kernel/linux.git/net/core/dev.c, branch linux-6.0.y

net: add atomic_long_t to net_device_stats fields

2022-12-31T12:26:44+00:00

[ Upstream commit 6c1c5097781f563b70a81683ea6fdac21637573b ] Long standing KCSAN issues are caused by data-race around some dev->stats changes. Most performance critical paths already use per-cpu variables, or per-queue ones. It is reasonable (and more correct) to use atomic operations for the slow paths. This patch adds an union for each field of net_device_stats, so that we can convert paths that are not yet protected by a spinlock or a mutex. netdev_stats_to_stats64() no longer has an #if BITS_PER_LONG==64 Note that the memcpy() we were using on 64bit arches had no provision to avoid load-tearing, while atomic_long_read() is providing the needed protection at no cost. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: Remove the obsolte u64_stats_fetch_*_irq() users (net).

2022-12-31T12:26:12+00:00

[ Upstream commit d120d1a63b2c484d6175873d8ee736a633f74b70 ] Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner Signed-off-by: Sebastian Andrzej Siewior Acked-by: Peter Zijlstra (Intel) Signed-off-by: Jakub Kicinski Stable-dep-of: 1dbd8d9a82e3 ("ipvs: use u64_stats_t for the per-cpu counters") Signed-off-by: Sasha Levin

net: Fix return value of qdisc ingress handling on success

2022-10-29T08:08:35+00:00

[ Upstream commit 672e97ef689a38cb20c2cc6a1814298fea34461e ] Currently qdisc ingress handling (sch_handle_ingress()) doesn't set a return value and it is left to the old return value of the caller (__netif_receive_skb_core()) which is RX drop, so if the packet is consumed, caller will stop and return this value as if the packet was dropped. This causes a problem in the kernel tcp stack when having a egress tc rule forwarding to a ingress tc rule. The tcp stack sending packets on the device having the egress rule will see the packets as not successfully transmitted (although they actually were), will not advance it's internal state of sent data, and packets returning on such tcp stream will be dropped by the tcp stack with reason ack-of-unsent-data. See reproduction in [0] below. Fix that by setting the return value to RX success if the packet was handled successfully. [0] Reproduction steps: $ ip link add veth1 type veth peer name peer1 $ ip link add veth2 type veth peer name peer2 $ ifconfig peer1 5.5.5.6/24 up $ ip netns add ns0 $ ip link set dev peer2 netns ns0 $ ip netns exec ns0 ifconfig peer2 5.5.5.5/24 up $ ifconfig veth2 0 up $ ifconfig veth1 0 up #ingress forwarding veth1 <-> veth2 $ tc qdisc add dev veth2 ingress $ tc qdisc add dev veth1 ingress $ tc filter add dev veth2 ingress prio 1 proto all flower \ action mirred egress redirect dev veth1 $ tc filter add dev veth1 ingress prio 1 proto all flower \ action mirred egress redirect dev veth2 #steal packet from peer1 egress to veth2 ingress, bypassing the veth pipe $ tc qdisc add dev peer1 clsact $ tc filter add dev peer1 egress prio 20 proto ip flower \ action mirred ingress redirect dev veth1 #run iperf and see connection not running $ iperf3 -s& $ ip netns exec ns0 iperf3 -c 5.5.5.6 -i 1 #delete egress rule, and run again, now should work $ tc filter del dev peer1 egress $ ip netns exec ns0 iperf3 -c 5.5.5.6 -i 1 Fixes: f697c3e8b35c ("[NET]: Avoid unnecessary cloning for ingress filtering") Signed-off-by: Paul Blakey Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: Fix a data-race around netdev_unregister_timeout_secs.

2022-08-24T12:46:58+00:00

While reading netdev_unregister_timeout_secs, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 5aa3afe107d9 ("net: make unregister netdev warning timeout configurable") Signed-off-by: Kuniyuki Iwashima Acked-by: Dmitry Vyukov Signed-off-by: David S. Miller

net: Fix a data-race around netdev_budget_usecs.

2022-08-24T12:46:58+00:00

While reading netdev_budget_usecs, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 7acf8a1e8a28 ("Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller

net: Fix a data-race around netdev_budget.

