kernel/linux.git/net/core/pktgen.c, branch linux-5.3.y

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-06-07T18:00:14+00:00

Some ISDN files that got removed in net-next had some changes done in mainline, take the removals. Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-06-07T16:29:14+00:00

Pull networking fixes from David Miller: 1) Free AF_PACKET po->rollover properly, from Willem de Bruijn. 2) Read SFP eeprom in max 16 byte increments to avoid problems with some SFP modules, from Russell King. 3) Fix UDP socket lookup wrt. VRF, from Tim Beale. 4) Handle route invalidation properly in s390 qeth driver, from Julian Wiedmann. 5) Memory leak on unload in RDS, from Zhu Yanjun. 6) sctp_process_init leak, from Neil HOrman. 7) Fix fib_rules rule insertion semantic change that broke Android, from Hangbin Liu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) pktgen: do not sleep with the thread lock held. net: mvpp2: Use strscpy to handle stat strings net: rds: fix memory leak in rds_ib_flush_mr_pool ipv6: fix EFAULT on sendto with icmpv6 and hdrincl ipv6: use READ_ONCE() for inet->hdrincl as in ipv4 Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied" net: aquantia: fix wol configuration not applied sometimes ethtool: fix potential userspace buffer overflow Fix memory leak in sctp_process_init net: rds: fix memory leak when unload rds_rdma ipv6: fix the check before getting the cookie in rt6_get_cookie ipv4: not do cache for local delivery if bc_forwarding is enabled s390/qeth: handle error when updating TX queue count s390/qeth: fix VLAN attribute in bridge_hostnotify udev event s390/qeth: check dst entry before use s390/qeth: handle limited IPv4 broadcast in L3 TX path net: fix indirect calls helpers for ptype list hooks. net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set udp: only choose unbound UDP socket for multicast when not in a VRF net/tls: replace the sleeping lock around RX resync with a bit lock ...

pktgen: do not sleep with the thread lock held.

2019-06-06T18:31:35+00:00

Currently, the process issuing a "start" command on the pktgen procfs interface, acquires the pktgen thread lock and never release it, until all pktgen threads are completed. The above can blocks indefinitely any other pktgen command and any (even unrelated) netdevice removal - as the pktgen netdev notifier acquires the same lock. The issue is demonstrated by the following script, reported by Matteo: ip -b - <<'EOF' link add type dummy link add type veth link set dummy0 up EOF modprobe pktgen echo reset >/proc/net/pktgen/pgctrl { echo rem_device_all echo add_device dummy0 } >/proc/net/pktgen/kpktgend_0 echo count 0 >/proc/net/pktgen/dummy0 echo start >/proc/net/pktgen/pgctrl & sleep 1 rmmod veth Fix the above releasing the thread lock around the sleep call. Additionally we must prevent racing with forcefull rmmod - as the thread lock no more protects from them. Instead, acquire a self-reference before waiting for any thread. As a side effect, running rmmod pktgen while some thread is running now fails with "module in use" error, before this patch such command hanged indefinitely. Note: the issue predates the commit reported in the fixes tag, but this fix can't be applied before the mentioned commit. v1 -> v2: - no need to check for thread existence after flipping the lock, pktgen threads are freed only at net exit time - Fixes: 6146e6a43b35 ("[PKTGEN]: Removes thread_{un,}lock() macros.") Reported-and-tested-by: Matteo Croce Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller

net: ipv4: provide __rcu annotation for ifa_list

2019-06-03T01:08:36+00:00

ifa_list is protected by rcu, yet code doesn't reflect this. Add the __rcu annotations and fix up all places that are now reported by sparse. I've done this in the same commit to not add intermediate patches that result in new warnings. Reported-by: Eric Dumazet Signed-off-by: Florian Westphal Signed-off-by: David S. Miller

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

xfrm: remove output indirection from xfrm_mode

2019-04-08T07:14:28+00:00

Same is input indirection. Only exception: we need to export xfrm_outer_mode_output for pktgen. Increases size of vmlinux by about 163 byte: Before: text data bss dec filename 15730208 6936948 4046908 26714064 vmlinux After: 15730311 6937008 4046908 26714227 vmlinux xfrm_inner_extract_output has no more external callers, make it static. v2: add IS_ENABLED(IPV6) guard in xfrm6_prepare_output add two missing breaks in xfrm_outer_mode_output (Sabrina Dubroca) add WARN_ON_ONCE for 'call AF_INET6 related output function, but CONFIG_IPV6=n' case. make xfrm_inner_extract_output static Signed-off-by: Florian Westphal Reviewed-by: Sabrina Dubroca Signed-off-by: Steffen Klassert

mm: replace all open encodings for NUMA_NO_NODE

2019-03-06T05:07:14+00:00

Patch series "Replace all open encodings for NUMA_NO_NODE", v3. All these places for replacement were found by running the following grep patterns on the entire kernel code. Please let me know if this might have missed some instances. This might also have replaced some false positives. I will appreciate suggestions, inputs and review. 1. git grep "nid == -1" 2. git grep "node == -1" 3. git grep "nid = -1" 4. git grep "node = -1" This patch (of 2): At present there are multiple places where invalid node number is encoded as -1. Even though implicitly understood it is always better to have macros in there. Replace these open encodings for an invalid node number with the global macro NUMA_NO_NODE. This helps remove NUMA related assumptions like 'invalid node' from various places redirecting them to a common definition. Link: http://lkml.kernel.org/r/1545127933-10711-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual Reviewed-by: David Hildenbrand Acked-by: Jeff Kirsher [ixgbe] Acked-by: Jens Axboe [mtip32xx] Acked-by: Vinod Koul [dmaengine.c] Acked-by: Michael Ellerman [powerpc] Acked-by: Doug Ledford [drivers/infiniband] Cc: Joseph Qi Cc: Hans Verkuil Cc: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

pktgen: Fix fall-through annotation

2018-09-13T22:36:41+00:00

Replace "fallthru" with a proper "fall through" annotation. This fix is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by: Gustavo A. R. Silva Signed-off-by: David S. Miller

