kernel/linux.git/net/core, branch linux-5.3.y

xdp: obtain the mem_id mutex before trying to remove an entry.

2019-12-18T15:06:00+00:00

[ Upstream commit 86c76c09898332143be365c702cf8d586ed4ed21 ] A lockdep splat was observed when trying to remove an xdp memory model from the table since the mutex was obtained when trying to remove the entry, but not before the table walk started: Fix the splat by obtaining the lock before starting the table walk. Fixes: c3f812cea0d7 ("page_pool: do not release pool until inflight == 0.") Reported-by: Grygorii Strashko Signed-off-by: Jonathan Lemon Tested-by: Grygorii Strashko Acked-by: Jesper Dangaard Brouer Acked-by: Ilias Apalodimas Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

page_pool: do not release pool until inflight == 0.

2019-12-18T15:05:58+00:00

[ Upstream commit c3f812cea0d7006469d1cf33a4a9f0a12bb4b3a3 ] The page pool keeps track of the number of pages in flight, and it isn't safe to remove the pool until all pages are returned. Disallow removing the pool until all pages are back, so the pool is always available for page producers. Make the page pool responsible for its own delayed destruction instead of relying on XDP, so the page pool can be used without the xdp memory model. When all pages are returned, free the pool and notify xdp if the pool is registered with the xdp memory system. Have the callback perform a table walk since some drivers (cpsw) may share the pool among multiple xdp_rxq_info. Note that the increment of pages_state_release_cnt may result in inflight == 0, resulting in the pool being released. Fixes: d956a048cd3f ("xdp: force mem allocator removal and periodic warning") Signed-off-by: Jonathan Lemon Acked-by: Jesper Dangaard Brouer Acked-by: Ilias Apalodimas Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: Fixed updating of ethertype in skb_mpls_push()

2019-12-18T15:05:56+00:00

[ Upstream commit d04ac224b1688f005a84f764cfe29844f8e9da08 ] The skb_mpls_push was not updating ethertype of an ethernet packet if the packet was originally received from a non ARPHRD_ETHER device. In the below OVS data path flow, since the device corresponding to port 7 is an l3 device (ARPHRD_NONE) the skb_mpls_push function does not update the ethertype of the packet even though the previous push_eth action had added an ethernet header to the packet. recirc_id(0),in_port(7),eth_type(0x0800),ipv4(tos=0/0xfc,ttl=64,frag=no), actions:push_eth(src=00:00:00:00:00:00,dst=00:00:00:00:00:00), push_mpls(label=13,tc=0,ttl=64,bos=1,eth_type=0x8847),4 Fixes: 8822e270d697 ("net: core: move push MPLS functionality from OvS to core helper") Signed-off-by: Martin Varghese Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

Fixed updating of ethertype in function skb_mpls_pop

2019-12-18T15:05:55+00:00

[ Upstream commit 040b5cfbcefa263ccf2c118c4938308606bb7ed8 ] The skb_mpls_pop was not updating ethertype of an ethernet packet if the packet was originally received from a non ARPHRD_ETHER device. In the below OVS data path flow, since the device corresponding to port 7 is an l3 device (ARPHRD_NONE) the skb_mpls_pop function does not update the ethertype of the packet even though the previous push_eth action had added an ethernet header to the packet. recirc_id(0),in_port(7),eth_type(0x8847), mpls(label=12/0xfffff,tc=0/0,ttl=0/0x0,bos=1/1), actions:push_eth(src=00:00:00:00:00:00,dst=00:00:00:00:00:00), pop_mpls(eth_type=0x800),4 Fixes: ed246cee09b9 ("net: core: move pop MPLS functionality from OvS to core helper") Signed-off-by: Martin Varghese Acked-by: Pravin B Shelar Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: ipv6_stub: use ip6_dst_lookup_flow instead of ip6_dst_lookup

2019-12-18T15:05:50+00:00

[ Upstream commit 6c8991f41546c3c472503dff1ea9daaddf9331c2 ] ipv6_stub uses the ip6_dst_lookup function to allow other modules to perform IPv6 lookups. However, this function skips the XFRM layer entirely. All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the ip_route_output_key and ip_route_output helpers) for their IPv4 lookups, which calls xfrm_lookup_route(). This patch fixes this inconsistent behavior by switching the stub to ip6_dst_lookup_flow, which also calls xfrm_lookup_route(). This requires some changes in all the callers, as these two functions take different arguments and have different return types. Fixes: 5f81bd2e5d80 ("ipv6: export a stub for IPv6 symbols used by vxlan") Reported-by: Xiumei Mu Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: dsa: fix flow dissection on Tx path

2019-12-18T15:05:41+00:00

[ Upstream commit 8bef0af09a5415df761b04fa487a6c34acae74bc ] Commit 43e665287f93 ("net-next: dsa: fix flow dissection") added an ability to override protocol and network offset during flow dissection for DSA-enabled devices (i.e. controllers shipped as switch CPU ports) in order to fix skb hashing for RPS on Rx path. However, skb_hash() and added part of code can be invoked not only on Rx, but also on Tx path if we have a multi-queued device and: - kernel is running on UP system or - XPS is not configured. The call stack in this two cases will be like: dev_queue_xmit() -> __dev_queue_xmit() -> netdev_core_pick_tx() -> netdev_pick_tx() -> skb_tx_hash() -> skb_get_hash(). The problem is that skbs queued for Tx have both network offset and correct protocol already set up even after inserting a CPU tag by DSA tagger, so calling tag_ops->flow_dissect() on this path actually only breaks flow dissection and hashing. This can be observed by adding debug prints just before and right after tag_ops->flow_dissect() call to the related block of code: Before the patch: Rx path (RPS): [ 19.240001] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 19.244271] tag_ops->flow_dissect() [ 19.247811] Rx: proto: 0x0800, nhoff: 8 /* ETH_P_IP */ [ 19.215435] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 19.219746] tag_ops->flow_dissect() [ 19.223241] Rx: proto: 0x0806, nhoff: 8 /* ETH_P_ARP */ [ 18.654057] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 18.658332] tag_ops->flow_dissect() [ 18.661826] Rx: proto: 0x8100, nhoff: 8 /* ETH_P_8021Q */ Tx path (UP system): [ 18.759560] Tx: proto: 0x0800, nhoff: 26 /* ETH_P_IP */ [ 18.763933] tag_ops->flow_dissect() [ 18.767485] Tx: proto: 0x920b, nhoff: 34 /* junk */ [ 22.800020] Tx: proto: 0x0806, nhoff: 26 /* ETH_P_ARP */ [ 22.804392] tag_ops->flow_dissect() [ 22.807921] Tx: proto: 0x920b, nhoff: 34 /* junk */ [ 16.898342] Tx: proto: 0x86dd, nhoff: 26 /* ETH_P_IPV6 */ [ 16.902705] tag_ops->flow_dissect() [ 16.906227] Tx: proto: 0x920b, nhoff: 34 /* junk */ After: Rx path (RPS): [ 16.520993] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 16.525260] tag_ops->flow_dissect() [ 16.528808] Rx: proto: 0x0800, nhoff: 8 /* ETH_P_IP */ [ 15.484807] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 15.490417] tag_ops->flow_dissect() [ 15.495223] Rx: proto: 0x0806, nhoff: 8 /* ETH_P_ARP */ [ 17.134621] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 17.138895] tag_ops->flow_dissect() [ 17.142388] Rx: proto: 0x8100, nhoff: 8 /* ETH_P_8021Q */ Tx path (UP system): [ 15.499558] Tx: proto: 0x0800, nhoff: 26 /* ETH_P_IP */ [ 20.664689] Tx: proto: 0x0806, nhoff: 26 /* ETH_P_ARP */ [ 18.565782] Tx: proto: 0x86dd, nhoff: 26 /* ETH_P_IPV6 */ In order to fix that we can add the check 'proto == htons(ETH_P_XDSA)' to prevent code from calling tag_ops->flow_dissect() on Tx. I also decided to initialize 'offset' variable so tagger callbacks can now safely leave it untouched without provoking a chaos. Fixes: 43e665287f93 ("net-next: dsa: fix flow dissection") Signed-off-by: Alexander Lobakin Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

inet: protect against too small mtu values.

2019-12-18T15:05:38+00:00

[ Upstream commit 501a90c945103e8627406763dac418f20f3837b2 ] syzbot was once again able to crash a host by setting a very small mtu on loopback device. Let's make inetdev_valid_mtu() available in include/net/ip.h, and use it in ip_setup_cork(), so that we protect both ip_append_page() and __ip_append_data() Also add a READ_ONCE() when the device mtu is read. Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(), even if other code paths might write over this field. Add a big comment in include/linux/netdevice.h about dev->mtu needing READ_ONCE()/WRITE_ONCE() annotations. Hopefully we will add the missing ones in followup patches. [1] refcount_t: saturated; leaking memory. WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 panic+0x2e3/0x75c kernel/panic.c:221 __warn.cold+0x2f/0x3e kernel/panic.c:582 report_bug+0x289/0x300 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:174 [inline] fixup_bug arch/x86/kernel/traps.c:169 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89 RSP: 0018:ffff88809689f550 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1 R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001 R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40 refcount_add include/linux/refcount.h:193 [inline] skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999 sock_wmalloc+0xf1/0x120 net/core/sock.c:2096 ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383 udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276 inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821 kernel_sendpage+0x92/0xf0 net/socket.c:3794 sock_sendpage+0x8b/0xc0 net/socket.c:936 pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458 splice_from_pipe_feed fs/splice.c:512 [inline] __splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636 splice_from_pipe+0x108/0x170 fs/splice.c:671 generic_splice_sendpage+0x3c/0x50 fs/splice.c:842 do_splice_from fs/splice.c:861 [inline] direct_splice_actor+0x123/0x190 fs/splice.c:1035 splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990 do_splice_direct+0x1da/0x2a0 fs/splice.c:1078 do_sendfile+0x597/0xd00 fs/read_write.c:1464 __do_sys_sendfile64 fs/read_write.c:1525 [inline] __se_sys_sendfile64 fs/read_write.c:1511 [inline] __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x441409 Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409 RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005 RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010 R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180 R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 1470ddf7f8ce ("inet: Remove explicit write references to sk/inet in ip_append_data") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: skmsg: fix TLS 1.3 crash with full sk_msg

2019-12-04T21:34:23+00:00

[ Upstream commit 031097d9e079e40dce401031d1012e83d80eaf01 ] TLS 1.3 started using the entry at the end of the SG array for chaining-in the single byte content type entry. This mostly works: [ E E E E E E . . ] ^ ^ start end E < content type / [ E E E E E E C . ] ^ ^ start end (Where E denotes a populated SG entry; C denotes a chaining entry.) If the array is full, however, the end will point to the start: [ E E E E E E E E ] ^ start end And we end up overwriting the start: E < content type / [ C E E E E E E E ] ^ start end The sg array is supposed to be a circular buffer with start and end markers pointing anywhere. In case where start > end (i.e. the circular buffer has "wrapped") there is an extra entry reserved at the end to chain the two halves together. [ E E E E E E . . l ] (Where l is the reserved entry for "looping" back to front. As suggested by John, let's reserve another entry for chaining SG entries after the main circular buffer. Note that this entry has to be pointed to by the end entry so its position is not fixed. Examples of full messages: [ E E E E E E E E . l ] ^ ^ start end <---------------. [ E E . E E E E E E l ] ^ ^ end start Now the end will always point to an unused entry, so TLS 1.3 can always use it. Fixes: 130b392c6cd6 ("net: tls: Add tls 1.3 support") Signed-off-by: Jakub Kicinski Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: rtnetlink: prevent underflows in do_setvfinfo()

2019-11-29T09:07:33+00:00

[ Upstream commit d658c8f56ec7b3de8051a24afb25da9ba3c388c5 ] The "ivm->vf" variable is a u32, but the problem is that a number of drivers cast it to an int and then forget to check for negatives. An example of this is in the cxgb4 driver. drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c 2890 static int cxgb4_mgmt_get_vf_config(struct net_device *dev, 2891 int vf, struct ifla_vf_info *ivi) ^^^^^^ 2892 { 2893 struct port_info *pi = netdev_priv(dev); 2894 struct adapter *adap = pi->adapter; 2895 struct vf_info *vfinfo; 2896 2897 if (vf >= adap->num_vfs) ^^^^^^^^^^^^^^^^^^^ 2898 return -EINVAL; 2899 vfinfo = &adap->vfinfo[vf]; ^^^^^^^^^^^^^^^^^^^^^^^^^^ There are 48 functions affected. drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8435 hclge_set_vf_vlan_filter() warn: can 'vfid' underflow 's32min-2147483646' drivers/net/ethernet/freescale/enetc/enetc_pf.c:377 enetc_pf_set_vf_mac() warn: can 'vf' underflow 's32min-2147483646' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2899 cxgb4_mgmt_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2960 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3019 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3038 cxgb4_mgmt_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3086 cxgb4_mgmt_set_vf_link_state() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb/cxgb2.c:791 get_eeprom() warn: can 'i' underflow 's32min-(-4),0,4-s32max' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:82 bnxt_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:164 bnxt_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:186 bnxt_get_vf_config() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:228 bnxt_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:264 bnxt_set_vf_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:293 bnxt_set_vf_bw() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:333 bnxt_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2281 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2285 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2286 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2292 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2297 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1832 qlcnic_sriov_set_vf_mac() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1864 qlcnic_sriov_set_vf_tx_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1937 qlcnic_sriov_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2005 qlcnic_sriov_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2036 qlcnic_sriov_set_vf_spoofchk() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/emulex/benet/be_main.c:1914 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1915 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1922 be_set_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1951 be_clear_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2063 be_set_vf_tx_rate() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2091 be_set_vf_link_state() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:2609 ice_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3050 ice_get_vf_cfg() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3103 ice_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3181 ice_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3237 ice_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3286 ice_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3919 i40e_validate_vf() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3957 i40e_ndo_set_vf_mac() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4104 i40e_ndo_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4263 i40e_ndo_set_vf_bw() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4309 i40e_ndo_get_vf_config() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4371 i40e_ndo_set_vf_link_state() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4504 i40e_ndo_set_vf_trust() warn: can 'vf_id' underflow 's32min-2147483646' Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

devlink: Add method for time-stamp on reporter's dump

2019-11-20T15:49:01+00:00

[ Upstream commit d279505b723cba058b604ed8cf9cd4c854e2a041 ] When setting the dump's time-stamp, use ktime_get_real in addition to jiffies. This simplifies the user space implementation and bypasses some inconsistent behavior with translating jiffies to current time. The time taken is transformed into nsec, to comply with y2038 issue. Fixes: c8e1da0bf923 ("devlink: Add health report functionality") Signed-off-by: Aya Levin Acked-by: Jiri Pirko Acked-by: Arnd Bergmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman