kernel/linux.git/net/can, branch v7.1.6

can: j1939: fix lockless local-destination check

2026-08-03T09:25:23+00:00

[ Upstream commit e4e8af62adab2fdcca230006f829407a953070cd ] j1939_priv.ents[].nusers is documented as protected by priv->lock, and its updates already happen under that lock. j1939_can_recv() also reads it under read_lock_bh(). However, j1939_session_skb_queue() and j1939_tp_send() still read priv->ents[da].nusers without taking the lock. Those transport-side checks decide whether to set J1939_ECU_LOCAL_DST, so they can race with j1939_local_ecu_get() and j1939_local_ecu_put() while userspace is binding or releasing sockets concurrently with TP traffic. This can misclassify TP/ETP sessions as local or remote and take the wrong transport path. Fix both transport paths by routing the destination-locality check through a helper that reads ents[].nusers under read_lock_bh(&priv->lock). Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Shuhao Fu Tested-by: Oleksij Rempel Acked-by: Oleksij Rempel Link: https://patch.msgid.link/20260419140614.GA4041240@chcpu16 Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: raw: add locking for raw flags bitfield

2026-08-03T09:25:22+00:00

[ Upstream commit 1e5185c090589f4146d728ab36417d8a5419f127 ] With commit 890e5198a6e5 ("can: raw: use bitfields to store flags in struct raw_sock") the formerly separate integer values have been integrated into a single bitfield. This led to a read-modify-write operation when changing a flag in raw_setsockopt() which now needs a locking to prevent concurrent access. Instead of adding a lock/unlock hell in each of the flag manipulations this patch introduces a wrapper for a new raw_setsockopt_locked() function analogue to the isotp_setsockopt[_locked]() approach in net/can/isotp.c Fixes: 890e5198a6e5 ("can: raw: use bitfields to store flags in struct raw_sock") Reported-by: Eulgyu Kim Closes: https://lore.kernel.org/linux-can/20260503112200.22727-1-eulgyukim@snu.ac.kr/ Tested-by: Eulgyu Kim Signed-off-by: Oliver Hartkopp Reviewed-by: Vincent Mailhol Tested-by: Vincent Mailhol Link: https://patch.msgid.link/20260504111928.41856-1-socketcan@hartkopp.net [mkl: use Closes tag instead of Link] Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: bcm: add missing device refcount for CAN filter removal

2026-07-24T14:21:09+00:00

commit d59948293ea34b6337ce2b5febab8510de70048c upstream. sashiko-bot remarked a problem with a concurrent device unregistration in isotp.c which also is present in the bcm.c code. A former fix for raw.c commit c275a176e4b6 ("can: raw: add missing refcount for memory leak fix") introduced a netdevice_tracker which solves the issue for bcm.c too. bcm_release(), bcm_delete_rx_op() and bcm_notifier() relied on dev_get_by_index(ifindex) to re-find the device for an rx_op before unregistering its filter. If a concurrent NETDEV_UNREGISTER has already unlisted the device from the ifindex table, that lookup fails and can_rx_unregister() is silently skipped, leaving a stale CAN filter pointing at the soon-to-be-freed bcm_op/socket. Hold a netdev_hold()/netdev_put() tracked reference on op->rx_reg_dev from the moment the rx filter is registered in bcm_rx_setup() until it is unregistered in bcm_rx_unreg(), and use that reference directly in bcm_release() and bcm_delete_rx_op() instead of re-looking the device up by ifindex. Reported-by: sashiko-bot@kernel.org Closes: https://sashiko.dev/#/patchset/20260707094716.63578-1-socketcan@hartkopp.net Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol") Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260714-bcm_fixes-v15-8-562f7e3e42da@hartkopp.net Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: bcm: validate frame length in bcm_rx_setup() for RTR replies

2026-07-24T14:21:09+00:00

commit 62ec41f364648be79d54d94d0d240ee326948afd upstream. bcm_tx_setup() validates cf->len against the CAN/CAN FD DLC limits before installing frames for TX_SETUP, but bcm_rx_setup() never did the same for the RTR-reply frame configured via RX_SETUP with RX_RTR_FRAME. Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol") Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260714-bcm_fixes-v15-7-562f7e3e42da@hartkopp.net Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: bcm: track a single source interface for ANYDEV timeout/throttle ops

2026-07-24T14:21:09+00:00

commit 2f5976f54a04e9f18b25283036ac3136be453b17 upstream. An ANYDEV rx op (ifindex == 0) with an active RX timeout and/or throttle timer has no defined semantics when matching frames arrive from several interfaces: bcm_rx_handler() can run concurrently for the same op on different CPUs, racing hrtimer_cancel()/ bcm_rx_starttimer() against bcm_rx_timeout_handler() and causing spurious RX_TIMEOUT notifications and last_frames corruption. The same concurrency lets throttled multiplex frames from different interfaces clobber the single rx_ifindex/rx_stamp fields shared by the op. Add op->if_detected to track the first interface that delivers a matching frame while a timeout/throttle timer is configured, and reject frames from any other interface for that op. The claim is decided in bcm_rx_handler() before hrtimer_cancel() touches op->timer, so a rejected frame can never disturb the claimed interface's watchdog. RTR-mode ops are excluded via RX_RTR_FRAME, independent of kt_ival1/kt_ival2, since those may briefly hold a stale value from an earlier non-RTR configuration. The claim is released in bcm_notify() on NETDEV_UNREGISTER and in bcm_rx_setup() when SETTIMER reconfigures the timer values. A (re-)claim is only possible on CAN devices in NETREG_REGISTERED dev->reg_state to cover the release in bcm_notify() where reg_state becomes NETREG_UNREGISTERING until synchronize_net(). Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol") Reported-by: sashiko-bot@kernel.org Closes: https://lore.kernel.org/linux-can/20260709105031.1A39C1F000E9@smtp.kernel.org/ Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260714-bcm_fixes-v15-11-562f7e3e42da@hartkopp.net Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: bcm: fix stale rx/tx ops after device removal

2026-07-24T14:21:09+00:00

commit 3b762c0d950383ab7a002686c9136b9aa55d2d70 upstream. RX: an RX_SETUP update(!) for an existing op skipped can_rx_register() unconditionally, even when a concurrent NETDEV_UNREGISTER had already torn down its registration (op->rx_reg_dev == NULL). This silently did not re-enable frame delivery for that updated filter. bcm_rx_setup() now re-registers in that case, while leaving rx_ops with ifindex = 0 (all CAN devices) which never carry a tracked rx_reg_dev registered as-is. TX: bcm_notify() only handled bo->rx_ops on NETDEV_UNREGISTER, leaving tx_ops with an active cyclic transmission re-arming its hrtimer indefinitely to execute bcm_tx_timeout_handler(). Cancelling the hrtimer prevents the runaway timer and any injection into a later reused ifindex, since nothing else calls bcm_can_tx() for the op until an explicit TX_SETUP update re-arms it. Unlike bcm_rx_unreg(), which clears the tracked rx_reg_dev for rx_ops, the ifindex is intentionally left unchanged for tx_ops. bcm_tx_setup() always rejects ifindex 0, so clearing it would strand the op: neither a later TX_SETUP (bcm_find_op()) nor TX_DELETE (bcm_delete_tx_op()) could ever find it again, since both require an exact ifindex match. Reported-by: sashiko-bot@kernel.org Closes: https://lore.kernel.org/linux-can/20260708094536.DDF821F00A3A@smtp.kernel.org/ Closes: https://lore.kernel.org/linux-can/20260708154039.347ED1F000E9@smtp.kernel.org/ Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol") Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260714-bcm_fixes-v15-9-562f7e3e42da@hartkopp.net Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler()

2026-07-24T14:21:09+00:00

commit 58fd6cbc8541216af1d7ed272ea7ac2b66d50fd8 upstream. For an rx op subscribed on all interfaces (ifindex == 0), the same op is registered once in the shared per-netns wildcard filter list, so bcm_rx_handler() can run concurrently on different CPUs for frames arriving on different net devices. op->rx_stamp and op->rx_ifindex were written before bcm_rx_update_lock was taken, allowing concurrent writers to race each other - including a torn store of the 64-bit rx_stamp on 32-bit platforms. Beyond a torn store bcm_send_to_user() must report the timestamp/ifindex of the very same frame whose content it is delivering. So the assignment is placed in the same unbroken bcm_rx_update_lock section as the content comparison. As a side effect, the RTR-request frame feature (which never reach bcm_send_to_user()) no longer updates rx_stamp/rx_ifindex, since only the notification path needs them. Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol") Reported-by: sashiko-bot@kernel.org Closes: https://lore.kernel.org/linux-can/20260707145135.5BC831F00A3A@smtp.kernel.org/ Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260714-bcm_fixes-v15-10-562f7e3e42da@hartkopp.net Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: bcm: fix CAN frame rx/tx statistics

2026-07-24T14:21:09+00:00

commit e6c24ba95fc3f1b5e1dcd28b1c6e59ef61a9daa5 upstream. KCSAN detected a data race within the bcm_rx_handler() when two CAN frames have been simultaneously received and processed in a single rx op by two different CPUs. Use atomic operations with (signed) long data types to access the statistics in the hot path to fix the KCSAN complaint. Additionally simplify the update and check of statistics overflow by using the atomic operations in separate bcm_update_[rx|tx]_stats() functions. The rx variant runs under bcm_rx_update_lock to prevent races when resetting the two rx counters; the tx variant runs under bcm_tx_lock and only needs to guard its own counter's overflow. As the rx path resets its values already at LONG_MAX / 100, there is no conflict between the two locking domains (bcm_rx_update_lock vs. bcm_tx_lock) even for ops that use both paths. The rx statistics update and the frames_filtered update in bcm_rx_changed() were previously performed in two separate bcm_rx_update_lock sections. For an rx op subscribed on all interfaces (ifindex == 0), bcm_rx_handler() can run concurrently on different CPUs, so a counter reset by one CPU between these two sections could leave frames_filtered larger than frames_abs on another CPU, producing a bogus (even negative) reduction percentage in procfs. Update the statistics in the same critical section as bcm_rx_changed() to close this gap, which also removes the now unneeded extra lock/unlock pair around the traffic_flags calculation. Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol") Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260714-bcm_fixes-v15-4-562f7e3e42da@hartkopp.net Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: bcm: extend bcm_tx_lock usage for data and timer updates

2026-07-24T14:21:09+00:00

commit 12ce799f7ab1e05bd8fbf79e46f403bfe5597ebc upstream. Stage new CAN frame content for an existing tx op into a kmalloc()'d buffer and validate it there, mirroring the approach already used in bcm_rx_setup(). Only copy the validated data into op->frames while holding op->bcm_tx_lock, so bcm_can_tx() and bcm_tx_timeout_handler() can no longer observe a partially updated or unvalidated frame. Add a missing error path for memcpy_from_msg() when copying CAN frame data from userspace. Also move the kt_ival1/kt_ival2/ival1/ival2 updates in bcm_tx_setup() under op->bcm_tx_lock, and read kt_ival1/kt_ival2/count under the same lock in bcm_tx_set_expiry() and bcm_tx_timeout_handler(), closing the torn 64-bit ktime_t read on 32-bit platforms. Fixes: c2aba69d0c36 ("can: bcm: add locking for bcm_op runtime updates") Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260714-bcm_fixes-v15-6-562f7e3e42da@hartkopp.net Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: bcm: add missing rcu list annotations and operations

2026-07-24T14:21:09+00:00

commit 7b2c3eabc4dafc062a25e10711154f2107526a78 upstream. sashiko-bot remarked the missing use of list_add_rcu() in bcm_[rx|tx]_setup() to have a proper initialized bcm_op structure when bcm_proc_show() traverses the bcm_op's under rcu_read_lock(). To cover all initial settings of the bcm_op's the list_add_rcu() calls are moved to the end of the setup code. While at it, also fix the mirroring removal side: bcm_release() called bcm_remove_op() - which frees the op via call_rcu() - on ops that were still linked in bo->tx_ops/bo->rx_ops, without list_del_rcu() first. Unlink each op with list_del_rcu() before handing it to bcm_remove_op(), matching the existing pattern in bcm_delete_tx_op()/bcm_delete_rx_op(). Reported-by: sashiko-reviews@lists.linux.dev Closes: https://lore.kernel.org/linux-can/20260610094654.A1FFE1F00893@smtp.kernel.org/ Fixes: dac5e6249159 ("can: bcm: add missing rcu read protection for procfs content") Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260714-bcm_fixes-v15-5-562f7e3e42da@hartkopp.net Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman