to lhash2 and then retire listening_hash. Since most changes need to be done together, it is hard to cut the listening_hash to lhash2 switch into small patches. The changes in this patch is highlighted here for the review purpose. 1. Because of the listening_hash removal, lhash2 can use the sk->sk_nulls_node instead of the icsk->icsk_listen_portaddr_node. This will also keep the sk_unhashed() check to work as is after stop adding sk to listening_hash. The union is removed from inet_listen_hashbucket because only nulls_head is needed. 2. icsk->icsk_listen_portaddr_node and its helpers are removed. 3. The current lhash2 users needs to iterate with sk_nulls_node instead of icsk_listen_portaddr_node. One case is in the inet[6]_lhash2_lookup(). Another case is the seq_file iterator in tcp_ipv4.c. One thing to note is sk_nulls_next() is needed because the old inet_lhash2_for_each_icsk_continue() does a "next" first before iterating. 4. Move the remaining listening_hash usage to lhash2 inet_reuseport_add_sock() which this series is trying to improve. inet_diag.c and mptcp_diag.c are the final two remaining use cases and is moved to lhash2 now also. Signed-off-by: Martin KaFai Lau Reviewed-by: Eric Dumazet Signed-off-by: Jakub Kicinski

ipv4: Avoid using RTO_ONLINK with ip_route_connect().

2022-04-22T12:06:03+00:00

Now that ip_rt_fix_tos() doesn't reset ->flowi4_scope unconditionally, we don't have to rely on the RTO_ONLINK bit to properly set the scope of a flowi4 structure. We can just set ->flowi4_scope explicitly and avoid using RTO_ONLINK in ->flowi4_tos. This patch converts callers of ip_route_connect(). Instead of setting the tos parameter with RT_CONN_FLAGS(sk), as all callers do, we can: 1- Drop the tos parameter from ip_route_connect(): its value was entirely based on sk, which is also passed as parameter. 2- Set ->flowi4_scope depending on the SOCK_LOCALROUTE socket option instead of always initialising it with RT_SCOPE_UNIVERSE (let's define ip_sock_rt_scope() for this purpose). 3- Avoid overloading ->flowi4_tos with RTO_ONLINK: since the scope is now properly initialised, we don't need to tell ip_rt_fix_tos() to adjust ->flowi4_scope for us. So let's define ip_sock_rt_tos(), which is the same as RT_CONN_FLAGS() but without the RTO_ONLINK bit overload. Note: In the original ip_route_connect() code, __ip_route_output_key() might clear the RTO_ONLINK bit of fl4->flowi4_tos (because of ip_rt_fix_tos()). Therefore flowi4_update_output() had to reuse the original tos variable. Now that we don't set RTO_ONLINK any more, this is not a problem and we can use fl4->flowi4_tos in flowi4_update_output(). Signed-off-by: Guillaume Nault Reviewed-by: David Ahern Signed-off-by: David S. Miller

ipv6: Remove __ipv6_only_sock().

2022-04-22T11:47:50+00:00

Since commit 9fe516ba3fb2 ("inet: move ipv6only in sock_common"), ipv6_only_sock() and __ipv6_only_sock() are the same macro. Let's remove the one. Signed-off-by: Kuniyuki Iwashima Reviewed-by: David Ahern Signed-off-by: David S. Miller