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next

2018-07-27T16:33:37+00:00

Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2018-07-27 1) Extend the output_mark to also support the input direction and masking the mark values before applying to the skb. 2) Add a new lookup key for the upcomming xfrm interfaces. 3) Extend the xfrm lookups to match xfrm interface IDs. 4) Add virtual xfrm interfaces. The purpose of these interfaces is to overcome the design limitations that the existing VTI devices have. The main limitations that we see with the current VTI are the following: VTI interfaces are L3 tunnels with configurable endpoints. For xfrm, the tunnel endpoint are already determined by the SA. So the VTI tunnel endpoints must be either the same as on the SA or wildcards. In case VTI tunnel endpoints are same as on the SA, we get a one to one correlation between the SA and the tunnel. So each SA needs its own tunnel interface. On the other hand, we can have only one VTI tunnel with wildcard src/dst tunnel endpoints in the system because the lookup is based on the tunnel endpoints. The existing tunnel lookup won't work with multiple tunnels with wildcard tunnel endpoints. Some usecases require more than on VTI tunnel of this type, for example if somebody has multiple namespaces and every namespace requires such a VTI. VTI needs separate interfaces for IPv4 and IPv6 tunnels. So when routing to a VTI, we have to know to which address family this traffic class is going to be encapsulated. This is a lmitation because it makes routing more complex and it is not always possible to know what happens behind the VTI, e.g. when the VTI is move to some namespace. VTI works just with tunnel mode SAs. We need generic interfaces that ensures transfomation, regardless of the xfrm mode and the encapsulated address family. VTI is configured with a combination GRE keys and xfrm marks. With this we have to deal with some extra cases in the generic tunnel lookup because the GRE keys on the VTI are actually not GRE keys, the GRE keys were just reused for something else. All extensions to the VTI interfaces would require to add even more complexity to the generic tunnel lookup. So to overcome this, we developed xfrm interfaces with the following design goal: It should be possible to tunnel IPv4 and IPv6 through the same interface. No limitation on xfrm mode (tunnel, transport and beet). Should be a generic virtual interface that ensures IPsec transformation, no need to know what happens behind the interface. Interfaces should be configured with a new key that must match a new policy/SA lookup key. The lookup logic should stay in the xfrm codebase, no need to change or extend generic routing and tunnel lookups. Should be possible to use IPsec hardware offloads of the underlying interface. 5) Remove xfrm pcpu policy cache. This was added after the flowcache removal, but it turned out to make things even worse. From Florian Westphal. 6) Allow to update the set mark on SA updates. From Nathan Harold. 7) Convert some timestamps to time64_t. From Arnd Bergmann. 8) Don't check the offload_handle in xfrm code, it is an opaque data cookie for the driver. From Shannon Nelson. 9) Remove xfrmi interface ID from flowi. After this pach no generic code is touched anymore to do xfrm interface lookups. From Benedict Wong. 10) Allow to update the xfrm interface ID on SA updates. From Nathan Harold. 11) Don't pass zero to ERR_PTR() in xfrm_resolve_and_create_bundle. From YueHaibing. 12) Return more detailed errors on xfrm interface creation. From Benedict Wong. 13) Use PTR_ERR_OR_ZERO instead of IS_ERR + PTR_ERR. From the kbuild test robot. ==================== Signed-off-by: David S. Miller

pktgen: convert safe uses of strncpy() to strcpy() to avoid string truncation warning

2018-07-18T22:24:04+00:00

GCC 8 complains: net/core/pktgen.c: In function ‘pktgen_if_write’: net/core/pktgen.c:1419:4: warning: ‘strncpy’ output may be truncated copying between 0 and 31 bytes from a string of length 127 [-Wstringop-truncation] strncpy(pkt_dev->src_max, buf, len); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ net/core/pktgen.c:1399:4: warning: ‘strncpy’ output may be truncated copying between 0 and 31 bytes from a string of length 127 [-Wstringop-truncation] strncpy(pkt_dev->src_min, buf, len); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ net/core/pktgen.c:1290:4: warning: ‘strncpy’ output may be truncated copying between 0 and 31 bytes from a string of length 127 [-Wstringop-truncation] strncpy(pkt_dev->dst_max, buf, len); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ net/core/pktgen.c:1268:4: warning: ‘strncpy’ output may be truncated copying between 0 and 31 bytes from a string of length 127 [-Wstringop-truncation] strncpy(pkt_dev->dst_min, buf, len); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ There is no bug here, but the code is not perfect either. It copies sizeof(pkt_dev->/member/) - 1 from user space into buf, and then does a strcmp(pkt_dev->/member/, buf) hence assuming buf will be null-terminated and shorter than pkt_dev->/member/ (pkt_dev->/member/ is never explicitly null-terminated, and strncpy() doesn't have to null-terminate so the assumption must be on buf). The use of strncpy() without explicit null-termination looks suspicious. Convert to use straight strcpy(). strncpy() would also null-pad the output, but that's clearly unnecessary since the author calls memset(pkt_dev->/member/, 0, sizeof(..)); prior to strncpy(), anyway. While at it format the code for "dst_min", "dst_max", "src_min" and "src_max" in the same way by removing extra new lines in one case. Signed-off-by: Jakub Kicinski Reviewed-by: Jiong Wang Signed-off-by: David S. Miller