2022-08-24T12:46:58+00:00

While reading netdev_budget, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 51b0bdedb8e7 ("[NET]: Separate two usages of netdev_max_backlog.") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller

net: Fix data-races around netdev_tstamp_prequeue.

2022-08-24T12:46:57+00:00

While reading netdev_tstamp_prequeue, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 3b098e2d7c69 ("net: Consistent skb timestamping") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller

net: Fix data-races around netdev_max_backlog.

2022-08-24T12:46:57+00:00

While reading netdev_max_backlog, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. While at it, we remove the unnecessary spaces in the doc. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller

net: Fix data-races around weight_p and dev_weight_[rt]x_bias.

2022-08-24T12:46:57+00:00

While reading weight_p, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Also, dev_[rt]x_weight can be read/written at the same time. So, we need to use READ_ONCE() and WRITE_ONCE() for its access. Moreover, to use the same weight_p while changing dev_[rt]x_weight, we add a mutex in proc_do_dev_weight(). Fixes: 3d48b53fb2ae ("net: dev_weight: TX/RX orthogonality") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller

Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

2022-07-22T23:55:44+00:00

Daniel Borkmann says: ==================== bpf-next 2022-07-22 We've added 73 non-merge commits during the last 12 day(s) which contain a total of 88 files changed, 3458 insertions(+), 860 deletions(-). The main changes are: 1) Implement BPF trampoline for arm64 JIT, from Xu Kuohai. 2) Add ksyscall/kretsyscall section support to libbpf to simplify tracing kernel syscalls through kprobe mechanism, from Andrii Nakryiko. 3) Allow for livepatch (KLP) and BPF trampolines to attach to the same kernel function, from Song Liu & Jiri Olsa. 4) Add new kfunc infrastructure for netfilter's CT e.g. to insert and change entries, from Kumar Kartikeya Dwivedi & Lorenzo Bianconi. 5) Add a ksym BPF iterator to allow for more flexible and efficient interactions with kernel symbols, from Alan Maguire. 6) Bug fixes in libbpf e.g. for uprobe binary path resolution, from Dan Carpenter. 7) Fix BPF subprog function names in stack traces, from Alexei Starovoitov. 8) libbpf support for writing custom perf event readers, from Jon Doron. 9) Switch to use SPDX tag for BPF helper man page, from Alejandro Colomar. 10) Fix xsk send-only sockets when in busy poll mode, from Maciej Fijalkowski. 11) Reparent BPF maps and their charging on memcg offlining, from Roman Gushchin. 12) Multiple follow-up fixes around BPF lsm cgroup infra, from Stanislav Fomichev. 13) Use bootstrap version of bpftool where possible to speed up builds, from Pu Lehui. 14) Cleanup BPF verifier's check_func_arg() handling, from Joanne Koong. 15) Make non-prealloced BPF map allocations low priority to play better with memcg limits, from Yafang Shao. 16) Fix BPF test runner to reject zero-length data for skbs, from Zhengchao Shao. 17) Various smaller cleanups and improvements all over the place. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (73 commits) bpf: Simplify bpf_prog_pack_[size|mask] bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch) bpf, x64: Allow to use caller address from stack ftrace: Allow IPMODIFY and DIRECT ops on the same function ftrace: Add modify_ftrace_direct_multi_nolock bpf/selftests: Fix couldn't retrieve pinned program in xdp veth test bpf: Fix build error in case of !CONFIG_DEBUG_INFO_BTF selftests/bpf: Fix test_verifier failed test in unprivileged mode selftests/bpf: Add negative tests for new nf_conntrack kfuncs selftests/bpf: Add tests for new nf_conntrack kfuncs selftests/bpf: Add verifier tests for trusted kfunc args net: netfilter: Add kfuncs to set and change CT status net: netfilter: Add kfuncs to set and change CT timeout net: netfilter: Add kfuncs to allocate and insert CT net: netfilter: Deduplicate code in bpf_{xdp,skb}_ct_lookup bpf: Add documentation for kfuncs bpf: Add support for forcing kfunc args to be trusted bpf: Switch to new kfunc flags infrastructure tools/resolve_btfids: Add support for 8-byte BTF sets bpf: Introduce 8-byte BTF set ... ==================== Link: https://lore.kernel.org/r/20220722221218.29943-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski